Indexable Tools

Sort by
Picture of TUNGALOY MCTR28.00XM40-10 28mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR28.00XM40-10 28mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR28.00XM40-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR27.00XM40-10 27mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR27.00XM40-10 27mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR27.00XM40-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR26.00XM40-10 26mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR26.00XM40-10 26mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR26.00XM40-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR25.00XM32-10 25mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR25.00XM32-10 25mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR25.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR24.00XM32-10 24mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR24.00XM32-10 24mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR24.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR23.00XM32-10 23mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR23.00XM32-10 23mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR23.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR22.00XM32-10 22mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR22.00XM32-10 22mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR22.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR21.00XM32-10 21mm Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR21.00XM32-10 21mm Drill body for lathes and machining centers, L/D = 10

ISO: MCTR21.00XM32-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR22.23XU31.75-10 7/8" Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR22.23XU31.75-10 7/8" Drill body for lathes and machining centers, L/D = 10

ISO: MCTR22.23XU31.75-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR25.40XU31.75-10 1" Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR25.40XU31.75-10 1" Drill body for lathes and machining centers, L/D = 10

ISO: MCTR25.40XU31.75-10

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR23.80XU31.75-10 0.937" Drill body for lathes and machining centers, L/D = 10

TUNGALOY MCTR23.80XU31.75-10 0.937" Drill body for lathes and machining centers, L/D = 10

ISO: MCTR23.80XU31.75-10

Call (262) 251-4020 for pricing
Picture of ISCAR MNCNT 125-800-MF16X1-T2 0.492" Indexable SUMOCHAM Inserts and Modular Shank GunDrill s

ISCAR MNCNT 125-800-MF16X1-T2 0.492" Indexable SUMOCHAM Inserts and Modular Shank GunDrill s

ISO: MNCNT 125-800-MF16X1-T2

Call (262) 251-4020 for pricing
Picture of ISCAR SD S-A-L7.00-C.625-SP15-C SH 0.5906 OAL 7.1920 Replacable Head Acc. Extension Carbide Single End T-Slot

ISCAR SD S-A-L7.00-C.625-SP15-C SH 0.5906 OAL 7.1920 Replacable Head Acc. Extension Carbide Single End T-Slot

Call (262) 251-4020 for pricing
Picture of INGERSOLL 22J3D-0701484R01 Milling Cutter 90.0°, Corn Cob 0.750 Weldon 0.7500 3 Flute Coolant 0.86 Max DOC 3.500 OAL

INGERSOLL 22J3D-0701484R01 Milling Cutter 90.0°, Corn Cob 0.750 Weldon 0.7500 3 Flute Coolant 0.86 Max DOC 3.500 OAL

ANSI: 22J3D-0701484R01

ISO: 22J3D-0701484R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0945F1250-8 0.945" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0945F1250-8 0.945" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0945F1250-8

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0906F1250-8 0.906" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0906F1250-8 0.906" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0906F1250-8

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID240F32-8 24mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID240F32-8 24mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID240F32-8

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID230F32-8 23mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID230F32-8 23mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID230F32-8

Call (262) 251-4020 for pricing
Picture of TUNGALOY ERC12R050M42.0-05 Milling Cutter Button Cutter 1.967 Cutter Diameter Cylindrical Shank1.6535 5.905 OAL 5 Flute

TUNGALOY ERC12R050M42.0-05 Milling Cutter Button Cutter 1.967 Cutter Diameter Cylindrical Shank1.6535 5.905 OAL 5 Flute

ANSI: ERC12R050M42.0-05

ISO: ERC12R050M42.0-05

Call (262) 251-4020 for pricing
Picture of ISCAR F90LN D2.50-06-1.00-R-N11 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.750 OAL 6 Flute

ISCAR F90LN D2.50-06-1.00-R-N11 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.750 OAL 6 Flute

ANSI: F90LN D2.50-06-1.00-R-N11

ISO: F90LN D2.50-06-1.00-R-N11

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Machine Taper HSK63

INGERSOLL Hole Making Mill Boring Boring Head Machine Taper HSK63

ISO: HSK-A63MHD50.120

Call (262) 251-4020 for pricing
Picture of INGERSOLL DN5H-30R01 Milling Cutter 45.0° 3.000 Shell Arbor 1.0000 10 Flute Coolant 0.235 Max DOC 1.750 OAL

INGERSOLL DN5H-30R01 Milling Cutter 45.0° 3.000 Shell Arbor 1.0000 10 Flute Coolant 0.235 Max DOC 1.750 OAL

ANSI: DN5H-30R01

ISO: DN5H-30R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1312F-4 1.312" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU1312F-4 1.312" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU1312F-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1250F-4 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU1250F-4 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU1250F-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS330F40-4 33mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS330F40-4 33mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS330F40-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS320F32-4 32mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS320F32-4 32mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS320F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS310F32-4 31mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS310F32-4 31mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS310F32-4

Call (262) 251-4020 for pricing
Picture of ISCAR MS 16-JHP Cut Off,Grooving,Groove Turning Blade Holder

ISCAR MS 16-JHP Cut Off,Grooving,Groove Turning Blade Holder

ANSI: MS 16-JHP

ISO: MS 16-JHP

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1312FS-04 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1312FS-04 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1312FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1250FS-04 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1250FS-04 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1250FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX330F40-4 33mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX330F40-4 33mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX330F40-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX320F32-4 32mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX320F32-4 32mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX320F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX310F32-4 31mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX310F32-4 31mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX310F32-4

Call (262) 251-4020 for pricing
Picture of EVEREDE Tool CH8115L Trigon Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

EVEREDE Tool CH8115L Trigon Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

ANSI: CH8115L

ISO: CH8115L

Call (262) 251-4020 for pricing
Picture of EVEREDE Tool CH8115 Trigon Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

EVEREDE Tool CH8115 Trigon Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

ANSI: CH8115

ISO: CH8115

Call (262) 251-4020 for pricing
Picture of EVEREDE Tool CH8110L Trigon Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

EVEREDE Tool CH8110L Trigon Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

ANSI: CH8110L

ISO: CH8110L

Call (262) 251-4020 for pricing
Picture of EVEREDE Tool CH8110 Trigon Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

EVEREDE Tool CH8110 Trigon Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

ANSI: CH8110

ISO: CH8110

Call (262) 251-4020 for pricing
Picture of TUNGALOY T32U-PCLNR12C Boring Bar 80.0° Insert Steel Round 1.259 Shank

TUNGALOY T32U-PCLNR12C Boring Bar 80.0° Insert Steel Round 1.259 Shank

ANSI: T32U-PCLNR12C

ISO: T32U-PCLNR12C

Call (262) 251-4020 for pricing
Picture of TUNGALOY SFP4005R Milling Cutter 4.921 Cutter Diameter Shell Arbor 1.5000 2 Flute

TUNGALOY SFP4005R Milling Cutter 4.921 Cutter Diameter Shell Arbor 1.5000 2 Flute

ANSI: SFP4005R

ISO: SFP4005R

Call (262) 251-4020 for pricing
Picture of PARLEC PC2-3215 Boring Head Finish Boring Head

PARLEC PC2-3215 Boring Head Finish Boring Head

ANSI: PC2-3215

ISO: PC2-3215

Call (262) 251-4020 for pricing
Picture of ISCAR MF FHX D2.50-06-1.00-R06 Milling Cutter Feed Mill 2.500 Diameter Face Mill 1.000 1.750 OAL 6 Flute

ISCAR MF FHX D2.50-06-1.00-R06 Milling Cutter Feed Mill 2.500 Diameter Face Mill 1.000 1.750 OAL 6 Flute

ANSI: MF FHX D2.50-06-1.00-R06

ISO: MF FHX D2.50-06-1.00-R06

Call (262) 251-4020 for pricing
Picture of INGERSOLL 22J7Q-1202281R01 Milling Cutter 90.0°, Corn Cob 1.250 Cylindrical 1.2500 2 Flute 1.73 Max DOC 4.500 OAL

INGERSOLL 22J7Q-1202281R01 Milling Cutter 90.0°, Corn Cob 1.250 Cylindrical 1.2500 2 Flute 1.73 Max DOC 4.500 OAL

ANSI: 22J7Q-1202281R01

ISO: 22J7Q-1202281R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3500175N6R01 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

INGERSOLL LD3500175N6R01 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

ISO: LD3500175N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3400170N6R01 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

INGERSOLL LD3400170N6R01 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

ISO: LD3400170N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3300165N6R01 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

INGERSOLL LD3300165N6R01 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

ISO: LD3300165N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3200160N6R01 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

INGERSOLL LD3200160N6R01 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

ISO: LD3200160N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3100155N6R01 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

INGERSOLL LD3100155N6R01 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

ISO: LD3100155N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3500175JHR00 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

INGERSOLL LD3500175JHR00 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

ISO: LD3500175JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3400170JHR00 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

INGERSOLL LD3400170JHR00 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

ISO: LD3400170JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3300165JHR00 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

INGERSOLL LD3300165JHR00 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

ISO: LD3300165JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3200160JHR00 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

INGERSOLL LD3200160JHR00 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

ISO: LD3200160JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3100155JGR00 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

INGERSOLL LD3100155JGR00 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

ISO: LD3100155JGR00

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M1200D300Z09S100HN09 45.0° Milling Cutter 3.433 Cutter Diameter Face Mill 1.000

WIDIA/KENNAMETAL M1200D300Z09S100HN09 45.0° Milling Cutter 3.433 Cutter Diameter Face Mill 1.000

ANSI: M1200D300Z09S100HN09

ISO: M1200D300Z09S100HN09

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M1200D125Z10HN09 45.0° Milling Cutter 5.351 Cutter Diameter Face Mill 1.574

WIDIA/KENNAMETAL M1200D125Z10HN09 45.0° Milling Cutter 5.351 Cutter Diameter Face Mill 1.574

ANSI: M1200D125Z10HN09

ISO: M1200D125Z10HN09

Call (262) 251-4020 for pricing
Picture of ISCAR HM90 F90A D3.00-5-1.00 Milling Cutter 90.0° 3.000 Diameter Face Mill 1.000 1.750 OAL 5 Flute

ISCAR HM90 F90A D3.00-5-1.00 Milling Cutter 90.0° 3.000 Diameter Face Mill 1.000 1.750 OAL 5 Flute

ANSI: HM90 F90A D3.00-5-1.00

ISO: HM90 F90A D3.00-5-1.00

Call (262) 251-4020 for pricing
Picture of INGERSOLL DM6G-30R01 Milling Cutter 70.0° 3.000 Shell Arbor 1.0000 7 Flute Coolant 0.23 Max DOC 1.750 OAL

INGERSOLL DM6G-30R01 Milling Cutter 70.0° 3.000 Shell Arbor 1.0000 7 Flute Coolant 0.23 Max DOC 1.750 OAL

ANSI: DM6G-30R01

ISO: DM6G-30R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL 2J1G-30R01 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 7 Flute Coolant 0.63 Max DOC 1.750 OAL

INGERSOLL 2J1G-30R01 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 7 Flute Coolant 0.63 Max DOC 1.750 OAL

ANSI: 2J1G-30R01

ISO: 2J1G-30R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY TXLN06U2.50B0.75R06 Milling Cutter 2.500 Cutter Diameter Cylindrical Shank0.7500 6 Flute

TUNGALOY TXLN06U2.50B0.75R06 Milling Cutter 2.500 Cutter Diameter Cylindrical Shank0.7500 6 Flute

ANSI: TXLN06U2.50B0.75R06

ISO: TXLN06U2.50B0.75R06

Call (262) 251-4020 for pricing
Picture of TUNGALOY TXLN06M063B22.0R06 Milling Cutter 2.480 Cutter Diameter Shell Arbor 0.8661 6 Flute

TUNGALOY TXLN06M063B22.0R06 Milling Cutter 2.480 Cutter Diameter Shell Arbor 0.8661 6 Flute

ANSI: TXLN06M063B22.0R06

ISO: TXLN06M063B22.0R06

Call (262) 251-4020 for pricing
Picture of TUNGALOY TPA15R300U0100A06 Milling Cutter 90.0° 3.000 Cutter Diameter Shell Arbor 1.0000 6 Flute

TUNGALOY TPA15R300U0100A06 Milling Cutter 90.0° 3.000 Cutter Diameter Shell Arbor 1.0000 6 Flute

ANSI: TPA15R300U0100A06

ISO: TPA15R300U0100A06

Call (262) 251-4020 for pricing
Picture of TUNGALOY TPA15R080M27.0E06 Milling Cutter 90.0° 3.150 Cutter Diameter Shell Arbor 0.6300 6 Flute

TUNGALOY TPA15R080M27.0E06 Milling Cutter 90.0° 3.150 Cutter Diameter Shell Arbor 0.6300 6 Flute

ANSI: TPA15R080M27.0E06

ISO: TPA15R080M27.0E06

Call (262) 251-4020 for pricing
Picture of TUNGALOY TPA15R080M25.4-06 Milling Cutter 90.0° 3.150 Cutter Diameter Shell Arbor 1.0000 6 Flute

TUNGALOY TPA15R080M25.4-06 Milling Cutter 90.0° 3.150 Cutter Diameter Shell Arbor 1.0000 6 Flute

ANSI: TPA15R080M25.4-06

ISO: TPA15R080M25.4-06

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1339R5SL150 TDMX Drill BODY D1.339 5XD SL

WIDIA/KENNAMETAL TDMX1339R5SL150 TDMX Drill BODY D1.339 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1260R5SL150 TDMX Drill BODY D1.260 5XD SL

WIDIA/KENNAMETAL TDMX1260R5SL150 TDMX Drill BODY D1.260 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX340R5SL40M TDMX Drill BODY D=34MM 5XD SL

WIDIA/KENNAMETAL TDMX340R5SL40M TDMX Drill BODY D=34MM 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX320R5SL40M TDMX Drill BODY D=32MM 5XD SL

WIDIA/KENNAMETAL TDMX320R5SL40M TDMX Drill BODY D=32MM 5XD SL

Call (262) 251-4020 for pricing
Picture of INGERSOLL YD2400192C8R01 0.9449 (24.0 mm) QwikTwist Body

INGERSOLL YD2400192C8R01 0.9449 (24.0 mm) QwikTwist Body

ISO: YD2400192C8R01

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL VSM490D080Z07S27XN15 90.0° Milling Cutter 3.150 Cutter Diameter Face Mill 1.063

WIDIA/KENNAMETAL VSM490D080Z07S27XN15 90.0° Milling Cutter 3.150 Cutter Diameter Face Mill 1.063

ANSI: VSM490D080Z07S27XN15

ISO: VSM490D080Z07S27XN15

Call (262) 251-4020 for pricing
Picture of ISCAR A-SVQNL 24-4-AL-JHP Turning Boring Bar 35.0° Insert 1.500 Boring Bar

ISCAR A-SVQNL 24-4-AL-JHP Turning Boring Bar 35.0° Insert 1.500 Boring Bar

ANSI: A-SVQNL 24-4-AL-JHP

ISO: A-SVQNL 24-4-AL-JHP

Call (262) 251-4020 for pricing
Picture of ISCAR A-SVQNR 24-4-AL-JHP Turning Boring Bar 35.0° Insert 1.500 Boring Bar

ISCAR A-SVQNR 24-4-AL-JHP Turning Boring Bar 35.0° Insert 1.500 Boring Bar

ANSI: A-SVQNR 24-4-AL-JHP

ISO: A-SVQNR 24-4-AL-JHP

Call (262) 251-4020 for pricing
Picture of TUNGALOY EPW13R080M32.0-04 Milling Cutter 90.0° 3.150 Cutter Diameter Cylindrical Shank1.2598 4.724 OAL 4 Flute

TUNGALOY EPW13R080M32.0-04 Milling Cutter 90.0° 3.150 Cutter Diameter Cylindrical Shank1.2598 4.724 OAL 4 Flute

ANSI: EPW13R080M32.0-04

ISO: EPW13R080M32.0-04

Call (262) 251-4020 for pricing
Picture of INGERSOLL TN1N-30R01 Milling Cutter 45.0° 3.000 Shell Arbor 1.0000 5 Flute 0.33 Max DOC 1.750 OAL

INGERSOLL TN1N-30R01 Milling Cutter 45.0° 3.000 Shell Arbor 1.0000 5 Flute 0.33 Max DOC 1.750 OAL

ANSI: TN1N-30R01

ISO: TN1N-30R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL TJ6N-30R01 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.59 Max DOC 1.750 OAL

INGERSOLL TJ6N-30R01 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.59 Max DOC 1.750 OAL

ANSI: TJ6N-30R01

ISO: TJ6N-30R01

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M200D400Z05S125RN64 Button Cutter Milling Cutter 4.000 Cutter Diameter Face Mill 1.250

WIDIA/KENNAMETAL M200D400Z05S125RN64 Button Cutter Milling Cutter 4.000 Cutter Diameter Face Mill 1.250

ANSI: M200D400Z05S125RN64

ISO: M200D400Z05S125RN64

Call (262) 251-4020 for pricing
Picture of ISCAR T890HT FLND2.5-07-1.0-R13 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.750 OAL 7 Flute

ISCAR T890HT FLND2.5-07-1.0-R13 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.750 OAL 7 Flute

ANSI: T890HT FLND2.5-07-1.0-R13

ISO: T890HT FLND2.5-07-1.0-R13

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0445134N6R01 1.750 (44.45 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0445134N6R01 1.750 (44.45 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0445134N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0437131N6R01 1.719 (43.66 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0437131N6R01 1.719 (43.66 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0437131N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0428128N6R01 1.687 (42.85 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0428128N6R01 1.687 (42.85 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0428128N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0413124N6R01 1.625 (41.28 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0413124N6R01 1.625 (41.28 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0413124N6R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1181F1250-5 1.181" Drill ForceMeister TIS L/D=5 Indexable head Drill

TUNGALOY TISU1181F1250-5 1.181" Drill ForceMeister TIS L/D=5 Indexable head Drill

ISO: TISU1181F1250-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1142F1250-5 1.142" Drill ForceMeister TIS L/D=5 Indexable head Drill

TUNGALOY TISU1142F1250-5 1.142" Drill ForceMeister TIS L/D=5 Indexable head Drill

ISO: TISU1142F1250-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS300F32-5 30mm Drill ForceMeister TIS L/D=5 Indexable head Drill

TUNGALOY TIS300F32-5 30mm Drill ForceMeister TIS L/D=5 Indexable head Drill

ISO: TIS300F32-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS290F32-5 29mm Drill ForceMeister TIS L/D=5 Indexable head Drill

TUNGALOY TIS290F32-5 29mm Drill ForceMeister TIS L/D=5 Indexable head Drill

ISO: TIS290F32-5

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL E08R-SDUPR2 55.0° Insert Boring Bar 0.500

WIDIA/KENNAMETAL E08R-SDUPR2 55.0° Insert Boring Bar 0.500

ANSI: E08R-SDUPR2

ISO: E08RSDUPR2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TGP4104RIA Milling Cutter 75.0° 3.937 Cutter Diameter Shell Arbor 1.2500 6 Flute

TUNGALOY TGP4104RIA Milling Cutter 75.0° 3.937 Cutter Diameter Shell Arbor 1.2500 6 Flute

ANSI: TGP4104RIA

ISO: TGP4104RIA

Call (262) 251-4020 for pricing
Picture of ISCAR FF FWX D2.50-06-1.00-07 Milling Cutter 2.500 Diameter Face Mill 1.000 1.750 OAL 6 Flute

ISCAR FF FWX D2.50-06-1.00-07 Milling Cutter 2.500 Diameter Face Mill 1.000 1.750 OAL 6 Flute

ANSI: FF FWX D2.50-06-1.00-07

ISO: FF FWX D2.50-06-1.00-07

Call (262) 251-4020 for pricing
Picture of TUNGALOY TAN07R063M22.0E06 Milling Cutter 43.0° 2.480 Cutter Diameter Shell Arbor 0.8661 6 Flute

TUNGALOY TAN07R063M22.0E06 Milling Cutter 43.0° 2.480 Cutter Diameter Shell Arbor 0.8661 6 Flute

ANSI: TAN07R063M22.0E06

ISO: TAN07R063M22.0E06

Call (262) 251-4020 for pricing
Picture of TUNGALOY TAN07R063M22.0E05 Milling Cutter 43.0° 2.480 Cutter Diameter Shell Arbor 0.8661 5 Flute

TUNGALOY TAN07R063M22.0E05 Milling Cutter 43.0° 2.480 Cutter Diameter Shell Arbor 0.8661 5 Flute

ANSI: TAN07R063M22.0E05

ISO: TAN07R063M22.0E05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TAN07R250U0075A05 Milling Cutter 43.0° 2.500 Cutter Diameter Shell Arbor 0.7500 5 Flute

TUNGALOY TAN07R250U0075A05 Milling Cutter 43.0° 2.500 Cutter Diameter Shell Arbor 0.7500 5 Flute

ANSI: TAN07R250U0075A05

ISO: TAN07R250U0075A05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TAN07R080M25.4-06 Milling Cutter 43.0° 3.150 Cutter Diameter Shell Arbor 1.0000 6 Flute

TUNGALOY TAN07R080M25.4-06 Milling Cutter 43.0° 3.150 Cutter Diameter Shell Arbor 1.0000 6 Flute

ANSI: TAN07R080M25.4-06

ISO: TAN07R080M25.4-06

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M1200D300Z06S100HN09 45.0° Milling Cutter 3.433 Cutter Diameter Face Mill 1.000

WIDIA/KENNAMETAL M1200D300Z06S100HN09 45.0° Milling Cutter 3.433 Cutter Diameter Face Mill 1.000

ANSI: M1200D300Z06S100HN09

ISO: M1200D300Z06S100HN09

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M1200D080Z09HN09 45.0° Milling Cutter 3.582 Cutter Diameter Face Mill 1.063

WIDIA/KENNAMETAL M1200D080Z09HN09 45.0° Milling Cutter 3.582 Cutter Diameter Face Mill 1.063

ANSI: M1200D080Z09HN09

ISO: M1200D080Z09HN09

Call (262) 251-4020 for pricing
Picture of ISCAR F90LN D2.50-05-1.00-R-N15 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.750 OAL 5 Flute

ISCAR F90LN D2.50-05-1.00-R-N15 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.750 OAL 5 Flute

ANSI: F90LN D2.50-05-1.00-R-N15

ISO: F90LN D2.50-05-1.00-R-N15

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Cross Slide PS14.40 1.574 Steel

INGERSOLL Hole Making Mill Boring Boring Head Cross Slide PS14.40 1.574 Steel

ISO: PS14.40

Call (262) 251-4020 for pricing
Picture of INGERSOLL 22J3X-1002780R01 Milling Cutter 90.0°, Corn Cob 1.000 Cylindrical 1.0000 2 Flute 2.2 Max DOC 5.000 OAL

INGERSOLL 22J3X-1002780R01 Milling Cutter 90.0°, Corn Cob 1.000 Cylindrical 1.0000 2 Flute 2.2 Max DOC 5.000 OAL

ANSI: 22J3X-1002780R01

ISO: 22J3X-1002780R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY DPD24063R Milling Cutter 90.0° 2.480 Cutter Diameter Shell Arbor 0.8661 4 Flute

TUNGALOY DPD24063R Milling Cutter 90.0° 2.480 Cutter Diameter Shell Arbor 0.8661 4 Flute

ANSI: DPD24063R

ISO: DPD24063R

Call (262) 251-4020 for pricing
Picture of INGERSOLL 1A7K-25R01 Milling Cutter Button Cutter 2.500 Shell Arbor 0.7500 5 Flute Coolant 0.315 Max DOC 1.570 OAL

INGERSOLL 1A7K-25R01 Milling Cutter Button Cutter 2.500 Shell Arbor 0.7500 5 Flute Coolant 0.315 Max DOC 1.570 OAL

ANSI: 1A7K-25R01

ISO: 1A7K-25R01

Call (262) 251-4020 for pricing
Picture of TUNGALOY C6TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C6TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C6TDX300L139-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY C4TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C4TDX300L139-3 30mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C4TDX300L139-3

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL 12396440600 90.0° Milling Cutter 0.472 Cutter Diameter Cylindrical 0.472

WIDIA/KENNAMETAL 12396440600 90.0° Milling Cutter 0.472 Cutter Diameter Cylindrical 0.472

ANSI: 12396440600

ISO: 12396440600

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0866-1039-100R-12D 0.866" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0866-1039-100R-12D 0.866" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0866-1039-100R-12D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0827-992-100R-12D 0.827" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0827-992-100R-12D 0.827" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0827-992-100R-12D

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0508152N7R02 2.000 (50.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0508152N7R02 2.000 (50.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0508152N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0500150N7R02 1.969 (50.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0500150N7R02 1.969 (50.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0500150N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0492148N7R02 1.937 (49.20 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0492148N7R02 1.937 (49.20 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0492148N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0476143N7R02 1.875 (47.63 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0476143N7R02 1.875 (47.63 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0476143N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0460138N7R02 1.813 (46.05 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0460138N7R02 1.813 (46.05 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0460138N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0452136N7R02 1.781 (45.24 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0452136N7R02 1.781 (45.24 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0452136N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0500150JHR00 1.969 (50.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0500150JHR00 1.969 (50.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0500150JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0490147JHR00 1.929 (49.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0490147JHR00 1.929 (49.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0490147JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0480144JHR00 1.890 (48.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0480144JHR00 1.890 (48.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0480144JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0470141JHR00 1.850 (47.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0470141JHR00 1.850 (47.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0470141JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0460138JHR00 1.811 (46.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0460138JHR00 1.811 (46.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0460138JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0450135JHR00 1.772 (45.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0450135JHR00 1.772 (45.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0450135JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL DM6Q-04R01 Milling Cutter 70.0° 4.000 Shell Arbor 1.5000 5 Flute Coolant 0.47 Max DOC 2.375 OAL

INGERSOLL DM6Q-04R01 Milling Cutter 70.0° 4.000 Shell Arbor 1.5000 5 Flute Coolant 0.47 Max DOC 2.375 OAL

ANSI: DM6Q-04R01

ISO: DM6Q-04R01

Call (262) 251-4020 for pricing
Picture of LMT FETTE EBG R0250A0250 150NC-70 Milling Ball Mill Milling Cutter 0.250 Cutter Diameter

LMT FETTE EBG R0250A0250 150NC-70 Milling Ball Mill Milling Cutter 0.250 Cutter Diameter

ANSI: EBG R0250A0250 150NC-70

ISO: EBG R0250A0250 150NC-70

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1375-03 1-3/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

TUNGALOY TDSU1375-03 1-3/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Whistle notch

ISO: TDSU1375-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS360F40-3 36mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS360F40-3 36mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS360F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS350F40-3 35mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS350F40-3 35mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS350F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS340F40-3 34mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS340F40-3 34mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS340F40-3

Call (262) 251-4020 for pricing
Picture of ISCAR SOF45 D3.0-06-1.00-R18 Milling Cutter 45.0°, 44.0° 3.000 Diameter Face Mill 1.000 1.940 OAL 6 Flute

ISCAR SOF45 D3.0-06-1.00-R18 Milling Cutter 45.0°, 44.0° 3.000 Diameter Face Mill 1.000 1.940 OAL 6 Flute

ANSI: SOF45 D3.0-06-1.00-R18

ISO: SOF45 D3.0-06-1.00-R18

Call (262) 251-4020 for pricing
Picture of ISCAR MM S-A-L7.00-C.625-T10-C SH 0.6250 OAL 7.00 Replacable Head Acc. Stepped Shank Carbide Single End MULTI-MASTER

ISCAR MM S-A-L7.00-C.625-T10-C SH 0.6250 OAL 7.00 Replacable Head Acc. Stepped Shank Carbide Single End MULTI-MASTER

Call (262) 251-4020 for pricing
Picture of ISCAR HM90 F90AP D2.50-9-1.00 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.750 OAL 9 Flute

ISCAR HM90 F90AP D2.50-9-1.00 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.750 OAL 9 Flute

ANSI: HM90 F90AP D2.50-9-1.00

ISO: HM90 F90AP D2.50-9-1.00

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Boring Bar Boring Bar 0.629 Carbide

INGERSOLL Hole Making Mill Boring Boring Head Boring Bar Boring Bar 0.629 Carbide

ISO: B8.10

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M1200HD100Z09HN07 60.0° Milling Cutter 4.202 Cutter Diameter Face Mill 1.259

WIDIA/KENNAMETAL M1200HD100Z09HN07 60.0° Milling Cutter 4.202 Cutter Diameter Face Mill 1.259

ANSI: M1200HD100Z09HN07

ISO: M1200HD100Z09HN07

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M1200HD500Z08S150HN07 30.0° Milling Cutter 5.265 Cutter Diameter Face Mill 1.500

WIDIA/KENNAMETAL M1200HD500Z08S150HN07 30.0° Milling Cutter 5.265 Cutter Diameter Face Mill 1.500

ANSI: M1200HD500Z08S150HN07

ISO: M1200HD500Z08S150HN07

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M1200D100Z09HN07 45.0° Milling Cutter 0.984 Cutter Diameter Face Mill 1.259

WIDIA/KENNAMETAL M1200D100Z09HN07 45.0° Milling Cutter 0.984 Cutter Diameter Face Mill 1.259

ANSI: M1200D100Z09HN07

ISO: M1200D100Z09HN07

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M1200D400Z09S150HN07 45.0° Milling Cutter 4.342 Cutter Diameter Face Mill 1.500

WIDIA/KENNAMETAL M1200D400Z09S150HN07 45.0° Milling Cutter 4.342 Cutter Diameter Face Mill 1.500

ANSI: M1200D400Z09S150HN07

ISO: M1200D400Z09S150HN07

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1437FS-03 1.437" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1437FS-03 1.437" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1437FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1375FS-03 1-3/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1375FS-03 1-3/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1375FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX360F40-3 36mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX360F40-3 36mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX360F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX350F40-3 35mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX350F40-3 35mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX350F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX340F40-3 34mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX340F40-3 34mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX340F40-3

Call (262) 251-4020 for pricing
Picture of INGERSOLL 1A7H-25R01 Milling Cutter Button Cutter 2.500 Shell Arbor 0.7500 5 Flute Coolant 0.2362 Max DOC 1.570 OAL

INGERSOLL 1A7H-25R01 Milling Cutter Button Cutter 2.500 Shell Arbor 0.7500 5 Flute Coolant 0.2362 Max DOC 1.570 OAL

ANSI: 1A7H-25R01

ISO: 1A7H-25R01

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1142R8SL125 TDMX Drill BODY D1.142 8XD SL

WIDIA/KENNAMETAL TDMX1142R8SL125 TDMX Drill BODY D1.142 8XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1103R8SL125 TDMX Drill BODY D1.103 8XD SL

WIDIA/KENNAMETAL TDMX1103R8SL125 TDMX Drill BODY D1.103 8XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX290R8SL32M TDMX Drill BODY D=29MM 8XD SL

WIDIA/KENNAMETAL TDMX290R8SL32M TDMX Drill BODY D=29MM 8XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX280R8SL32M TDMX Drill BODY D=28MM 8XD SL

WIDIA/KENNAMETAL TDMX280R8SL32M TDMX Drill BODY D=28MM 8XD SL

Call (262) 251-4020 for pricing
Picture of ISCAR MD-DFN 1535 HEAD 1.535" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISCAR MD-DFN 1535 HEAD 1.535" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISO: MD-DFN 1535 HEAD

Call (262) 251-4020 for pricing
Picture of ISCAR F45E D 3.0 -1.00 Milling Cutter 45.0° 3.000 Diameter Face Mill 1.000 1.750 OAL 6 Flute

ISCAR F45E D 3.0 -1.00 Milling Cutter 45.0° 3.000 Diameter Face Mill 1.000 1.750 OAL 6 Flute

ANSI: F45E D 3.0 -1.00

ISO: F45E D 3.0 -1.00

Call (262) 251-4020 for pricing
Picture of CARMEX SIL 0625 R16CB Threading Boring Bar Iso Thread 0.62 Shank Left Hand 8.00 OAL Coolant

CARMEX SIL 0625 R16CB Threading Boring Bar Iso Thread 0.62 Shank Left Hand 8.00 OAL Coolant

ANSI: SIL 0625 R16CB

ISO: SIL 0625 R16CB

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0945R12SF125 TDMX BODY D.945 12XD SF Shank

WIDIA/KENNAMETAL TDMX0945R12SF125 TDMX BODY D.945 12XD SF Shank

Call (262) 251-4020 for pricing
Picture of TUNGALOY TRD6004R Milling Cutter Button Cutter 3.150 Cutter Diameter Shell Arbor 1.2500 5 Flute

TUNGALOY TRD6004R Milling Cutter Button Cutter 3.150 Cutter Diameter Shell Arbor 1.2500 5 Flute

ANSI: TRD6004R

ISO: TRD6004R

Call (262) 251-4020 for pricing
Picture of ISCAR V85 MAHDL-L-XL-LH-JHP Cut Off,Grooving,Groove Turning Blade Holder 3.346 Tool

ISCAR V85 MAHDL-L-XL-LH-JHP Cut Off,Grooving,Groove Turning Blade Holder 3.346 Tool

ISO: V85 MAHDL-L-XL-LH-JHP

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0365146N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0365146N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0365146N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0357143N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0357143N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0357143N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0349140N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0349140N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0349140N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0341136N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0341136N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0341136N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0360144JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0360144JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0360144JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0350140JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0350140JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0350140JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0340136JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0340136JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0340136JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL S062T05CA-52 SH 0.6250 OAL 5.2500 Replacable Head Acc. Straight Shank/Taper Neck Carbide Single End CHIPSURFER

INGERSOLL S062T05CA-52 SH 0.6250 OAL 5.2500 Replacable Head Acc. Straight Shank/Taper Neck Carbide Single End CHIPSURFER

Call (262) 251-4020 for pricing
Picture of INGERSOLL 2J1R066R00 Milling Cutter 90.0° 2.598 Shell Arbor 0.6300 6 Flute Coolant 0.4724 Max DOC 1.968 OAL

INGERSOLL 2J1R066R00 Milling Cutter 90.0° 2.598 Shell Arbor 0.6300 6 Flute Coolant 0.4724 Max DOC 1.968 OAL

ANSI: 2J1R066R00

ISO: 2J1R066R00

Call (262) 251-4020 for pricing
Picture of INGERSOLL 2J1R063R01 Milling Cutter 90.0° 2.480 Shell Arbor 0.8661 6 Flute Coolant 0.4724 Max DOC 1.574 OAL

INGERSOLL 2J1R063R01 Milling Cutter 90.0° 2.480 Shell Arbor 0.8661 6 Flute Coolant 0.4724 Max DOC 1.574 OAL

ANSI: 2J1R063R01

ISO: 2J1R063R01

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1024-820-125R-8D 1.024" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 1024-820-125R-8D 1.024" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 1024-820-125R-8D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0984-787-125R-8D 0.984" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0984-787-125R-8D 0.984" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0984-787-125R-8D

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0405122N6R01 1.594 (40.49 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0405122N6R01 1.594 (40.49 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0405122N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0397119N6R01 1.562 (39.67 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0397119N6R01 1.562 (39.67 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0397119N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0389117N6R01 1.531 (38.89 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0389117N6R01 1.531 (38.89 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0389117N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0381114N6R01 1.500 (38.10 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0381114N6R01 1.500 (38.10 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0381114N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0373112N6R01 1.468 (37.29 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0373112N6R01 1.468 (37.29 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0373112N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL EF6J-03R01 Milling Cutter 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.04 Max DOC 2.165 OAL

INGERSOLL EF6J-03R01 Milling Cutter 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.04 Max DOC 2.165 OAL

ANSI: EF6J-03R01

ISO: EF6J-03R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL KJ6G-30R01 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.41 Max DOC 1.750 OAL

INGERSOLL KJ6G-30R01 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.41 Max DOC 1.750 OAL

ANSI: KJ6G-30R01

ISO: KJ6G-30R01

Call (262) 251-4020 for pricing
Picture of EVEREDE Tool CD4115L Triangle Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

EVEREDE Tool CD4115L Triangle Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

ANSI: CD4115L

ISO: CD4115L

Call (262) 251-4020 for pricing
Picture of EVEREDE Tool CD4115 Triangle Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

EVEREDE Tool CD4115 Triangle Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

ANSI: CD4115

ISO: CD4115

Call (262) 251-4020 for pricing
Picture of EVEREDE Tool CD4110L Triangle Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

EVEREDE Tool CD4110L Triangle Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

ANSI: CD4110L

ISO: CD4110L

Call (262) 251-4020 for pricing
Picture of EVEREDE Tool CD4110 Triangle Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

EVEREDE Tool CD4110 Triangle Boring Bar Dia1.0000 Positive 1.0000 25.40MM Cutter Dia

ANSI: CD4110

ISO: CD4110

Call (262) 251-4020 for pricing
Picture of INGERSOLL ON6H-30R01 Milling Cutter 45.0° 3.000 Shell Arbor 1.0000 7 Flute Coolant 0.12 Max DOC 1.750 OAL

INGERSOLL ON6H-30R01 Milling Cutter 45.0° 3.000 Shell Arbor 1.0000 7 Flute Coolant 0.12 Max DOC 1.750 OAL

ANSI: ON6H-30R01

ISO: ON6H-30R01

Call (262) 251-4020 for pricing
Picture of ZCC FMP01-10.00″-C2.50″-TP22-16 90.0° Milling Cutter 10.00 Cutter Diameter Face Mill 2.500

ZCC FMP01-10.00″-C2.50″-TP22-16 90.0° Milling Cutter 10.00 Cutter Diameter Face Mill 2.500

ANSI: FMP01-10.00″-C2.50″-TP22-16

ISO: FMP01-10.00″-C2.50″-TP22-16

Call (262) 251-4020 for pricing
Picture of TUNGALOY EAW13R080M32.0-04 Milling Cutter 45.0° 3.150 Cutter Diameter Cylindrical Shank1.2598 4.724 OAL 4 Flute

TUNGALOY EAW13R080M32.0-04 Milling Cutter 45.0° 3.150 Cutter Diameter Cylindrical Shank1.2598 4.724 OAL 4 Flute

ANSI: EAW13R080M32.0-04

ISO: EAW13R080M32.0-04

Call (262) 251-4020 for pricing
Picture of ISCAR DFN 1496-748-125A-5D-IQ 1.496" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DFN 1496-748-125A-5D-IQ 1.496" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DFN 1496-748-125A-5D-IQ

Call (262) 251-4020 for pricing
Picture of ISCAR DFN 1457-728-125A-5D-IQ 1.457" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DFN 1457-728-125A-5D-IQ 1.457" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DFN 1457-728-125A-5D-IQ

Call (262) 251-4020 for pricing
Picture of ISCAR DFN 1417-708-125A-5D-IQ 1.417" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DFN 1417-708-125A-5D-IQ 1.417" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DFN 1417-708-125A-5D-IQ

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M270TD075C075L700C Milling Ball Mill Milling Cutter

WIDIA/KENNAMETAL M270TD075C075L700C Milling Ball Mill Milling Cutter

ANSI: M270TD075C075L700C

ISO: M270TD075C075L700C

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M270BD075C075L700C Milling Ball Mill Milling Cutter

WIDIA/KENNAMETAL M270BD075C075L700C Milling Ball Mill Milling Cutter

ANSI: M270BD075C075L700C

ISO: M270BD075C075L700C

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL M270BF0750 Milling Ball Mill Milling Cutter TiAlN 0.375 Corner Radius

WIDIA/KENNAMETAL M270BF0750 Milling Ball Mill Milling Cutter TiAlN 0.375 Corner Radius

ANSI: M270BF0750

ISO: M270BF0750 TN2505

Call (262) 251-4020 for pricing
Picture of INGERSOLL KJ6P063R00 Milling Cutter 90.0° 2.480 Shell Arbor 0.8661 4 Flute Coolant 0.5906 Max DOC 1.574 OAL

INGERSOLL KJ6P063R00 Milling Cutter 90.0° 2.480 Shell Arbor 0.8661 4 Flute Coolant 0.5906 Max DOC 1.574 OAL

ANSI: KJ6P063R00

ISO: KJ6P063R00

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE PSC40-2-3RA-R Quick Change Clamp Down Right Hand

ARNO ROUSE PSC40-2-3RA-R Quick Change Clamp Down Right Hand

ANSI: PSC40-2-3RA-R

ISO: PSC40-2-3RA-R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE PSC40-2-3RA-L Quick Change Clamp Down Left Hand

ARNO ROUSE PSC40-2-3RA-L Quick Change Clamp Down Left Hand

ANSI: PSC40-2-3RA-L

ISO: PSC40-2-3RA-L

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE PSC40-2-3R Quick Change Clamp Down Right Hand

ARNO ROUSE PSC40-2-3R Quick Change Clamp Down Right Hand

ANSI: PSC40-2-3R

ISO: PSC40-2-3R

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE PSC40-2-3L Quick Change Clamp Down Left Hand

ARNO ROUSE PSC40-2-3L Quick Change Clamp Down Left Hand

ANSI: PSC40-2-3L

ISO: PSC40-2-3L

Call (262) 251-4020 for pricing
Picture of ISCAR T490 FLN D44-06-C4-08 Milling Cutter 90.0°, Corn Cob 1.732 Diameter PSC "Capto Type" 1.574 1.772 OAL 6 Flute

ISCAR T490 FLN D44-06-C4-08 Milling Cutter 90.0°, Corn Cob 1.732 Diameter PSC "Capto Type" 1.574 1.772 OAL 6 Flute

ANSI: T490 FLN D44-06-C4-08

ISO: T490 FLN D44-06-C4-08

Call (262) 251-4020 for pricing
Picture of ISCAR HM390 FTP D2.50-7-1.0-10 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.770 OAL 7 Flute

ISCAR HM390 FTP D2.50-7-1.0-10 Milling Cutter 90.0° 2.500 Diameter Face Mill 1.000 1.770 OAL 7 Flute

ANSI: HM390 FTP D2.50-7-1.0-10

ISO: HM390 FTP D2.50-7-1.0-10

Call (262) 251-4020 for pricing
Picture of INGERSOLL AX2K-30R02 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.63 Max DOC 2.000 OAL

INGERSOLL AX2K-30R02 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.63 Max DOC 2.000 OAL

ANSI: AX2K-30R02

ISO: AX2K-30R02

Call (262) 251-4020 for pricing
Picture of TUNGALOY ERC16R050M42.0-03L Milling Cutter Button Cutter 1.967 Cutter Diameter Cylindrical Shank1.6535 9.842 OAL 3 Flute

TUNGALOY ERC16R050M42.0-03L Milling Cutter Button Cutter 1.967 Cutter Diameter Cylindrical Shank1.6535 9.842 OAL 3 Flute

ANSI: ERC16R050M42.0-03L

ISO: ERC16R050M42.0-03L

Call (262) 251-4020 for pricing
Picture of INGERSOLL AX2Q-30R02 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.83 Max DOC 2.000 OAL

INGERSOLL AX2Q-30R02 Milling Cutter 90.0° 3.000 Shell Arbor 1.0000 5 Flute Coolant 0.83 Max DOC 2.000 OAL

ANSI: AX2Q-30R02

ISO: AX2Q-30R02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1562-02 1.562" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1562-02 1.562" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1562-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1500-02 1-1/2" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1500-02 1-1/2" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1500-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1437-02 1.437" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1437-02 1.437" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1437-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS400F40-2 40mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS400F40-2 40mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS400F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS390F40-2 39mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS390F40-2 39mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS390F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS380F40-2 38mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS380F40-2 38mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS380F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS370F40-2 37mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS370F40-2 37mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS370F40-2

Call (262) 251-4020 for pricing
Picture of DORIAN E25M-R-ADWLNL-08 Boring Bar Trigon Carbide Round With One Flat 0.984 Shank 8.000 OAL

DORIAN E25M-R-ADWLNL-08 Boring Bar Trigon Carbide Round With One Flat 0.984 Shank 8.000 OAL

ANSI: E25M-R-ADWLNL-08

ISO: E25M-R-ADWLNL-08

Call (262) 251-4020 for pricing
Picture of DORIAN E25M-R-ADWLNR-08 Boring Bar Trigon Carbide Round With One Flat 0.984 Shank 8.000 OAL

DORIAN E25M-R-ADWLNR-08 Boring Bar Trigon Carbide Round With One Flat 0.984 Shank 8.000 OAL

ANSI: E25M-R-ADWLNR-08

ISO: E25M-R-ADWLNR-08

Call (262) 251-4020 for pricing
Picture of DORIAN E16R-ADWLNL-4 Boring Bar Trigon Carbide Round With One Flat 1.000 Shank 8.000 OAL

DORIAN E16R-ADWLNL-4 Boring Bar Trigon Carbide Round With One Flat 1.000 Shank 8.000 OAL

ANSI: E16R-ADWLNL-4

ISO: E16R-ADWLNL-4

Call (262) 251-4020 for pricing
Picture of DORIAN E16R-ADWLNR-4 Boring Bar Trigon Carbide Round With One Flat 1.000 Shank 8.000 OAL

DORIAN E16R-ADWLNR-4 Boring Bar Trigon Carbide Round With One Flat 1.000 Shank 8.000 OAL

ANSI: E16R-ADWLNR-4

ISO: E16R-ADWLNR-4

Call (262) 251-4020 for pricing
Picture of DORIAN E25M-R-ADDPNL-11 Boring Bar 55.0° Carbide Round With One Flat 0.984 Shank 8.000 OAL

DORIAN E25M-R-ADDPNL-11 Boring Bar 55.0° Carbide Round With One Flat 0.984 Shank 8.000 OAL

ANSI: E25M-R-ADDPNL-11

ISO: E25M-R-ADDPNL-11

Call (262) 251-4020 for pricing
Picture of DORIAN E25M-R-ADDPNR-11 Boring Bar 55.0° Carbide Round With One Flat 0.984 Shank 8.000 OAL

DORIAN E25M-R-ADDPNR-11 Boring Bar 55.0° Carbide Round With One Flat 0.984 Shank 8.000 OAL

ANSI: E25M-R-ADDPNR-11

ISO: E25M-R-ADDPNR-11

Call (262) 251-4020 for pricing
Picture of DORIAN E16R-ADDPNL-3 Boring Bar 55.0° Carbide Round With One Flat 1.000 Shank 8.000 OAL

DORIAN E16R-ADDPNL-3 Boring Bar 55.0° Carbide Round With One Flat 1.000 Shank 8.000 OAL

ANSI: E16R-ADDPNL-3

ISO: E16R-ADDPNL-3

Call (262) 251-4020 for pricing