Indexable Drill

Sort by
Picture of INGERSOLL LD2100168N5R01 0.8268 (21.0 mm)-0.8662 (22.0 mm) SpadeTwist Body

INGERSOLL LD2100168N5R01 0.8268 (21.0 mm)-0.8662 (22.0 mm) SpadeTwist Body

ISO: LD2100168N5R01

$690.69
Picture of INGERSOLL LD2100168JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

INGERSOLL LD2100168JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

ISO: LD2100168JFR00

$690.69
Picture of INGERSOLL LD2200176JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200176JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200176JFR00

$690.69
Picture of ISCAR D3N 0827-413-100A-5D 0.827" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR D3N 0827-413-100A-5D 0.827" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: D3N 0827-413-100A-5D

$688.32
Picture of ISCAR D3N 0866-433-100A-5D 0.866" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR D3N 0866-433-100A-5D 0.866" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: D3N 0866-433-100A-5D

$688.32
Picture of ISCAR D3N 0945-472-125R-5D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISCAR D3N 0945-472-125R-5D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISO: D3N 0945-472-125R-5D

$687.36
Picture of ISCAR D3N 0906-453-125R-5D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISCAR D3N 0906-453-125R-5D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 5xD

ISO: D3N 0906-453-125R-5D

$687.36
Picture of INGERSOLL Q0270081N6R01 1.063 (27.00 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0270081N6R01 1.063 (27.00 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0270081N6R01

$687.05
Picture of INGERSOLL Q0302090N6R01 1.187 (30.15 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0302090N6R01 1.187 (30.15 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0302090N6R01

$687.05
Picture of INGERSOLL Q0262079N6R01 1.031 (26.19 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0262079N6R01 1.031 (26.19 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0262079N6R01

$687.05
Picture of INGERSOLL Q0294088N6R01 1.156 (29.36 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0294088N6R01 1.156 (29.36 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0294088N6R01

$687.05
Picture of INGERSOLL Q0278083N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0278083N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0278083N6R02

$687.05
Picture of INGERSOLL TD2100168JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100168JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100168JFR00

$686.15
Picture of INGERSOLL TD2100168C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100168C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100168C8R01

$686.15
Picture of INGERSOLL TD2200176JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200176JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200176JFR00

$686.15
Picture of INGERSOLL TD2200176C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200176C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200176C8R01

$686.15
Picture of WIDIA/KENNAMETAL TDM0984R8SS100 TDM1 Drill BODY INCH SS 8XD D=

WIDIA/KENNAMETAL TDM0984R8SS100 TDM1 Drill BODY INCH SS 8XD D=

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0945R8SS100 TDM1 Drill BODY INCH SS 8XD D=

WIDIA/KENNAMETAL TDM0945R8SS100 TDM1 Drill BODY INCH SS 8XD D=

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0827R12SF100 TDMX BODY D.827 12XD SF Shank

WIDIA/KENNAMETAL TDMX0827R12SF100 TDMX BODY D.827 12XD SF Shank

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0788R12SF100 TDMX BODY D.788 12XD SF Shank

WIDIA/KENNAMETAL TDMX0788R12SF100 TDMX BODY D.788 12XD SF Shank

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX210R12SF25M TDMX BODY D=21MM 12XD SF Shank

WIDIA/KENNAMETAL TDMX210R12SF25M TDMX BODY D=21MM 12XD SF Shank

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX200R12SF25M TDMX BODY D=20MM 12XD SF Shank

WIDIA/KENNAMETAL TDMX200R12SF25M TDMX BODY D=20MM 12XD SF Shank

Call (262) 251-4020 for pricing
Picture of ISCAR DR0812-3250-100-06-4D-N 0.812" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0812-3250-100-06-4D-N 0.812" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0812-3250-100-06-4D-N

$683.52
Picture of ISCAR DR0984-3936-125-09-4D-N 0.984" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0984-3936-125-09-4D-N 0.984" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0984-3936-125-09-4D-N

$683.52
Picture of ISCAR DR0937-3750-100-07-4D-N 0.937" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0937-3750-100-07-4D-N 0.937" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0937-3750-100-07-4D-N

$683.52
Picture of ISCAR DR0906-3625-100-07-4D-N 0.906" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0906-3625-100-07-4D-N 0.906" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0906-3625-100-07-4D-N

$683.52
Picture of ISCAR DR0875-3500-100-07-4D-N 7/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0875-3500-100-07-4D-N 7/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0875-3500-100-07-4D-N

$683.52
Picture of ISCAR DR1000-4000-125-09-4D-N 1" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR1000-4000-125-09-4D-N 1" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR1000-4000-125-09-4D-N

$683.52
Picture of ISCAR DR0844-3375-100-07-4D-N 0.844" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISCAR DR0844-3375-100-07-4D-N 0.844" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 4xD

ISO: DR0844-3375-100-07-4D-N

$683.52
Picture of INGERSOLL TD2300184S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

INGERSOLL TD2300184S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

ISO: TD2300184S9R01

$683.41
Picture of INGERSOLL TD2400192S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

INGERSOLL TD2400192S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

ISO: TD2400192S9R01

$683.41
Picture of ISCAR DR1281-2562-125-09-2D-N 1.281" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1281-2562-125-09-2D-N 1.281" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1281-2562-125-09-2D-N

$682.56
Picture of ISCAR DR1250-2500-125-09-2D-N 1-1/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1250-2500-125-09-2D-N 1-1/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1250-2500-125-09-2D-N

$682.56
Picture of ISCAR DR1219-2438-125-09-2D-N 1.219" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1219-2438-125-09-2D-N 1.219" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1219-2438-125-09-2D-N

$682.56
Picture of ISCAR DR1312-2625-125-09-2D-N 1.312" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1312-2625-125-09-2D-N 1.312" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1312-2625-125-09-2D-N

$682.56
Picture of TUNGALOY TDX195F25-5 19.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX195F25-5 19.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX195F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0687FS-05 0.687" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0687FS-05 0.687" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0687FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX190F25-5 19mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX190F25-5 19mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX190F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0750FS-05 3/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0750FS-05 3/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0750FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX175F25-5 17.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX175F25-5 17.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX175F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX170F20-5 17mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX170F20-5 17mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX170F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX185F25-5 18.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX185F25-5 18.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX185F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX200F25-5 20mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX200F25-5 20mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX200F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX160F20-5 16mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX160F20-5 16mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX160F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX205F25-5 20.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX205F25-5 20.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX205F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX165F20-5 16.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX165F20-5 16.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX165F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX180F25-5 18mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX180F25-5 18mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX180F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0625FS-05 5/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0625FS-05 5/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0625FS-05

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0357071N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0357071N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0357071N6R02

$678.87
Picture of INGERSOLL QR0365073N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0365073N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0365073N6R02

$678.87
Picture of INGERSOLL QR0341068N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0341068N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0341068N6R02

$678.87
Picture of INGERSOLL QR0349070N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0349070N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0349070N6R02

$678.87
Picture of INGERSOLL QR0360072JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0360072JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0360072JGR00

$678.87
Picture of INGERSOLL QR0340068JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0340068JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0340068JGR00

$678.87
Picture of INGERSOLL QR0350070JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0350070JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0350070JGR00

$678.87
Picture of TUNGALOY TIDU0984F1250-3 0.984" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0984F1250-3 0.984" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0984F1250-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS260F32-3 26mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS260F32-3 26mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS260F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS270F32-3 27mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS270F32-3 27mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS270F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1024F1250-3 1.024" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1024F1250-3 1.024" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1024F1250-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID250F32-3 25mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID250F32-3 25mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID250F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1063F1250-3 1.063" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1063F1250-3 1.063" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1063F1250-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS290F32-2 29mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS290F32-2 29mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS290F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS300F32-2 30mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS300F32-2 30mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS300F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1187-02 1.187" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1187-02 1.187" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1187-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS280F32-2 28mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS280F32-2 28mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS280F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1125-02 1-1/8" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1125-02 1-1/8" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1125-02

Call (262) 251-4020 for pricing
Picture of ZCC ZTD03-1.813"-XP1.50"-SP14-02 1.813" DIA Square Insert Drill

ZCC ZTD03-1.813"-XP1.50"-SP14-02 1.813" DIA Square Insert Drill

$677.60
Picture of TUNGALOY TDXU-1062FS-02 1.062" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1062FS-02 1.062" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1062FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1125FS-02 1-1/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1125FS-02 1-1/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1125FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1187FS-02 1.187" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1187FS-02 1.187" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1187FS-02

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX260R5SL32M TDMX Drill BODY D=26MM 5XD SL

WIDIA/KENNAMETAL TDMX260R5SL32M TDMX Drill BODY D=26MM 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1063R5SL125 TDMX Drill BODY D1.063 5XD SL

WIDIA/KENNAMETAL TDMX1063R5SL125 TDMX Drill BODY D1.063 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1024R5SL125 TDMX Drill BODY D1.024 5XD SL

WIDIA/KENNAMETAL TDMX1024R5SL125 TDMX Drill BODY D1.024 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX270R5SL32M TDMX Drill BODY D=27MM 5XD SL

WIDIA/KENNAMETAL TDMX270R5SL32M TDMX Drill BODY D=27MM 5XD SL

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX300F32-2 30mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX300F32-2 30mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX300F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX280F32-2 28mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX280F32-2 28mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX280F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX290F32-2 29mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX290F32-2 29mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX290F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX270F32-2 27mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX270F32-2 27mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX270F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX260F25-2 26mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX260F25-2 26mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX260F25-2

Call (262) 251-4020 for pricing
Picture of ISCAR DFN 1457-437-125A-3D-IQ 1.457" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DFN 1457-437-125A-3D-IQ 1.457" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DFN 1457-437-125A-3D-IQ

$676.80
Picture of ISCAR DFN 1496-448-125A-3D-IQ 1.496" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DFN 1496-448-125A-3D-IQ 1.496" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DFN 1496-448-125A-3D-IQ

$676.80
Picture of ISCAR DFN 1417-425-125A-3D-IQ 1.417" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DFN 1417-425-125A-3D-IQ 1.417" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DFN 1417-425-125A-3D-IQ

$676.80
Picture of K-Tool FB-2750 Multi Insert Drill 2.750 Cutter Diameter 2.000 Weldon

K-Tool FB-2750 Multi Insert Drill 2.750 Cutter Diameter 2.000 Weldon

ANSI: FB-2750

ISO: FB-2750

Call (262) 251-4020 for pricing
Picture of ISCAR DR0750-3760-100-06-5D-N 3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0750-3760-100-06-5D-N 3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0750-3760-100-06-5D-N

$675.84
Picture of ISCAR DR0734-3661-100-06-5D-N 0.734" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0734-3661-100-06-5D-N 0.734" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0734-3661-100-06-5D-N

$675.84
Picture of ISCAR DR0781-3898-100-06-5D-N 0.781" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0781-3898-100-06-5D-N 0.781" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0781-3898-100-06-5D-N

$675.84
Picture of ISCAR DR0703-3524-075-05-5D-N 0.703" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0703-3524-075-05-5D-N 0.703" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0703-3524-075-05-5D-N

$675.84
Picture of ISCAR DR0688-3445-075-05-5D-N 0.688" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0688-3445-075-05-5D-N 0.688" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0688-3445-075-05-5D-N

$675.84
Picture of ISCAR DR0625-3130-075-05-5D-N 5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0625-3130-075-05-5D-N 5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0625-3130-075-05-5D-N

$675.84
Picture of ISCAR DR0656-3287-075-05-5D-N 0.656" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0656-3287-075-05-5D-N 0.656" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0656-3287-075-05-5D-N

$675.84
Picture of WIDIA/KENNAMETAL TDM220R8SCF25M TDM1 SCF Drill BODY 8XD D=22.0

WIDIA/KENNAMETAL TDM220R8SCF25M TDM1 SCF Drill BODY 8XD D=22.0

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0906R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

WIDIA/KENNAMETAL TDM0906R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM230R8SCF25M TDM1 SCF Drill BODY 8XD D=23.0

WIDIA/KENNAMETAL TDM230R8SCF25M TDM1 SCF Drill BODY 8XD D=23.0

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0318095N6R02 1.252 (31.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0318095N6R02 1.252 (31.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0318095N6R02

$675.23
Picture of INGERSOLL QR0310093N6R02 1.219 (30.96 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0310093N6R02 1.219 (30.96 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0310093N6R02

$675.23
Picture of INGERSOLL QR0333100N6R02 1.312 (33.32 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0333100N6R02 1.312 (33.32 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0333100N6R02

$675.23
Picture of INGERSOLL QR0325098N6R02 1.281 (32.54 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0325098N6R02 1.281 (32.54 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0325098N6R02

$675.23
Picture of INGERSOLL QR0330099JGR00 1.299 (33.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0330099JGR00 1.299 (33.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0330099JGR00

$675.23
Picture of INGERSOLL QR0320096JGR00 1.260 (32.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0320096JGR00 1.260 (32.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0320096JGR00

$675.23
Picture of INGERSOLL QR0310093JGR00 1.221 (31.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0310093JGR00 1.221 (31.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0310093JGR00

$675.23
Picture of INGERSOLL QR0305092JGR00 1.201 (30.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0305092JGR00 1.201 (30.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0305092JGR00

$675.23
Picture of ISCAR DCN 0748-898-100R-12D 0.748" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0748-898-100R-12D 0.748" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0748-898-100R-12D

$673.92
Picture of ISCAR DCN 0787-945-100R-12D 0.787" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISCAR DCN 0787-945-100R-12D 0.787" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 12xD

ISO: DCN 0787-945-100R-12D

$673.92
Picture of ZCC ZTD04-1.781"-XP1.50"-SP14-02 1.781" DIA Square Insert Drill

ZCC ZTD04-1.781"-XP1.50"-SP14-02 1.781" DIA Square Insert Drill

$672.22
Picture of ISCAR DCN 1024-512-125R-5D 1.024" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISCAR DCN 1024-512-125R-5D 1.024" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISO: DCN 1024-512-125R-5D

$670.08
Picture of ISCAR DCN 0984-492-125R-5D 0.984" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISCAR DCN 0984-492-125R-5D 0.984" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISO: DCN 0984-492-125R-5D

$670.08
Picture of ISCAR DCN 1220-366-125R-3D 1.22" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 1220-366-125R-3D 1.22" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 1220-366-125R-3D

$670.08
Picture of ISCAR DFN 1535-230-125A-1.5D-IQ 1.535" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DFN 1535-230-125A-1.5D-IQ 1.535" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DFN 1535-230-125A-1.5D-IQ

$670.08
Picture of ISCAR DCN 1260-378-125R-3D 1.26" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 1260-378-125R-3D 1.26" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 1260-378-125R-3D

$670.08
Picture of INGERSOLL YD2500125C8R01 0.9843 (25.0 mm) QwikTwist Body

INGERSOLL YD2500125C8R01 0.9843 (25.0 mm) QwikTwist Body

ISO: YD2500125C8R01

$665.87
Picture of INGERSOLL Q0143072N5R01 0.563 (14.30 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0143072N5R01 0.563 (14.30 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0143072N5R01

$665.21
Picture of INGERSOLL Q0150075N5R01 0.594 (15.09 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

INGERSOLL Q0150075N5R01 0.594 (15.09 mm) Square Insert Indexable Drill s|L:D Ratio - 5:1|

ISO: Q0150075N5R01

$665.21
Picture of ISCAR DR1125-3375-125-09-3D-N 1-1/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1125-3375-125-09-3D-N 1-1/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1125-3375-125-09-3D-N

$664.32
Picture of ISCAR DCN 1102-331-125A-3D 1.102" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1102-331-125A-3D 1.102" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1102-331-125A-3D

$664.32
Picture of ISCAR DCN 1102-331-150A-3D 1.102" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1102-331-150A-3D 1.102" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1102-331-150A-3D

$664.32
Picture of ISCAR DR1031-3093-125-09-3D-N 1.031" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1031-3093-125-09-3D-N 1.031" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1031-3093-125-09-3D-N

$664.32
Picture of ISCAR DCN 1063-319-125A-3D 1.063" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1063-319-125A-3D 1.063" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1063-319-125A-3D

$664.32
Picture of ISCAR DCN 1063-319-150A-3D 1.063" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1063-319-150A-3D 1.063" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1063-319-150A-3D

$664.32
Picture of ISCAR DR1187-3561-125-09-3D-N 1.187" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1187-3561-125-09-3D-N 1.187" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1187-3561-125-09-3D-N

$664.32
Picture of ISCAR DR1062-3186-125-09-3D-N 1.062" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1062-3186-125-09-3D-N 1.062" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1062-3186-125-09-3D-N

$664.32
Picture of TUNGALOY TID180R25-12 18mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID180R25-12 18mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID180R25-12

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0709R1000-12 0.709" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0709R1000-12 0.709" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0709R1000-12

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0669R0750-12 0.669" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0669R0750-12 0.669" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0669R0750-12

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID170R20-12 17mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID170R20-12 17mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID170R20-12

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0286086N6R01 1.125 (28.58 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0286086N6R01 1.125 (28.58 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0286086N6R01

$660.67
Picture of INGERSOLL QF0302090N6R01 1.187 (30.15 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0302090N6R01 1.187 (30.15 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0302090N6R01

$660.67
Picture of INGERSOLL QF0262079N6R01 1.031 (26.19 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0262079N6R01 1.031 (26.19 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0262079N6R01

$660.67
Picture of INGERSOLL QF0270081N6R01 1.063 (27.00 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0270081N6R01 1.063 (27.00 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0270081N6R01

$660.67
Picture of INGERSOLL QF0278083N6R01 1.094 (27.79 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0278083N6R01 1.094 (27.79 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0278083N6R01

$660.67
Picture of INGERSOLL QF0294088N6R01 1.156 (29.36 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0294088N6R01 1.156 (29.36 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0294088N6R01

$660.67
Picture of ISCAR DCN 0906-453-125A-5D 0.906" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 0906-453-125A-5D 0.906" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 0906-453-125A-5D

$659.52
Picture of ISCAR DCN 0945-472-125A-5D 0.945" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 0945-472-125A-5D 0.945" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 0945-472-125A-5D

$659.52
Picture of WIDIA/KENNAMETAL TDMX280R3SL32M TDMX Drill BODY D=28MM 3XD SL

WIDIA/KENNAMETAL TDMX280R3SL32M TDMX Drill BODY D=28MM 3XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX290R3SL32M TDMX Drill BODY D=29MM 3XD SL

WIDIA/KENNAMETAL TDMX290R3SL32M TDMX Drill BODY D=29MM 3XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1142R3SL125 TDMX Drill BODY D1.142 3XD SL

WIDIA/KENNAMETAL TDMX1142R3SL125 TDMX Drill BODY D1.142 3XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1103R3SL125 TDMX Drill BODY D1.103 3XD SL

WIDIA/KENNAMETAL TDMX1103R3SL125 TDMX Drill BODY D1.103 3XD SL

Call (262) 251-4020 for pricing
Picture of INGERSOLL TD2200176T5R00 0.8661 (22.000 mm)-0.9016 (22.900 mm) GoldTwist Body

INGERSOLL TD2200176T5R00 0.8661 (22.000 mm)-0.9016 (22.900 mm) GoldTwist Body

ISO: TD2200176T5R00

$657.03
Picture of INGERSOLL TD2100168T5R00 0.8268 (21.000 mm)-0.8622 (21.900 mm) GoldTwist Body

INGERSOLL TD2100168T5R00 0.8268 (21.000 mm)-0.8622 (21.900 mm) GoldTwist Body

ISO: TD2100168T5R00

$657.03
Picture of K-Tool FB-2500-3 Multi Insert Drill 2.500 Cutter Diameter 2.000 Weldon

K-Tool FB-2500-3 Multi Insert Drill 2.500 Cutter Diameter 2.000 Weldon

ANSI: FB-2500-3

ISO: FB-2500-3

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0313R8SS038 TDM1 Drill BODY INCH SS 8XD D=

WIDIA/KENNAMETAL TDM0313R8SS038 TDM1 Drill BODY INCH SS 8XD D=

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0866R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

WIDIA/KENNAMETAL TDM0866R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0294059N6R01 1.156 (29.36 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0294059N6R01 1.156 (29.36 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0294059N6R01

$650.65
Picture of INGERSOLL Q0262052N6R01 1.031 (26.19 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0262052N6R01 1.031 (26.19 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0262052N6R01

$650.65
Picture of INGERSOLL Q0278056N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0278056N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0278056N6R02

$650.65
Picture of INGERSOLL Q0270054N6R01 1.063 (27.00 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0270054N6R01 1.063 (27.00 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0270054N6R01

$650.65
Picture of INGERSOLL Q0302060N6R01 1.187 (30.15 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0302060N6R01 1.187 (30.15 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0302060N6R01

$650.65
Picture of INGERSOLL Q0286057N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0286057N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0286057N6R02

$650.65
Picture of ISCAR DCN 0866-693-100R-8D 0.866" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0866-693-100R-8D 0.866" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0866-693-100R-8D

$649.92
Picture of ISCAR DCN 0827-661-100R-8D 0.827" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0827-661-100R-8D 0.827" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0827-661-100R-8D

$649.92
Picture of TUNGALOY TIDU0748F1000-8 0.748" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0748F1000-8 0.748" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0748F1000-8

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID190F25-8 19mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID190F25-8 19mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID190F25-8

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID220F25-5 22mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID220F25-5 22mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID220F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0787F1000-8 0.787" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0787F1000-8 0.787" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0787F1000-8

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0866F1000-5 0.866" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0866F1000-5 0.866" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0866F1000-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID200F25-8 20mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID200F25-8 20mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID200F25-8

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0827F1000-5 0.827" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0827F1000-5 0.827" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0827F1000-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID210F25-5 21mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID210F25-5 21mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID210F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0709F1000-8 0.709" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0709F1000-8 0.709" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0709F1000-8

Call (262) 251-4020 for pricing
Picture of ISCAR DFN 1378-413-125A-3D-IQ 1.378" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DFN 1378-413-125A-3D-IQ 1.378" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DFN 1378-413-125A-3D-IQ

$648.00
Picture of ISCAR DFN 1299-389-125A-3D-IQ 1.299" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DFN 1299-389-125A-3D-IQ 1.299" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DFN 1299-389-125A-3D-IQ

$648.00
Picture of ISCAR DCN 1220-183-125A-1.5D 1.22" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 1220-183-125A-1.5D 1.22" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 1220-183-125A-1.5D

$648.00
Picture of ISCAR DFN 1339-401-125A-3D-IQ 1.339" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DFN 1339-401-125A-3D-IQ 1.339" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DFN 1339-401-125A-3D-IQ

$648.00
Picture of TUNGALOY TDXU-0562FS-05 0.562" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0562FS-05 0.562" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0562FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0531FS-05 0.531" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0531FS-05 0.531" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0531FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX155F20-5 15.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX155F20-5 15.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX155F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX140F20-5 14mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX140F20-5 14mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX140F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX145F20-5 14.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX145F20-5 14.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX145F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX130F20-5 13mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX130F20-5 13mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX130F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0500FS-05 1/2" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0500FS-05 1/2" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0500FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX150F20-5 15mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX150F20-5 15mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX150F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX135F20-5 13.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX135F20-5 13.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX135F20-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX125F20-5 12.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX125F20-5 12.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX125F20-5

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1142-342-125R-3D 1.142" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 1142-342-125R-3D 1.142" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 1142-342-125R-3D

$647.04
Picture of WIDIA/KENNAMETAL TDMX0906R8SL100 TDMX Drill BODY D.906 8XD SL S

WIDIA/KENNAMETAL TDMX0906R8SL100 TDMX Drill BODY D.906 8XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX230R8SL25M TDMX Drill BODY D=23MM 8XD SL

WIDIA/KENNAMETAL TDMX230R8SL25M TDMX Drill BODY D=23MM 8XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0867R8SL100 TDMX Drill BODY D.867 8XD SL S

WIDIA/KENNAMETAL TDMX0867R8SL100 TDMX Drill BODY D.867 8XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX220R8SL25M TDMX Drill BODY D=22MM 8XD SL

WIDIA/KENNAMETAL TDMX220R8SL25M TDMX Drill BODY D=22MM 8XD SL

Call (262) 251-4020 for pricing
Picture of ISCAR DR0562-2815-075-05-5D-N 0.562" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0562-2815-075-05-5D-N 0.562" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0562-2815-075-05-5D-N

$643.20
Picture of ISCAR DR0578-2894-075-05-5D-N 0.578" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0578-2894-075-05-5D-N 0.578" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0578-2894-075-05-5D-N

$643.20
Picture of ISCAR DR0594-2972-075-05-5D-N 0.594" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISCAR DR0594-2972-075-05-5D-N 0.594" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 5xD

ISO: DR0594-2972-075-05-5D-N

$643.20
Picture of TUNGALOY TDS240F25-3 24mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS240F25-3 24mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS240F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU0937F-3 0.937" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU0937F-3 0.937" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU0937F-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU0875F-3 7/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU0875F-3 7/8" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU0875F-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS230F25-3 23mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS230F25-3 23mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS230F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS250F25-3 25mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS250F25-3 25mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS250F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS239F25-3 23.9mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS239F25-3 23.9mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS239F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS235F25-3 23.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS235F25-3 23.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS235F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS245F25-3 24.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS245F25-3 24.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS245F25-3

Call (262) 251-4020 for pricing
Picture of ISCAR D3N 0906-272-125A-3D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR D3N 0906-272-125A-3D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: D3N 0906-272-125A-3D

$642.24
Picture of ISCAR D3N 0945-283-125A-3D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR D3N 0945-283-125A-3D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: D3N 0945-283-125A-3D

$642.24
Picture of WIDIA/KENNAMETAL TDM0984R5SCF100 TDM1 Drill BODY INCH SCF 5XD D

WIDIA/KENNAMETAL TDM0984R5SCF100 TDM1 Drill BODY INCH SCF 5XD D

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM240R5SCF25M TDM1 SCF Drill BODY 5XD D=24.0

WIDIA/KENNAMETAL TDM240R5SCF25M TDM1 SCF Drill BODY 5XD D=24.0

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0945R5SCF100 TDM1 Drill BODY INCH SCF 5XD D

WIDIA/KENNAMETAL TDM0945R5SCF100 TDM1 Drill BODY INCH SCF 5XD D

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM250R5SCF25M TDM1 SCF Drill BODY 5XD D=25.0

WIDIA/KENNAMETAL TDM250R5SCF25M TDM1 SCF Drill BODY 5XD D=25.0

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0250100JFR00 0.984 (25.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0250100JFR00 0.984 (25.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0250100JFR00

$641.55
Picture of INGERSOLL TD1900228S1R01 0.7480 (19.000 mm)-0.7835 (19.900 mm) GoldTwist Body

INGERSOLL TD1900228S1R01 0.7480 (19.000 mm)-0.7835 (19.900 mm) GoldTwist Body

ISO: TD1900228S1R01

$641.55
Picture of INGERSOLL QR0210084JFR00 0.827 (21.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0210084JFR00 0.827 (21.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0210084JFR00

$641.55
Picture of INGERSOLL QR0206082N5R02 0.813 (20.65 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0206082N5R02 0.813 (20.65 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0206082N5R02

$641.55
Picture of INGERSOLL TD2000240S1R01 0.7874 (20.000 mm)-0.8228 (20.900 mm) GoldTwist Body

INGERSOLL TD2000240S1R01 0.7874 (20.000 mm)-0.8228 (20.900 mm) GoldTwist Body

ISO: TD2000240S1R01

$641.55
Picture of INGERSOLL QR0230092N6R02 0.906 (23.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0230092N6R02 0.906 (23.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0230092N6R02

$641.55