Medical

Sort by
Picture of MELIN 16547 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 16547 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 41981 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0079 0.20MM

MELIN 41981 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0079 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 44449 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1250 3.18MM

MELIN 44449 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of MELIN H7022 DIA 1MM SH 0.1575 LOC 0.0315 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0079 0.20MM

MELIN H7022 DIA 1MM SH 0.1575 LOC 0.0315 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0079 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 43414 DIA 14MM SH 0.5512 LOC 1.0236 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43414 DIA 14MM SH 0.5512 LOC 1.0236 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 13718 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Cobalt Uncoated Single End 45.0° Chamfer

MELIN 13718 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Cobalt Uncoated Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 340650 DIA 1/8 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN 340650 DIA 1/8 SH 0.1250 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 42227 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 42227 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 16888 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 16888 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42166 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 42166 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44476 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 44476 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN H7054 DIA 0.60MM SH 0.1575 LOC 0.0157 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7054 DIA 0.60MM SH 0.1575 LOC 0.0157 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 43624 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 43624 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14133 DIA 25MM SH 0.9843 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 14133 DIA 25MM SH 0.9843 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 341210 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 341210 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 42229 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42229 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-8-32-S 8-32 Multi Fl Carbide 60° UN Thread

MELIN TM-8-32-S 8-32 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 42211 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 42211 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44477 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1250 3.18MM

MELIN 44477 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of MELIN H7122 DIA 0.047 SH 0.2500 LOC 0.0380 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0080 0.20MM

MELIN H7122 DIA 0.047 SH 0.2500 LOC 0.0380 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0080 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 44127 DIA 25MM SH 0.9843 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44127 DIA 25MM SH 0.9843 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 14135 DIA 25MM SH 0.9843 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14135 DIA 25MM SH 0.9843 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 341332 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0150 0.38MM

MELIN 341332 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 42422 DIA 3/16 SH 0.1875 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 42422 DIA 3/16 SH 0.1875 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-3/4-12-S 3/4-12 Multi Fl Carbide 60° UN Thread

MELIN TM-3/4-12-S 3/4-12 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 42421 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 42421 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 44494 DIA 5/8 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 44494 DIA 5/8 SH 0.6250 LOC 2.50 OAL 4.6250 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN H7138 DIA 1/4 SH 0.2500 LOC 0.20 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN H7138 DIA 1/4 SH 0.2500 LOC 0.20 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 44155 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44155 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14326 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

MELIN 14326 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 341540 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 341540 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 42463 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42463 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-10-28-H 10-28 Multi Fl Carbide 60° Fl, UN Thread

MELIN TM-10-28-H 10-28 Multi Fl Carbide 60° Fl, UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 42525 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42525 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44589 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44589 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN H7139 DIA 0.60MM SH 0.1575 LOC 0.0157 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0039 0.10MM

MELIN H7139 DIA 0.60MM SH 0.1575 LOC 0.0157 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0039 0.10MM

Call (262) 251-4020 for pricing
Picture of MELIN 44167 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44167 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14333 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14333 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 341920 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 341920 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 42477 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42477 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 60668 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60668 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 42554 DIA 3/16 SH 0.1875 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42554 DIA 3/16 SH 0.1875 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44619 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

MELIN 44619 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN H7157 DIA 2.50MM SH 0.1575 LOC 0.0787 OAL 2.480 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0197 0.50MM

MELIN H7157 DIA 2.50MM SH 0.1575 LOC 0.0787 OAL 2.480 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44219 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44219 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14356 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14356 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 341960 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 341960 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42518 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42518 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 60674 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60674 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 43305 DIA 3MM SH 0.1181 LOC 0.3150 OAL 2.0079 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0039 0.10MM

MELIN 43305 DIA 3MM SH 0.1181 LOC 0.3150 OAL 2.0079 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0039 0.10MM

Call (262) 251-4020 for pricing
Picture of MELIN 44692 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

MELIN 44692 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H7172 DIA 5MM SH 0.2362 LOC 0.1575 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7172 DIA 5MM SH 0.2362 LOC 0.1575 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44335 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44335 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14358 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

MELIN 14358 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 342100 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 342100 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42528 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42528 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 60837 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 60837 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 43346 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.5039 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 43346 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.5039 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44804 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 44804 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN H7173 DIA 5MM SH 0.2362 LOC 0.1575 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7173 DIA 5MM SH 0.2362 LOC 0.1575 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44337 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44337 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14365 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14365 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 342630 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 342630 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 42553 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42553 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 60843 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 60843 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 43347 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 43347 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44809 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44809 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H7188 DIA 0.031 SH 0.2500 LOC 0.0250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7188 DIA 0.031 SH 0.2500 LOC 0.0250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44364 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 44364 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 14374 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14374 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 342680 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 342680 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42558 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 42558 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 61463 DIA 10MM SH 0.3937 LOC 0.9843 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0051 0.13MM

MELIN 61463 DIA 10MM SH 0.3937 LOC 0.9843 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 43360 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43360 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44829 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 44829 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H7189 DIA 0.047 SH 0.2500 LOC 0.0380 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7189 DIA 0.047 SH 0.2500 LOC 0.0380 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44431 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44431 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 14392 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14392 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 342900 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

MELIN 342900 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 42562 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 42562 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 61465 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0051 0.13MM

MELIN 61465 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 43627 DIA 18MM SH 0.7087 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 43627 DIA 18MM SH 0.7087 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44879 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44879 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN H7190 DIA 0.062 SH 0.2500 LOC 0.0500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7190 DIA 0.062 SH 0.2500 LOC 0.0500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44482 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0400 1.02MM

MELIN 44482 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0400 1.02MM

Call (262) 251-4020 for pricing
Picture of MELIN 14401 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

MELIN 14401 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 34333 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34333 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 42571 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 42571 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 61469 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.5039 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0051 0.13MM

MELIN 61469 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.5039 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 43629 DIA 18MM SH 0.7087 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43629 DIA 18MM SH 0.7087 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45026 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45026 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN H7239 DIA 0.80MM SH 0.1575 LOC 0.0197 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7239 DIA 0.80MM SH 0.1575 LOC 0.0197 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44489 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 44489 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 14408 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

MELIN 14408 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 34341 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34341 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 42733 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42733 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 61890 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 61890 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 43630 DIA 18MM SH 0.7087 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 43630 DIA 18MM SH 0.7087 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 45027 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45027 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN H7255 DIA 0.80MM SH 0.1575 LOC 0.0197 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0039 0.10MM

MELIN H7255 DIA 0.80MM SH 0.1575 LOC 0.0197 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0039 0.10MM

Call (262) 251-4020 for pricing
Picture of MELIN 44578 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 44578 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 14433 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 14433 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 34350 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34350 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 43310 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.7559 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 43310 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.7559 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 62213 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 62213 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44117 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44117 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45028 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 45028 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN H7256 DIA 0.80MM SH 0.1575 LOC 0.0197 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0039 0.10MM

MELIN H7256 DIA 0.80MM SH 0.1575 LOC 0.0197 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0039 0.10MM

Call (262) 251-4020 for pricing
Picture of MELIN 44593 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44593 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14495 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0400 1.02MM

MELIN 14495 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0400 1.02MM

Call (262) 251-4020 for pricing
Picture of MELIN 34352 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34352 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 43318 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43318 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 62215 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

MELIN 62215 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44119 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 44119 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 45045 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

MELIN 45045 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H7273 DIA 3/16 SH 0.2500 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7273 DIA 3/16 SH 0.2500 LOC 0.1500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44608 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

MELIN 44608 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14580 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

MELIN 14580 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 34358 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34358 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 43320 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

MELIN 43320 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 62218 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 62218 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44169 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44169 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45059 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45059 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN H7275 DIA 1/4 SH 0.2500 LOC 0.20 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7275 DIA 1/4 SH 0.2500 LOC 0.20 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44691 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44691 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 14582 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14582 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 34361 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34361 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 43329 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43329 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 62477 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 62477 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 44173 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44173 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45093 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 45093 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 62475 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 62475 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 44698 DIA 20MM SH 0.7874 LOC 0.9449 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

MELIN 44698 DIA 20MM SH 0.7874 LOC 0.9449 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14599 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14599 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 34434 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 34434 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 43336 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.5039 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 43336 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.5039 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 62496 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 62496 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44338 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 44338 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 45095 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45095 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 62527 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 62527 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44800 DIA 3MM SH 0.2362 LOC 0.4724 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 44800 DIA 3MM SH 0.2362 LOC 0.4724 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14613 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14613 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 34585 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34585 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 43671 DIA 18MM SH 0.7087 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43671 DIA 18MM SH 0.7087 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 62531 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 62531 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44339 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44339 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45211 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 45211 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 62528 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 62528 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44811 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 44811 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14617 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 14617 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 34653 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34653 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 43699 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 43699 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 62562 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

MELIN 62562 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 44344 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44344 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45225 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45225 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 62529 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 62529 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44822 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44822 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14622 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 14622 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 34661 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34661 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44111 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 44111 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 62569 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

MELIN 62569 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 44379 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44379 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45275 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45275 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 62563 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

MELIN 62563 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 44824 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 44824 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14633 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 14633 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 35187 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 35187 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44131 DIA 25MM SH 0.9843 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 44131 DIA 25MM SH 0.9843 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 62785 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 62785 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 44380 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44380 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 45327 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 45327 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 62880 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

MELIN 62880 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44833 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44833 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14661 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14661 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 361180 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 361180 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44223 DIA 1/2 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44223 DIA 1/2 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 62788 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 62788 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 44381 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44381 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45329 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45329 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 62882 DIA 3/4 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

MELIN 62882 DIA 3/4 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44856 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44856 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 14697 DIA 20MM SH 0.7874 LOC 0.9449 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14697 DIA 20MM SH 0.7874 LOC 0.9449 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 361280 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 361280 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 44354 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44354 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 63312 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.7559 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 63312 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.7559 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44386 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44386 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45331 DIA 7/32 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45331 DIA 7/32 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 62884 DIA 1 SH 1.00 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

MELIN 62884 DIA 1 SH 1.00 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44861 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44861 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14823 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14823 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 361320 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 361320 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44397 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44397 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 63329 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 63329 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44475 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 44475 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 45359 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45359 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 63330 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

MELIN 63330 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44871 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44871 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 13315 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 13315 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 361640 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 361640 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44429 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 44429 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing