Indexable Drill

Sort by
Picture of INGERSOLL QR0215088JFR00 0.847 (21.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0215088JFR00 0.847 (21.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0215088JFR00

$641.55
Picture of INGERSOLL QR0254102N6R02 1.000 (25.40 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0254102N6R02 1.000 (25.40 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0254102N6R02

$641.55
Picture of INGERSOLL QR0250100N6R02 0.984 (24.99 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0250100N6R02 0.984 (24.99 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0250100N6R02

$641.55
Picture of INGERSOLL QR0222089N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0222089N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0222089N5R02

$641.55
Picture of INGERSOLL QR0230092JFR00 0.906 (23.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0230092JFR00 0.906 (23.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0230092JFR00

$641.55
Picture of INGERSOLL QR0225092JFR00 0.886 (22.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0225092JFR00 0.886 (22.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0225092JFR00

$641.55
Picture of INGERSOLL QR0238095N6R02 0.937 (23.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0238095N6R02 0.937 (23.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0238095N6R02

$641.55
Picture of INGERSOLL QR0214086N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0214086N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0214086N5R02

$641.55
Picture of INGERSOLL QR0220088JFR00 0.866 (22.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0220088JFR00 0.866 (22.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0220088JFR00

$641.55
Picture of INGERSOLL QR0240096JFR00 0.945 (24.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0240096JFR00 0.945 (24.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0240096JFR00

$641.55
Picture of INGERSOLL TD1900228T5R00 0.7480 (19.000 mm)-0.7835 (19.900 mm) GoldTwist Body

INGERSOLL TD1900228T5R00 0.7480 (19.000 mm)-0.7835 (19.900 mm) GoldTwist Body

ISO: TD1900228T5R00

$641.55
Picture of INGERSOLL QR0246098N6R02 0.969 (24.61 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0246098N6R02 0.969 (24.61 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0246098N6R02

$641.55
Picture of INGERSOLL TD2000240T5R00 0.7874 (20.000 mm)-0.8228 (20.900 mm) GoldTwist Body

INGERSOLL TD2000240T5R00 0.7874 (20.000 mm)-0.8228 (20.900 mm) GoldTwist Body

ISO: TD2000240T5R00

$641.55
Picture of INGERSOLL QR0245100JFR00 0.965 (24.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0245100JFR00 0.965 (24.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0245100JFR00

$641.55
Picture of INGERSOLL Q0175070N5R01 0.688 (17.48 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0175070N5R01 0.688 (17.48 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0175070N5R01

$640.64
Picture of INGERSOLL QR0330066JGR00 1.299 (33.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0330066JGR00 1.299 (33.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0330066JGR00

$640.64
Picture of INGERSOLL Q0183073N5R01 0.719 (18.26 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0183073N5R01 0.719 (18.26 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0183073N5R01

$640.64
Picture of INGERSOLL QR0325065N6R02 1.281 (32.54 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0325065N6R02 1.281 (32.54 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0325065N6R02

$640.64
Picture of INGERSOLL QR0310062JGR00 1.221 (31.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0310062JGR00 1.221 (31.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0310062JGR00

$640.64
Picture of INGERSOLL QR0318063N6R02 1.252 (31.80 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0318063N6R02 1.252 (31.80 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0318063N6R02

$640.64
Picture of INGERSOLL Q0191076N5R01 0.750 (19.05 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0191076N5R01 0.750 (19.05 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0191076N5R01

$640.64
Picture of INGERSOLL Q0159064N5R01 0.626 (15.90 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0159064N5R01 0.626 (15.90 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0159064N5R01

$640.64
Picture of INGERSOLL Q0198079N5R01 0.781 (19.84 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0198079N5R01 0.781 (19.84 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0198079N5R01

$640.64
Picture of INGERSOLL Q0167067N5R01 0.657 (16.69 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0167067N5R01 0.657 (16.69 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0167067N5R01

$640.64
Picture of INGERSOLL QR0333067N6R02 1.312 (33.32 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0333067N6R02 1.312 (33.32 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0333067N6R02

$640.64
Picture of INGERSOLL QR0310062N6R02 1.219 (30.96 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0310062N6R02 1.219 (30.96 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0310062N6R02

$640.64
Picture of ZCC ZTD03-1.781"-XP1.50"-SP14-02 1.781" DIA Square Insert Drill

ZCC ZTD03-1.781"-XP1.50"-SP14-02 1.781" DIA Square Insert Drill

$639.97
Picture of TUNGALOY C4TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C4TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C4TDX200L101-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY C6TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C6TDX200L101-3 20mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C6TDX200L101-3

Call (262) 251-4020 for pricing
Picture of INGERSOLL TD2500125S9R01 0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body

INGERSOLL TD2500125S9R01 0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body

ISO: TD2500125S9R01

$637.91
Picture of ISCAR DCM 0906-725-100A-8D 0.906 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0906-725-100A-8D 0.906 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0906-725-100A-8D

$637.44
Picture of ISCAR DCM 0945-756-100A-8D 0.945 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0945-756-100A-8D 0.945 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0945-756-100A-8D

$637.44
Picture of INGERSOLL LD2800084JGR00 1.1024 (28.0 mm)-1.1378 (28.9 mm) SpadeTwist Body

INGERSOLL LD2800084JGR00 1.1024 (28.0 mm)-1.1378 (28.9 mm) SpadeTwist Body

ISO: LD2800084JGR00

$637.00
Picture of INGERSOLL LD2900087N6R01 1.1417 (29.0 mm)-1.1772 (29.9 mm) SpadeTwist Body

INGERSOLL LD2900087N6R01 1.1417 (29.0 mm)-1.1772 (29.9 mm) SpadeTwist Body

ISO: LD2900087N6R01

$637.00
Picture of INGERSOLL LD3000090N6R01 1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body

INGERSOLL LD3000090N6R01 1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body

ISO: LD3000090N6R01

$637.00
Picture of INGERSOLL LD2900087JGR00 1.1417 (29.0 mm)-1.1772 (29.9 mm) SpadeTwist Body

INGERSOLL LD2900087JGR00 1.1417 (29.0 mm)-1.1772 (29.9 mm) SpadeTwist Body

ISO: LD2900087JGR00

$637.00
Picture of INGERSOLL LD3000090JGR00 1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body

INGERSOLL LD3000090JGR00 1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body

ISO: LD3000090JGR00

$637.00
Picture of INGERSOLL LD2800084N6R01 1.1024 (28.0 mm)-1.1378 (28.9 mm) SpadeTwist Body

INGERSOLL LD2800084N6R01 1.1024 (28.0 mm)-1.1378 (28.9 mm) SpadeTwist Body

ISO: LD2800084N6R01

$637.00
Picture of TUNGALOY TDSCA63-66 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

TUNGALOY TDSCA63-66 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

ISO: TDSCA63-66

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSCA74-80 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

TUNGALOY TDSCA74-80 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

ISO: TDSCA74-80

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSCA55-56 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=55 - 80mm, diameter adjustable with setting plate

TUNGALOY TDSCA55-56 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=55 - 80mm, diameter adjustable with setting plate

ISO: TDSCA55-56

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSCA57-62 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

TUNGALOY TDSCA57-62 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

ISO: TDSCA57-62

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSCA67-73 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

TUNGALOY TDSCA67-73 TungDrill Big series, TDS cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

ISO: TDSCA67-73

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0167084N5R02 0.658 (16.71 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0167084N5R02 0.658 (16.71 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0167084N5R02

$635.19
Picture of INGERSOLL QR0159080N5R02 0.626 (15.90 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0159080N5R02 0.626 (15.90 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0159080N5R02

$635.19
Picture of INGERSOLL QR0185095JFR00 0.728 (18.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0185095JFR00 0.728 (18.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0185095JFR00

$635.19
Picture of INGERSOLL QR0180090JFR00 0.709 (18.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0180090JFR00 0.709 (18.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0180090JFR00

$635.19
Picture of INGERSOLL QR0175090JFR00 0.689 (17.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0175090JFR00 0.689 (17.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0175090JFR00

$635.19
Picture of INGERSOLL QR0198099N5R02 0.780 (19.81 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0198099N5R02 0.780 (19.81 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0198099N5R02

$635.19
Picture of INGERSOLL QR0165085JFR00 0.650 (16.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0165085JFR00 0.650 (16.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0165085JFR00

$635.19
Picture of INGERSOLL QR0191095N5R02 0.750 (19.05 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0191095N5R02 0.750 (19.05 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0191095N5R02

$635.19
Picture of INGERSOLL QR0183092N5R02 0.719 (18.26 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0183092N5R02 0.719 (18.26 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0183092N5R02

$635.19
Picture of INGERSOLL QR0195100JFR00 0.768 (19.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0195100JFR00 0.768 (19.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0195100JFR00

$635.19
Picture of INGERSOLL QR0170085JFR00 0.669 (17.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0170085JFR00 0.669 (17.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0170085JFR00

$635.19
Picture of INGERSOLL QR0160080JER00 0.630 (16.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0160080JER00 0.630 (16.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0160080JER00

$635.19
Picture of INGERSOLL QR0190095JFR00 0.748 (19.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0190095JFR00 0.748 (19.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0190095JFR00

$635.19
Picture of INGERSOLL QR0200100JFR00 0.787 (20.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0200100JFR00 0.787 (20.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0200100JFR00

$635.19
Picture of INGERSOLL QR0175088N5R02 0.689 (17.50 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0175088N5R02 0.689 (17.50 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0175088N5R02

$635.19
Picture of ZCC ZTD05-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

ZCC ZTD05-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

$634.58
Picture of INGERSOLL LD2300115JFR00 0.9055 (23.0 mm)-0.9409 (23.9 mm) SpadeTwist Body

INGERSOLL LD2300115JFR00 0.9055 (23.0 mm)-0.9409 (23.9 mm) SpadeTwist Body

ISO: LD2300115JFR00

$633.36
Picture of INGERSOLL LD2300115N5R01 0.9055 (23.0 mm)-0.9410 (23.9 mm) SpadeTwist Body

INGERSOLL LD2300115N5R01 0.9055 (23.0 mm)-0.9410 (23.9 mm) SpadeTwist Body

ISO: LD2300115N5R01

$633.36
Picture of INGERSOLL LD2400120JGR00 0.9449 (24.0 mm)-0.9803 (24.9 mm) SpadeTwist Body

INGERSOLL LD2400120JGR00 0.9449 (24.0 mm)-0.9803 (24.9 mm) SpadeTwist Body

ISO: LD2400120JGR00

$633.36
Picture of INGERSOLL LD2400120N6R01 0.9448 (24.0 mm)-0.9803 (24.9 mm) SpadeTwist Body

INGERSOLL LD2400120N6R01 0.9448 (24.0 mm)-0.9803 (24.9 mm) SpadeTwist Body

ISO: LD2400120N6R01

$633.36
Picture of ISCAR DFN 1496-224-125A-1.5D-IQ 1.496" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DFN 1496-224-125A-1.5D-IQ 1.496" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DFN 1496-224-125A-1.5D-IQ

$631.68
Picture of ISCAR DFN 1457-218-125A-1.5D-IQ 1.457" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DFN 1457-218-125A-1.5D-IQ 1.457" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DFN 1457-218-125A-1.5D-IQ

$631.68
Picture of ISCAR DFN 1417-212-125A-1.5D-IQ 1.417" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DFN 1417-212-125A-1.5D-IQ 1.417" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DFN 1417-212-125A-1.5D-IQ

$631.68
Picture of TUNGALOY TDX235F25-3 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX235F25-3 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX235F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0937FS-03 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-0937FS-03 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-0937FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX240F25-3 24mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX240F25-3 24mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX240F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX245F25-3 24.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX245F25-3 24.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX245F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX230F25-3 23mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX230F25-3 23mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX230F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1000FS-03 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-1000FS-03 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-1000FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX250F25-3 25mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX250F25-3 25mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX250F25-3

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1181-177-125A-1.5D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 1181-177-125A-1.5D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 1181-177-125A-1.5D

$629.76
Picture of ISCAR DR1125-2250-125-09-2D-N 1-1/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1125-2250-125-09-2D-N 1-1/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1125-2250-125-09-2D-N

$629.76
Picture of ISCAR DCN 1142-171-125A-1.5D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 1142-171-125A-1.5D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 1142-171-125A-1.5D

$629.76
Picture of ISCAR DR1062-2125-125-09-2D-N 1.062" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1062-2125-125-09-2D-N 1.062" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1062-2125-125-09-2D-N

$629.76
Picture of ISCAR DR1031-2062-125-09-2D-N 1.031" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1031-2062-125-09-2D-N 1.031" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1031-2062-125-09-2D-N

$629.76
Picture of ISCAR DR1187-2375-125-09-2D-N 1.187" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1187-2375-125-09-2D-N 1.187" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1187-2375-125-09-2D-N

$629.76
Picture of INGERSOLL TD2400120JGR00 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

INGERSOLL TD2400120JGR00 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

ISO: TD2400120JGR00

$627.91
Picture of INGERSOLL TD2300115JGR00 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

INGERSOLL TD2300115JGR00 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

ISO: TD2300115JGR00

$627.91
Picture of INGERSOLL TD2400120B7R01 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

INGERSOLL TD2400120B7R01 0.9449 (24.0 mm)-0.9803 (24.9 mm) GoldTwist Body

ISO: TD2400120B7R01

$627.91
Picture of INGERSOLL TD2300115B7R01 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

INGERSOLL TD2300115B7R01 0.9055 (23.0 mm)-0.9409 (23.9 mm) GoldTwist Body

ISO: TD2300115B7R01

$627.91
Picture of WIDIA/KENNAMETAL TDM210R5SCF25M TDM1 SCF Drill BODY 5XD D=21.0

WIDIA/KENNAMETAL TDM210R5SCF25M TDM1 SCF Drill BODY 5XD D=21.0

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0313R5SCF050 TDM1 Drill BODY INCH SCF 5XD D

WIDIA/KENNAMETAL TDM0313R5SCF050 TDM1 Drill BODY INCH SCF 5XD D

Call (262) 251-4020 for pricing
Picture of ISCAR D3N 0827-413-100R-5D 0.827" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISCAR D3N 0827-413-100R-5D 0.827" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISO: D3N 0827-413-100R-5D

$624.96
Picture of ISCAR DCN 0984-295-125A-3D 0.984" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 0984-295-125A-3D 0.984" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 0984-295-125A-3D

$624.96
Picture of ISCAR DCN 1024-307-125A-3D 1.024" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1024-307-125A-3D 1.024" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1024-307-125A-3D

$624.96
Picture of ISCAR D3N 0866-433-100R-5D 0.866" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISCAR D3N 0866-433-100R-5D 0.866" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISO: D3N 0866-433-100R-5D

$624.96
Picture of INGERSOLL QR0278083N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0278083N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0278083N6R02

$624.27
Picture of INGERSOLL QR0300090JGR00 1.181 (30.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0300090JGR00 1.181 (30.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0300090JGR00

$624.27
Picture of INGERSOLL QR0294088N6R02 1.156 (29.36 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0294088N6R02 1.156 (29.36 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0294088N6R02

$624.27
Picture of INGERSOLL QR0290087JGR00 1.142 (29.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0290087JGR00 1.142 (29.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0290087JGR00

$624.27
Picture of INGERSOLL QR0286086N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0286086N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0286086N6R02

$624.27
Picture of INGERSOLL QR0275084JFR00 1.083 (27.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0275084JFR00 1.083 (27.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0275084JFR00

$624.27
Picture of INGERSOLL QR0302090N6R02 1.187 (30.15 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0302090N6R02 1.187 (30.15 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0302090N6R02

$624.27
Picture of INGERSOLL QR0260078JFR00 1.024 (26.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0260078JFR00 1.024 (26.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0260078JFR00

$624.27
Picture of INGERSOLL QR0270081JFR00 1.063 (27.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0270081JFR00 1.063 (27.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0270081JFR00

$624.27
Picture of INGERSOLL QR0255078JFR00 1.004 (25.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0255078JFR00 1.004 (25.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0255078JFR00

$624.27
Picture of INGERSOLL QR0262079N6R02 1.031 (26.19 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0262079N6R02 1.031 (26.19 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0262079N6R02

$624.27
Picture of INGERSOLL QR0270081N6R02 1.063 (27.00 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0270081N6R02 1.063 (27.00 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0270081N6R02

$624.27
Picture of INGERSOLL QR0280084JFR00 1.102 (28.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0280084JFR00 1.102 (28.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0280084JFR00

$624.27
Picture of TUNGALOY TDXCA63-66 TungDrill Big series set, TDX cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

TUNGALOY TDXCA63-66 TungDrill Big series set, TDX cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

ISO: TDXCA63-66

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXCA55-56 TungDrill Big series, TDX cartridge set, L/D=2.5, dia=55 - 80mm, diameter adjustable with setting plate

TUNGALOY TDXCA55-56 TungDrill Big series, TDX cartridge set, L/D=2.5, dia=55 - 80mm, diameter adjustable with setting plate

ISO: TDXCA55-56

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXCA74-80 TungDrill Big series set, TDX cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

TUNGALOY TDXCA74-80 TungDrill Big series set, TDX cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

ISO: TDXCA74-80

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXCA57-62 TungDrill Big series set, TDX cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

TUNGALOY TDXCA57-62 TungDrill Big series set, TDX cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

ISO: TDXCA57-62

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXCA67-73 TungDrill Big series set, TDX cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

TUNGALOY TDXCA67-73 TungDrill Big series set, TDX cartridge set, L/D=2.5, dia=2.250 - 3.157inch, diameter adjustable with setting plate

ISO: TDXCA67-73

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0906R8SS094 TDM1 Drill BODY INCH SS 8XD D=

WIDIA/KENNAMETAL TDM0906R8SS094 TDM1 Drill BODY INCH SS 8XD D=

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU0812F-4 0.812" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU0812F-4 0.812" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU0812F-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS205F25-4 20.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS205F25-4 20.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS205F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS200F25-4 20mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS200F25-4 20mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS200F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX200F25-4 20mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX200F25-4 20mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX200F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0625FS-04 5/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-0625FS-04 5/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-0625FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0687FS-04 0.687" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-0687FS-04 0.687" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-0687FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX205F25-4 20.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX205F25-4 20.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX205F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX165F20-4 16.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX165F20-4 16.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX165F20-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX185F25-4 18.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX185F25-4 18.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX185F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX170F20-4 17mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX170F20-4 17mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX170F20-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX180F25-4 18mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX180F25-4 18mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX180F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX160F20-4 16mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX160F20-4 16mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX160F20-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX190F25-4 19mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX190F25-4 19mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX190F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0750FS-04 3/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-0750FS-04 3/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-0750FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX175F25-4 17.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX175F25-4 17.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX175F25-4

Call (262) 251-4020 for pricing
Picture of ISCAR DR0625-2500-075-05-4D-N 5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0625-2500-075-05-4D-N 5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0625-2500-075-05-4D-N

$620.16
Picture of ISCAR DR0709-2836-100-06-4D-N 0.709" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0709-2836-100-06-4D-N 0.709" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0709-2836-100-06-4D-N

$620.16
Picture of ISCAR DR0688-2750-075-05-4D-N 0.688" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0688-2750-075-05-4D-N 0.688" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0688-2750-075-05-4D-N

$620.16
Picture of ISCAR DR0656-2625-075-05-4D-N 0.656" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0656-2625-075-05-4D-N 0.656" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0656-2625-075-05-4D-N

$620.16
Picture of ISCAR DR0734-2937-100-06-4D-N 0.734" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0734-2937-100-06-4D-N 0.734" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0734-2937-100-06-4D-N

$620.16
Picture of ISCAR DR0781-3125-100-06-4D-N 0.781" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0781-3125-100-06-4D-N 0.781" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0781-3125-100-06-4D-N

$620.16
Picture of ISCAR DR0703-2812-075-05-4D-N 0.703" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0703-2812-075-05-4D-N 0.703" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0703-2812-075-05-4D-N

$620.16
Picture of ISCAR DR0750-3000-100-06-4D-N 3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0750-3000-100-06-4D-N 3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0750-3000-100-06-4D-N

$620.16
Picture of INGERSOLL TD2200176S1R01 0.8661 (22.000 mm)-0.9016 (22.900 mm) GoldTwist Body

INGERSOLL TD2200176S1R01 0.8661 (22.000 mm)-0.9016 (22.900 mm) GoldTwist Body

ISO: TD2200176S1R01

$618.80
Picture of INGERSOLL TD2100168S1R01 0.8268 (21.000 mm)-0.8622 (21.900 mm) GoldTwist Body

INGERSOLL TD2100168S1R01 0.8268 (21.000 mm)-0.8622 (21.900 mm) GoldTwist Body

ISO: TD2100168S1R01

$618.80
Picture of ISCAR DCNS 0984-492-098B-5D 0.984" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0984-492-098B-5D 0.984" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISO: DCNS 0984-492-098B-5D

$618.24
Picture of INGERSOLL Q0127064N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0127064N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0127064N5R01

$616.99
Picture of INGERSOLL Q0135067N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0135067N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0135067N5R01

$616.99
Picture of ISCAR DCN 0669-803-075R-12D 0.669" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0669-803-075R-12D 0.669" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0669-803-075R-12D

$613.44
Picture of ISCAR DCN 0709-850-100R-12D 0.709" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0709-850-100R-12D 0.709" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0709-850-100R-12D

$613.44
Picture of TUNGALOY TDS230F25-2 23mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS230F25-2 23mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS230F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS235F25-2 23.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS235F25-2 23.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS235F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS210F25-3 21mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS210F25-3 21mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS210F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU0937F-2 0.937" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDSU0937F-2 0.937" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDSU0937F-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS250F25-2 25mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS250F25-2 25mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS250F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS255F25-2 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS255F25-2 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS255F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS215F25-3 21.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS215F25-3 21.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS215F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS245F25-2 24.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS245F25-2 24.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS245F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS220F25-3 22mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS220F25-3 22mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS220F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS240F25-2 24mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS240F25-2 24mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS240F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU0875F-2 7/8" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDSU0875F-2 7/8" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDSU0875F-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS225F25-3 22.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS225F25-3 22.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS225F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU0812F-3 0.812" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU0812F-3 0.812" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU0812F-3

Call (262) 251-4020 for pricing
Picture of ZCC ZTD04-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

ZCC ZTD04-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

$613.05
Picture of INGERSOLL Q0222067N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0222067N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0222067N5R02

$611.52
Picture of INGERSOLL Q0143057N5R01 0.563 (14.30 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0143057N5R01 0.563 (14.30 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0143057N5R01

$611.52
Picture of INGERSOLL Q0206062N5R01 0.813 (20.65 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0206062N5R01 0.813 (20.65 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0206062N5R01

$611.52
Picture of INGERSOLL Q0150060N5R01 0.594 (15.09 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0150060N5R01 0.594 (15.09 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0150060N5R01

$611.52
Picture of INGERSOLL Q0246074N6R01 0.969 (24.61 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0246074N6R01 0.969 (24.61 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0246074N6R01

$611.52
Picture of INGERSOLL Q0254076N6R01 1.000 (25.40 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0254076N6R01 1.000 (25.40 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0254076N6R01

$611.52
Picture of INGERSOLL Q0214064N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0214064N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0214064N5R02

$611.52
Picture of INGERSOLL Q0250075N6R01 0.984 (24.99 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0250075N6R01 0.984 (24.99 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0250075N6R01

$611.52
Picture of INGERSOLL Q0230069N6R01 0.906 (23.01 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0230069N6R01 0.906 (23.01 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0230069N6R01

$611.52
Picture of INGERSOLL Q0238071N6R01 0.938 (23.83 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0238071N6R01 0.938 (23.83 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0238071N6R01

$611.52
Picture of ISCAR DCM 0866-693-100A-8D 0.866 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0866-693-100A-8D 0.866 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0866-693-100A-8D

$610.56
Picture of ISCAR DCNT0807-165-100A-7/8UNF 0.787 Indexable Head Drill s with Chamfer ing Inserts Mainly for Pre-Thread Holes

ISCAR DCNT0807-165-100A-7/8UNF 0.787 Indexable Head Drill s with Chamfer ing Inserts Mainly for Pre-Thread Holes

ISO: DCNT0807-165-100A-7/8UNF

$608.64
Picture of WIDIA/KENNAMETAL TDMX250R5SL32M TDMX Drill BODY D=25MM 5XD SL

WIDIA/KENNAMETAL TDMX250R5SL32M TDMX Drill BODY D=25MM 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0945R5SL125 TDMX Drill BODY D.945 5XD SL S

WIDIA/KENNAMETAL TDMX0945R5SL125 TDMX Drill BODY D.945 5XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX240R5SL32M TDMX Drill BODY D=24MM 5XD SL

WIDIA/KENNAMETAL TDMX240R5SL32M TDMX Drill BODY D=24MM 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0985R5SL125 TDMX Drill BODY D.985 5XD SL S

WIDIA/KENNAMETAL TDMX0985R5SL125 TDMX Drill BODY D.985 5XD SL S

Call (262) 251-4020 for pricing
Picture of TUNGALOY C4TDX150L082-3 15mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C4TDX150L082-3 15mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C4TDX150L082-3

Call (262) 251-4020 for pricing
Picture of K-Tool FB-2500 Multi Insert Drill 2.500 Cutter Diameter 2.000 Weldon

K-Tool FB-2500 Multi Insert Drill 2.500 Cutter Diameter 2.000 Weldon

ANSI: FB-2500

ISO: FB-2500

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID240F32-3 24mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID240F32-3 24mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID240F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID230F32-3 23mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID230F32-3 23mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID230F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0945F1250-3 0.945" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0945F1250-3 0.945" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0945F1250-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0906F1250-3 0.906" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0906F1250-3 0.906" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0906F1250-3

Call (262) 251-4020 for pricing
Picture of K-Tool FB-2125-3 Multi Insert Drill 2.125 Cutter Diameter 2.000 Weldon

K-Tool FB-2125-3 Multi Insert Drill 2.125 Cutter Diameter 2.000 Weldon

ANSI: FB-2125-3

ISO: FB-2125-3

Call (262) 251-4020 for pricing
Picture of K-Tool FB-2250-3 Multi Insert Drill 2.250 Cutter Diameter 2.000 Weldon

K-Tool FB-2250-3 Multi Insert Drill 2.250 Cutter Diameter 2.000 Weldon

ANSI: FB-2250-3

ISO: FB-2250-3

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0150075N5R02 0.591 (15.01 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150075N5R02 0.591 (15.01 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150075N5R02

$603.33
Picture of INGERSOLL QR0130065JER00 0.512 (13.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0130065JER00 0.512 (13.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0130065JER00

$603.33
Picture of INGERSOLL QR0150075JER00 0.591 (15.01 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150075JER00 0.591 (15.01 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150075JER00

$603.33
Picture of INGERSOLL QR0140070JER00 0.551 (14.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0140070JER00 0.551 (14.00 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0140070JER00

$603.33
Picture of INGERSOLL QR0125063JER00 0.492 (12.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0125063JER00 0.492 (12.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0125063JER00

$603.33
Picture of INGERSOLL QR0120060JER00 0.472 (11.99 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0120060JER00 0.472 (11.99 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0120060JER00

$603.33
Picture of INGERSOLL QR0127064N5R02 0.500 (12.70 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0127064N5R02 0.500 (12.70 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0127064N5R02

$603.33
Picture of INGERSOLL QR0135070JER00 0.531 (13.49 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135070JER00 0.531 (13.49 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135070JER00

$603.33
Picture of INGERSOLL QR0145075JER00 0.571 (14.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0145075JER00 0.571 (14.50 mm) Square Insert Indexable Metric Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0145075JER00

$603.33
Picture of INGERSOLL QR0135068N5R02 0.531 (13.49 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135068N5R02 0.531 (13.49 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135068N5R02

$603.33
Picture of INGERSOLL QR0143072N5R02 0.563 (14.30 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0143072N5R02 0.563 (14.30 mm) Square Insert Indexable Inch Drill s|L:D Ratio - 5:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0143072N5R02

$603.33
Picture of ISCAR DCN 1102-331-125R-3D 1.102" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 1102-331-125R-3D 1.102" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 1102-331-125R-3D

$601.92
Picture of ISCAR DFN 1378-206-125A-1.5D-IQ 1.378" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DFN 1378-206-125A-1.5D-IQ 1.378" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DFN 1378-206-125A-1.5D-IQ

$601.92
Picture of ISCAR DFN 1339-200-125A-1.5D-IQ 1.339" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DFN 1339-200-125A-1.5D-IQ 1.339" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DFN 1339-200-125A-1.5D-IQ

$601.92
Picture of ISCAR DCN 1063-319-125R-3D 1.063" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 1063-319-125R-3D 1.063" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 1063-319-125R-3D

$601.92
Picture of ISCAR DFN 1299-195-125A-1.5D-IQ 1.299" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DFN 1299-195-125A-1.5D-IQ 1.299" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DFN 1299-195-125A-1.5D-IQ

$601.92
Picture of TUNGALOY TDXU-0812FS-03 0.812" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-0812FS-03 0.812" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-0812FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1000FS-02 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1000FS-02 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1000FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0937FS-02 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0937FS-02 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0937FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX235F25-2 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX235F25-2 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX235F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX215F25-3 21.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX215F25-3 21.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX215F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX245F25-2 24.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX245F25-2 24.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX245F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX225F25-3 22.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX225F25-3 22.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX225F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0875FS-03 7/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-0875FS-03 7/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-0875FS-03

Call (262) 251-4020 for pricing