Medical

Sort by
Picture of MELIN 15018 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 15018 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 341890 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 341890 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 41700 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 41700 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 17668 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM - 0.0350 0.89MM

MELIN 17668 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM - 0.0350 0.89MM

Call (262) 251-4020 for pricing
Picture of MELIN 34402 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 34402 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 45031 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45031 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 14672 DIA 12MM SH 0.4724 LOC 0.5510 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14672 DIA 12MM SH 0.4724 LOC 0.5510 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 341550 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 341550 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 15032 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 15032 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 34342 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34342 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 41982 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0079 0.20MM

MELIN 41982 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0079 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 17703 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

MELIN 17703 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 34405 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34405 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 45038 DIA 16MM SH 0.6299 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 45038 DIA 16MM SH 0.6299 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 14674 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14674 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 341940 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 341940 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 15034 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 15034 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 34366 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34366 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 42209 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 42209 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 69292 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 69292 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 34426 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34426 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 45063 DIA 3/16 SH 0.1875 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45063 DIA 3/16 SH 0.1875 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 14690 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 14690 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 342120 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 342120 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15049 DIA 1/8 SH 0.1250 LOC 0.1875 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 15049 DIA 1/8 SH 0.1250 LOC 0.1875 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 34396 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34396 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 42210 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 42210 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 69296 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 69296 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 34584 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34584 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45207 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45207 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14799 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 14799 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 342950 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 342950 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 15081 DIA 5/16 SH 0.3125 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 15081 DIA 5/16 SH 0.3125 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 34398 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34398 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 42212 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 42212 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 69323 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 69323 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 34586 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34586 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 45221 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 45221 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14810 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14810 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 34332 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34332 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15099 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 15099 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 34399 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34399 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 42234 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42234 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 69324 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 69324 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 34610 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 34610 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 45237 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45237 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14834 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14834 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 34351 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34351 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15203 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 15203 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 34400 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34400 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 42237 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 42237 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 69391 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 69391 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 34639 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34639 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45287 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45287 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-016 .240x5/8x1/4x2-1/2 ThreadMills

MASTERCUT 290-016 .240x5/8x1/4x2-1/2 ThreadMills

Call (262) 251-4020 for pricing
Picture of MELIN 34394 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34394 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 15219 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 15219 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 34439 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34439 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 42467 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 42467 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 69738 DIA 1 SH 1.00 LOC 1.50 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 69738 DIA 1 SH 1.00 LOC 1.50 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 34654 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34654 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45297 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45297 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-046 .620x1-1/4x5/8x3-1/2 ThreadMills

MASTERCUT 290-046 .620x1-1/4x5/8x3-1/2 ThreadMills

Call (262) 251-4020 for pricing
Picture of MELIN 34424 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34424 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15271 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM

MELIN 15271 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 34440 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34440 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 42473 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 42473 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 69782 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 69782 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 361120 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 361120 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45309 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45309 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 11455 DIA 4MM SH 0.1575 LOC 0.5510 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0051 0.13MM

MELIN 11455 DIA 4MM SH 0.1575 LOC 0.5510 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 34613 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34613 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15287 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

MELIN 15287 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 34642 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34642 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 42521 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42521 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 69991 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 69991 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 361300 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 361300 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45335 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45335 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 11471 DIA 18MM SH 0.7087 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0051 0.13MM

MELIN 11471 DIA 18MM SH 0.7087 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 361330 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 361330 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 15289 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM

MELIN 15289 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 34645 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34645 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 42522 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42522 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 74148 DIA 9/32 SH 0.3125 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

MELIN 74148 DIA 9/32 SH 0.3125 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 361890 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 361890 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 45339 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45339 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 11648 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 11648 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 361480 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 361480 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 15329 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15329 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 361040 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 361040 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42527 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42527 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 77646 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

MELIN 77646 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 362400 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 362400 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 45443 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45443 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 11889 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 11889 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 361620 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 361620 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15365 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15365 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 361060 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 361060 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 42555 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42555 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 77648 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

MELIN 77648 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 362840 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 362840 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45453 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45453 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 11987 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 11987 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 361940 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 361940 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 15401 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15401 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 361090 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 361090 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 42557 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 42557 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 79587 DIA 9/32 SH 0.3125 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

MELIN 79587 DIA 9/32 SH 0.3125 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 363180 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 363180 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45457 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45457 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 12162 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 12162 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 362080 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 362080 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 15421 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 15421 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 361334 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0300 0.76MM

MELIN 361334 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42662 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42662 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN H6697 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

MELIN H6697 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 363430 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 363430 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 45477 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45477 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 12190 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 12190 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 362120 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 362120 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15473 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 15473 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 361336 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 361336 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 43306 DIA 4MM SH 0.1575 LOC 0.4331 OAL 2.4803 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43306 DIA 4MM SH 0.1575 LOC 0.4331 OAL 2.4803 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN H6699 DIA 3MM SH 0.1181 LOC 0.4724 OAL 1.4961 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

MELIN H6699 DIA 3MM SH 0.1181 LOC 0.4724 OAL 1.4961 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 363980 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 363980 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45489 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45489 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 12205 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 12205 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 363220 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

MELIN 363220 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 15493 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 15493 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 361820 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 361820 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 43322 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43322 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN H6714 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0079 0.20MM

MELIN H6714 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0079 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 364270 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 364270 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 45497 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45497 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 12209 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 12209 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 363480 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 363480 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 15565 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 15565 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 362140 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 362140 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 43323 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9921 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 43323 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9921 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN H6752 DIA 0.031 SH 0.2500 LOC 0.0250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6752 DIA 0.031 SH 0.2500 LOC 0.0250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 40811 DIA 1/2 SH 0.50 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 40811 DIA 1/2 SH 0.50 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 45501 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45501 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 12368 DIA 20MM SH 0.7874 LOC 2.1654 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

MELIN 12368 DIA 20MM SH 0.7874 LOC 2.1654 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 364020 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

MELIN 364020 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 15615 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 15615 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 362160 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

MELIN 362160 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 43325 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9921 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 43325 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9921 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN H6785 DIA 3MM SH 0.2500 LOC 0.0940 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6785 DIA 3MM SH 0.2500 LOC 0.0940 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 41451 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0276 0.70MM

MELIN 41451 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0276 0.70MM

Call (262) 251-4020 for pricing
Picture of MELIN 45543 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45543 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 12496 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 12496 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 364180 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 364180 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15629 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 15629 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 362340 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 362340 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 44115 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44115 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.9055 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H6786 DIA 1/8 SH 0.2500 LOC 0.10 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6786 DIA 1/8 SH 0.2500 LOC 0.10 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 41463 DIA 10MM SH 0.3937 LOC 0.9843 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0051 0.13MM

MELIN 41463 DIA 10MM SH 0.3937 LOC 0.9843 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 45553 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 45553 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 12529 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 12529 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 40837 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 40837 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 15649 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 15649 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 362720 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 362720 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44123 DIA 25MM SH 0.9843 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 44123 DIA 25MM SH 0.9843 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN H6821 DIA 8MM SH 0.3150 LOC 0.9843 OAL 2.9528 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

MELIN H6821 DIA 8MM SH 0.3150 LOC 0.9843 OAL 2.9528 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 41988 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

MELIN 41988 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45639 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45639 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 19161 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 19161 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 41435 DIA 6MM SH 0.2362 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0118 0.30MM

MELIN 41435 DIA 6MM SH 0.2362 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0118 0.30MM

Call (262) 251-4020 for pricing
Picture of MELIN 15670 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 15670 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 363340 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 363340 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44171 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44171 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H6846 DIA 1/64 SH 0.1250 LOC 0.0120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H6846 DIA 1/64 SH 0.1250 LOC 0.0120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 42206 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 42206 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 47739 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 47739 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 19328 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 19328 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 41445 DIA 14MM SH 0.5512 LOC 1.2598 OAL 3.5039 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

MELIN 41445 DIA 14MM SH 0.5512 LOC 1.2598 OAL 3.5039 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 15810 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 15810 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 363360 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 363360 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44349 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44349 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN H7005 DIA 2MM SH 0.1575 LOC 0.0669 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7005 DIA 2MM SH 0.1575 LOC 0.0669 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 42502 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 42502 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 47743 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 47743 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 19340 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 19340 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 41887 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 41887 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15828 0.098 DIA Single Point 60deg 2 Over All

MELIN 15828 0.098 DIA Single Point 60deg 2 Over All

Call (262) 251-4020 for pricing
Picture of MELIN 364090 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 364090 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44427 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44427 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN H7006 DIA 2.50MM SH 0.1575 LOC 0.0787 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7006 DIA 2.50MM SH 0.1575 LOC 0.0787 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 42768 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42768 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 13612 DIA 1/32 SH 0.1250 LOC 0.0938 OAL 1.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

MELIN 13612 DIA 1/32 SH 0.1250 LOC 0.0938 OAL 1.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 19532 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM

MELIN 19532 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 42174 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 42174 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 16544 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 16544 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 365010 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 365010 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44428 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44428 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN H7007 DIA 2.50MM SH 0.1575 LOC 0.0787 OAL 2.480 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7007 DIA 2.50MM SH 0.1575 LOC 0.0787 OAL 2.480 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 43403 DIA 14MM SH 0.5512 LOC 1.0236 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 43403 DIA 14MM SH 0.5512 LOC 1.0236 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 13622 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.5039 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

MELIN 13622 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.5039 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 19989 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 19989 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 42208 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 42208 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing