Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ISCAR TGMF 304 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR TGMF 304 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: TGMF 304 IC830

ISO: TGMF 304 IC830

$21.19
Picture of ISCAR GIMY 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 808 IC808

ISO: GIMY 808 IC808

$21.19
Picture of ISCAR TGMF 304 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 304 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 304 IC808

ISO: TGMF 304 IC808

$21.19
Picture of ISCAR TGMF 302 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN

ISCAR TGMF 302 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN

ANSI: TGMF 302 IC908

ISO: TGMF 302 IC908

$21.19
Picture of ISCAR GIMF 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIMF 808 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIMF 808 IC808

ISO: GIMF 808 IC808

$21.19
Picture of TUNGALOY DTI3-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY DTI3-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: DTI3-040 NS9530

ISO: DTI3-040 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR TGMP 506 IC20N Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide

ISCAR TGMP 506 IC20N Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide

ANSI: TGMP 506 IC20N

ISO: TGMP 506 IC20N

$21.11
Picture of ISCAR TAGB 840Y IC807 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAIN + TiN

ISCAR TAGB 840Y IC807 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAIN + TiN

ANSI: TAGB 840Y IC807

ISO: TAGB 840Y IC807

$20.99
Picture of ISCAR TAGB 840Y IC808 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR TAGB 840Y IC808 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: TAGB 840Y IC808

ISO: TAGB 840Y IC808

$20.99
Picture of INGERSOLL TDC4 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDC4 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDC4 K10

ISO: TDC4 K10

$20.77
Picture of INGERSOLL TDXT4E-0.4 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDXT4E-0.4 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDXT4E-0.4 K10

ISO: TDXT4E-0.4 K10

$20.77
Picture of ISCAR TGMF 404 IC428 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TIC + Al2O3

ISCAR TGMF 404 IC428 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TIC + Al2O3

ANSI: TGMF 404 IC428

ISO: TGMF 404 IC428

$20.73
Picture of ISCAR TGMF 402 IC428 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TIC + Al2O3

ISCAR TGMF 402 IC428 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TIC + Al2O3

ANSI: TGMF 402 IC428

ISO: TGMF 402 IC428

$20.73
Picture of ARNO ROUSE SA24E-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24E-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24E-2002N-S1 AP5020

ISO: SA24E-2002N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 302 IC428 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TIC + Al2O3

ISCAR TGMF 302 IC428 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TIC + Al2O3

ANSI: TGMF 302 IC428

ISO: TGMF 302 IC428

$20.26
Picture of ISCAR TGMF 304 IC428 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TIC + Al2O3

ISCAR TGMF 304 IC428 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TIC + Al2O3

ANSI: TGMF 304 IC428

ISO: TGMF 304 IC428

$20.26
Picture of ISCAR GIMY 635-318 IC808 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 635-318 IC808 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 635-318 IC808

ISO: GIMY 635-318 IC808

$20.18
Picture of ISCAR GIMY 630 IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ISCAR GIMY 630 IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ANSI: GIMY 630 IC806

ISO: GIMY 630 IC806

$20.18
Picture of ISCAR GIMY 630 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIMY 630 IC830 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIMY 630 IC830

ISO: GIMY 630 IC830

$20.18
Picture of ISCAR GIMY 630F IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 630F IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 630F IC808

ISO: GIMY 630F IC808

$20.18
Picture of ISCAR GIMY 635-318 IC830 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide AlTiN + TiN

ISCAR GIMY 635-318 IC830 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide AlTiN + TiN

ANSI: GIMY 635-318 IC830

ISO: GIMY 635-318 IC830

$20.18
Picture of ISCAR GIPY 4.00-2.00 IC907 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIPY 4.00-2.00 IC907 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIPY 4.00-2.00 IC907

ISO: GIPY 4.00-2.00 IC907

$20.18
Picture of ISCAR GIMY 420-UN IC8250 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 420-UN IC8250 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 420-UN IC8250

ISO: GIMY 420-UN IC8250

$20.18
Picture of ISCAR GIPY 4.00-2.00 IC804 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ISCAR GIPY 4.00-2.00 IC804 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ANSI: GIPY 4.00-2.00 IC804

ISO: GIPY 4.00-2.00 IC804

$20.18
Picture of ISCAR GIMY 630 IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 630 IC808 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 630 IC808

ISO: GIMY 630 IC808

$20.18
Picture of ISCAR GIPY 4.00-2.00 IC806 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN

ISCAR GIPY 4.00-2.00 IC806 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN

ANSI: GIPY 4.00-2.00 IC806

ISO: GIPY 4.00-2.00 IC806

$20.18
Picture of ISCAR GIMY 630 IC804 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN "SUMO TEC"

ISCAR GIMY 630 IC804 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN "SUMO TEC"

ANSI: GIMY 630 IC804

ISO: GIMY 630 IC804

$20.18
Picture of ISCAR GIMY 630F IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ISCAR GIMY 630F IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ANSI: GIMY 630F IC908

ISO: GIMY 630F IC908

$20.18
Picture of ISCAR GIPY 4.00-2.00 IC320 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN

ISCAR GIPY 4.00-2.00 IC320 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN

ANSI: GIPY 4.00-2.00 IC320

ISO: GIPY 4.00-2.00 IC320

$20.18
Picture of ISCAR GIMY 630 IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ISCAR GIMY 630 IC908 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAlN

ANSI: GIMY 630 IC908

ISO: GIMY 630 IC908

$20.18
Picture of ISCAR GIMY 630F IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ISCAR GIMY 630F IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ANSI: GIMY 630F IC806

ISO: GIMY 630F IC806

$20.18
Picture of INGERSOLL TDT4E-2.0-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiAIN + TiN

INGERSOLL TDT4E-2.0-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiAIN + TiN

ANSI: TDT4E-2.0-RU TT9080

ISO: TDT4E-2.0-RU TT9080

$20.16
Picture of INGERSOLL TDT4E-2.0-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT4E-2.0-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT4E-2.0-RU TT5100

ISO: TDT4E-2.0-RU TT5100

$20.16
Picture of INGERSOLL TDT4E-2.0-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT4E-2.0-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT4E-2.0-RU TT7505

ISO: TDT4E-2.0-RU TT7505

$20.16
Picture of INGERSOLL TDT5E-2.5-RU CT3000 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius

INGERSOLL TDT5E-2.5-RU CT3000 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius

ANSI: TDT5E-2.5-RU CT3000

ISO: TDT5E-2.5-RU CT3000

$20.05
Picture of ISCAR TGMF 635-080 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide

ISCAR TGMF 635-080 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide

ANSI: TGMF 635-080 IC20

ISO: TGMF 635-080 IC20

$19.95
Picture of ARNO ROUSE SA17-4004N-M1 AP2220 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SA17-4004N-M1 AP2220 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ANSI: SA17-4004N-M1 AP2220

ISO: SA17-4004N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-4004N-S1 AM5040 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius AlTiN

ARNO ROUSE SA17-4004N-S1 AM5040 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius AlTiN

ANSI: SA17-4004N-S1 AM5040

ISO: SA17-4004N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-4004N-M1 AP5020 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SA17-4004N-M1 AP5020 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ANSI: SA17-4004N-M1 AP5020

ISO: SA17-4004N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-4004N-T1 AP5020 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SA17-4004N-T1 AP5020 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ANSI: SA17-4004N-T1 AP5020

ISO: SA17-4004N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-4004N-M1 AP2240 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ARNO ROUSE SA17-4004N-M1 AP2240 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius TiCN

ANSI: SA17-4004N-M1 AP2240

ISO: SA17-4004N-M1 AP2240

Call (262) 251-4020 for pricing
Picture of TUNGALOY GR50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.098 Corner Radius 0.197 Wide

TUNGALOY GR50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.098 Corner Radius 0.197 Wide

ANSI: GR50 T9225

ISO: GR50 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY GT50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

TUNGALOY GT50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.197 Wide

ANSI: GT50 T9225

ISO: GT50 T9225

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT3E-1.5-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT3E-1.5-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT3E-1.5-RU TT5100

ISO: TDT3E-1.5-RU TT5100

$19.81
Picture of INGERSOLL TDT3E-1.5-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT3E-1.5-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT3E-1.5-RU TT7505

ISO: TDT3E-1.5-RU TT7505

$19.81
Picture of INGERSOLL TDT3E-1.5-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiAIN + TiN

INGERSOLL TDT3E-1.5-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiAIN + TiN

ANSI: TDT3E-1.5-RU TT9080

ISO: TDT3E-1.5-RU TT9080

$19.81
Picture of INGERSOLL TDT3E-1.5-RU PV3030 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiN

INGERSOLL TDT3E-1.5-RU PV3030 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiN

ANSI: TDT3E-1.5-RU PV3030

ISO: TDT3E-1.5-RU PV3030

$19.81
Picture of ISCAR GIMY 315-UN IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 315-UN IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 315-UN IC8250

ISO: GIMY 315-UN IC8250

$19.80
Picture of TUNGALOY WGE20 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.079 Wide

TUNGALOY WGE20 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.079 Wide

ANSI: WGE20 NS9530

ISO: WGE20 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGE30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide

TUNGALOY WGE30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide

ANSI: WGE30 NS9530

ISO: WGE30 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR GIPY 3.00-1.50 IC806 Cut Off,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ISCAR GIPY 3.00-1.50 IC806 Cut Off,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ANSI: GIPY 3.00-1.50 IC806

ISO: GIPY 3.00-1.50 IC806

$19.72
Picture of ISCAR GIPY 3.00-1.50 IC320 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN

ISCAR GIPY 3.00-1.50 IC320 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN

ANSI: GIPY 3.00-1.50 IC320

ISO: GIPY 3.00-1.50 IC320

$19.72
Picture of ISCAR GIPY 3.00-1.50 IC804 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ISCAR GIPY 3.00-1.50 IC804 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ANSI: GIPY 3.00-1.50 IC804

ISO: GIPY 3.00-1.50 IC804

$19.72
Picture of TUNGALOY GE30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

TUNGALOY GE30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.118 Wide

ANSI: GE30 T9225

ISO: GE30 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 525 IC8250 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 525 IC8250 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 525 IC8250

ISO: GIMY 525 IC8250

$19.64
Picture of ISCAR GIMN 608 IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAIN + TiN

ISCAR GIMN 608 IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAIN + TiN

ANSI: GIMN 608 IC907

ISO: GIMN 608 IC907

$19.41
Picture of ISCAR GIMF 608 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIMF 608 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIMF 608 IC830

ISO: GIMF 608 IC830

$19.41
Picture of ISCAR GIPY 6.00-3.00 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR GIPY 6.00-3.00 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: GIPY 6.00-3.00 IC20

ISO: GIPY 6.00-3.00 IC20

$19.41
Picture of ISCAR GIMT 608 IC806 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN

ISCAR GIMT 608 IC806 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN

ANSI: GIMT 608 IC806

ISO: GIMT 608 IC806

$19.41
Picture of ISCAR GIMT 608 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIMT 608 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIMT 608 IC830

ISO: GIMT 608 IC830

$19.41
Picture of ISCAR GIMF 608 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIMF 608 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIMF 608 IC808

ISO: GIMF 608 IC808

$19.41
Picture of ISCAR GIMF 605 IC830 Grooving,Groove Turning Insert 0.020 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIMF 605 IC830 Grooving,Groove Turning Insert 0.020 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIMF 605 IC830

ISO: GIMF 605 IC830

$19.41
Picture of ISCAR GIMF 608 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN

ISCAR GIMF 608 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN

ANSI: GIMF 608 IC806

ISO: GIMF 608 IC806

$19.41
Picture of ISCAR GIMF 608 IC804 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN "SUMO TEC"

ISCAR GIMF 608 IC804 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide AlTiN "SUMO TEC"

ANSI: GIMF 608 IC804

ISO: GIMF 608 IC804

$19.41
Picture of ISCAR GIMF 605 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ISCAR GIMF 605 IC808 Grooving,Groove Turning Insert 0.020 Corner Radius 0.236 Wide TiAlN + AlTiN + TiN

ANSI: GIMF 605 IC808

ISO: GIMF 605 IC808

$19.41
Picture of ISCAR GIM 6C IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiAlN

ISCAR GIM 6C IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiAlN

ANSI: GIM 6C IC908

ISO: GIM 6C IC908

$19.33
Picture of ISCAR TGMF 525 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ISCAR TGMF 525 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: TGMF 525 IC20

ISO: TGMF 525 IC20

$19.33
Picture of ISCAR GIM 6C IC328 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiCN

ISCAR GIM 6C IC328 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide TiCN

ANSI: GIM 6C IC328

ISO: GIM 6C IC328

$19.33
Picture of INGERSOLL TDC2 K10 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDC2 K10 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDC2 K10

ISO: TDC2 K10

$19.16
Picture of INGERSOLL TDC3 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDC3 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDC3 K10

ISO: TDC3 K10

$19.16
Picture of INGERSOLL TDXU3E-0.3 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDXU3E-0.3 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDXU3E-0.3 K10

ISO: TDXU3E-0.3 K10

$19.16
Picture of TUNGALOY GR40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

TUNGALOY GR40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.078 Corner Radius 0.157 Wide

ANSI: GR40 T9225

ISO: GR40 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 402 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ISCAR TGMF 402 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ANSI: TGMF 402 IC20N

ISO: TGMF 402 IC20N

$19.02
Picture of ISCAR TGMF 404 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ISCAR TGMF 404 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ANSI: TGMF 404 IC20N

ISO: TGMF 404 IC20N

$19.02
Picture of ISCAR TGMF 304 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR TGMF 304 IC20N Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: TGMF 304 IC20N

ISO: TGMF 304 IC20N

$18.87
Picture of ISCAR GIMF 508 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 508 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 508 IC8250

ISO: GIMF 508 IC8250

$18.87
Picture of ISCAR TGMF 302 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR TGMF 302 IC20N Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: TGMF 302 IC20N

ISO: TGMF 302 IC20N

$18.87
Picture of ISCAR GIMF 508 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 508 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 508 IC5010

ISO: GIMF 508 IC5010

$18.87
Picture of TUNGALOY WGR50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

TUNGALOY WGR50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: WGR50 NS9530

ISO: WGR50 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGT50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

TUNGALOY WGT50 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

ANSI: WGT50 NS9530

ISO: WGT50 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 508 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ISCAR TGMF 508 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ANSI: TGMF 508 IC20

ISO: TGMF 508 IC20

$18.64
Picture of ARNO ROUSE SA17-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA17-3003N-M1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA17-3003N-M1 AP5020

ISO: SA17-3003N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA17-3003N-T1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA17-3003N-T1 AP5020

ISO: SA17-3003N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA17-3003N-M1 AP2220 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA17-3003N-M1 AP2220

ISO: SA17-3003N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGT40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

TUNGALOY WGT40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

ANSI: WGT40 NS9530

ISO: WGT40 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY WGR40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.078 Corner Radius 0.157 Wide

TUNGALOY WGR40 NS9530 Clamp Down Grooving,Groove Turning Insert 0.078 Corner Radius 0.157 Wide

ANSI: WGR40 NS9530

ISO: WGR40 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 525F IC808 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 525F IC808 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 525F IC808

ISO: GIMY 525F IC808

$17.94
Picture of ISCAR GIMY 525 IC806 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN

ISCAR GIMY 525 IC806 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN

ANSI: GIMY 525 IC806

ISO: GIMY 525 IC806

$17.94
Picture of ISCAR GIMY 525F IC908 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN

ISCAR GIMY 525F IC908 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN

ANSI: GIMY 525F IC908

ISO: GIMY 525F IC908

$17.94
Picture of ISCAR GIMY 525 IC808 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 525 IC808 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 525 IC808

ISO: GIMY 525 IC808

$17.94
Picture of ISCAR GIMY 525F IC806 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN

ISCAR GIMY 525F IC806 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN

ANSI: GIMY 525F IC806

ISO: GIMY 525F IC806

$17.94
Picture of ISCAR GIMY 525 IC908 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN

ISCAR GIMY 525 IC908 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN

ANSI: GIMY 525 IC908

ISO: GIMY 525 IC908

$17.94
Picture of ISCAR GIMY 525 IC830 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIMY 525 IC830 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIMY 525 IC830

ISO: GIMY 525 IC830

$17.94
Picture of ISCAR GIMY 525 IC804 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN "SUMO TEC"

ISCAR GIMY 525 IC804 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN "SUMO TEC"

ANSI: GIMY 525 IC804

ISO: GIMY 525 IC804

$17.94
Picture of INGERSOLL TDT4E-2.0-RU CT3000 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius

INGERSOLL TDT4E-2.0-RU CT3000 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius

ANSI: TDT4E-2.0-RU CT3000

ISO: TDT4E-2.0-RU CT3000

$17.88
Picture of ISCAR GIMY 630 IC20N Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR GIMY 630 IC20N Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: GIMY 630 IC20N

ISO: GIMY 630 IC20N

$17.63
Picture of INGERSOLL TDT3E-1.5-RU CT3000 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius

INGERSOLL TDT3E-1.5-RU CT3000 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius

ANSI: TDT3E-1.5-RU CT3000

ISO: TDT3E-1.5-RU CT3000

$17.48
Picture of ISCAR TGMF 420 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR TGMF 420 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: TGMF 420 IC20

ISO: TGMF 420 IC20

$17.48
Picture of INGERSOLL RDC3 TT7220 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL RDC3 TT7220 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: RDC3 TT7220

ISO: RDC3 TT7220

$17.44
Picture of INGERSOLL RDC2 TT8020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

INGERSOLL RDC2 TT8020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: RDC2 TT8020

ISO: RDC2 TT8020

$17.44
Picture of INGERSOLL RDJ2 TT9080 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL RDJ2 TT9080 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: RDJ2 TT9080

ISO: RDJ2 TT9080

$17.44
Picture of INGERSOLL RDJ3 TT9080 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL RDJ3 TT9080 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: RDJ3 TT9080

ISO: RDJ3 TT9080

$17.44
Picture of INGERSOLL RDC2 TT7220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

INGERSOLL RDC2 TT7220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: RDC2 TT7220

ISO: RDC2 TT7220

$17.44
Picture of INGERSOLL RDC3 TT9080 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL RDC3 TT9080 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: RDC3 TT9080

ISO: RDC3 TT9080

$17.44
Picture of INGERSOLL RDC2 TT9080 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL RDC2 TT9080 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: RDC2 TT9080

ISO: RDC2 TT9080

$17.44
Picture of INGERSOLL RDC3 TT8020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL RDC3 TT8020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: RDC3 TT8020

ISO: RDC3 TT8020

$17.44
Picture of INGERSOLL RDJ3 TT8020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL RDJ3 TT8020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: RDJ3 TT8020

ISO: RDJ3 TT8020

$17.44
Picture of INGERSOLL RDJ2 TT8020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

INGERSOLL RDJ2 TT8020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: RDJ2 TT8020

ISO: RDJ2 TT8020

$17.44
Picture of ISCAR GIPY 5.00-2.50 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ISCAR GIPY 5.00-2.50 IC20 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: GIPY 5.00-2.50 IC20

ISO: GIPY 5.00-2.50 IC20

$17.32
Picture of ISCAR GIMF 508 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIMF 508 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIMF 508 IC830

ISO: GIMF 508 IC830

$17.17
Picture of ISCAR GIMF 508 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIMF 508 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIMF 508 IC808

ISO: GIMF 508 IC808

$17.17
Picture of ISCAR GIMY 315 IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 315 IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 315 IC8250

ISO: GIMY 315 IC8250

$17.17
Picture of ISCAR GIMF 508 IC328 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN

ISCAR GIMF 508 IC328 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN

ANSI: GIMF 508 IC328

ISO: GIMF 508 IC328

$17.17
Picture of ISCAR GIMF 508 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN

ISCAR GIMF 508 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN

ANSI: GIMF 508 IC806

ISO: GIMF 508 IC806

$17.17
Picture of ISCAR GIMT 508 IC806 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN

ISCAR GIMT 508 IC806 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN

ANSI: GIMT 508 IC806

ISO: GIMT 508 IC806

$17.17
Picture of ISCAR GIMT 508 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIMT 508 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIMT 508 IC808

ISO: GIMT 508 IC808

$17.17
Picture of ISCAR GIMN 508 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN

ISCAR GIMN 508 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN

ANSI: GIMN 508 IC908

ISO: GIMN 508 IC908

$17.17
Picture of ISCAR GIMF 508 IC804 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN "SUMO TEC"

ISCAR GIMF 508 IC804 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN "SUMO TEC"

ANSI: GIMF 508 IC804

ISO: GIMF 508 IC804

$17.17
Picture of ISCAR GIMN 508 IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAIN + TiN

ISCAR GIMN 508 IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAIN + TiN

ANSI: GIMN 508 IC907

ISO: GIMN 508 IC907

$17.17
Picture of ISCAR GIMT 508 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIMT 508 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIMT 508 IC830

ISO: GIMT 508 IC830

$17.17
Picture of ISCAR GIM 4.6UT IC328 Grooving,Groove Turning Insert 0.024 Corner Radius 0.181 Wide TiCN

ISCAR GIM 4.6UT IC328 Grooving,Groove Turning Insert 0.024 Corner Radius 0.181 Wide TiCN

ANSI: GIM 4.6UT IC328

ISO: GIM 4.6UT IC328

$17.09
Picture of ISCAR GDMW 2.4 IC20 Grooving,Groove Turning Insert 0.007 Corner Radius 0.094 Wide

ISCAR GDMW 2.4 IC20 Grooving,Groove Turning Insert 0.007 Corner Radius 0.094 Wide

ANSI: GDMW 2.4 IC20

ISO: GDMW 2.4 IC20

$17.01
Picture of ISCAR TGMF 315 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR TGMF 315 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: TGMF 315 IC20

ISO: TGMF 315 IC20

$16.94
Picture of ISCAR GIMY 840 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIMY 840 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIMY 840 IC20

ISO: GIMY 840 IC20

$16.94
Picture of ISCAR GIMF 406 IC8250 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 406 IC8250 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 406 IC8250

ISO: GIMF 406 IC8250

$16.86
Picture of ISCAR GIMF 406 IC5010 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 406 IC5010 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 406 IC5010

ISO: GIMF 406 IC5010

$16.86
Picture of ISCAR TGMF 402 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ISCAR TGMF 402 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide

ANSI: TGMF 402 IC20

ISO: TGMF 402 IC20

$16.63
Picture of ISCAR TGMF 404 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ISCAR TGMF 404 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide

ANSI: TGMF 404 IC20

ISO: TGMF 404 IC20

$16.63
Picture of TUNGALOY WGT30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY WGT30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: WGT30 NS9530

ISO: WGT30 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR GIMF 508 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TIC + Al2O3

ISCAR GIMF 508 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TIC + Al2O3

ANSI: GIMF 508 IC428

ISO: GIMF 508 IC428

$16.39
Picture of ISCAR GIMY 304 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR GIMY 304 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: GIMY 304 IC830

ISO: GIMY 304 IC830

$16.39
Picture of ISCAR GIMY 304 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 304 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 304 IC8250

ISO: GIMY 304 IC8250

$16.39
Picture of ISCAR GIMY 808 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide

ISCAR GIMY 808 IC20 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide

ANSI: GIMY 808 IC20

ISO: GIMY 808 IC20

$16.32
Picture of ISCAR TGMF 302 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR TGMF 302 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: TGMF 302 IC20

ISO: TGMF 302 IC20

$16.24
Picture of ISCAR TGMF 304 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR TGMF 304 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: TGMF 304 IC20

ISO: TGMF 304 IC20

$16.24
Picture of ISCAR TAG N4HF IC808 Grooving,Groove Turning Insert 0.019 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR TAG N4HF IC808 Grooving,Groove Turning Insert 0.019 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: TAG N4HF IC808

ISO: TAG N4HF IC808

$16.11
Picture of ISCAR TAG N4HF IC830 Grooving,Groove Turning Insert 0.019 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR TAG N4HF IC830 Grooving,Groove Turning Insert 0.019 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: TAG N4HF IC830

ISO: TAG N4HF IC830

$16.11
Picture of ISCAR GIMY 420 IC908 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN

ISCAR GIMY 420 IC908 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN

ANSI: GIMY 420 IC908

ISO: GIMY 420 IC908

$16.09
Picture of ISCAR GIMY 420F IC908 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN

ISCAR GIMY 420F IC908 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN

ANSI: GIMY 420F IC908

ISO: GIMY 420F IC908

$16.09
Picture of ISCAR GIMY 420 IC830 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIMY 420 IC830 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIMY 420 IC830

ISO: GIMY 420 IC830

$16.09
Picture of ISCAR GIMY 420 IC804 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ISCAR GIMY 420 IC804 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ANSI: GIMY 420 IC804

ISO: GIMY 420 IC804

$16.09
Picture of ISCAR GIMY 420 IC806 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN

ISCAR GIMY 420 IC806 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN

ANSI: GIMY 420 IC806

ISO: GIMY 420 IC806

$16.09
Picture of ISCAR GIMY 420 IC808 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 420 IC808 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 420 IC808

ISO: GIMY 420 IC808

$16.09
Picture of TUNGALOY WGR30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

TUNGALOY WGR30 NS9530 Clamp Down Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: WGR30 NS9530

ISO: WGR30 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 525 IC20N Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ISCAR GIMY 525 IC20N Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: GIMY 525 IC20N

ISO: GIMY 525 IC20N

$15.93
Picture of ISCAR GIMY 315 IC908 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN

ISCAR GIMY 315 IC908 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN

ANSI: GIMY 315 IC908

ISO: GIMY 315 IC908

$15.62
Picture of ISCAR GIMY 315 IC804 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ISCAR GIMY 315 IC804 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN "SUMO TEC"

ANSI: GIMY 315 IC804

ISO: GIMY 315 IC804

$15.62
Picture of ISCAR GIMY 315F IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 315F IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 315F IC808

ISO: GIMY 315F IC808

$15.62
Picture of ISCAR GIMY 315 IC830 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR GIMY 315 IC830 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: GIMY 315 IC830

ISO: GIMY 315 IC830

$15.62
Picture of ISCAR GIMY 315 IC806 Cut Off,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ISCAR GIMY 315 IC806 Cut Off,Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN

ANSI: GIMY 315 IC806

ISO: GIMY 315 IC806

$15.62
Picture of ISCAR GIMY 315F IC908 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN

ISCAR GIMY 315F IC908 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN

ANSI: GIMY 315F IC908

ISO: GIMY 315F IC908

$15.62
Picture of ISCAR GIMY 315 IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 315 IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 315 IC808

ISO: GIMY 315 IC808

$15.62
Picture of TUNGALOY GE50 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.197 Wide

TUNGALOY GE50 NS9530 Press In Grooving,Groove Turning Insert 0.007 Corner Radius 0.197 Wide

ANSI: GE50 NS9530

ISO: GE50 NS9530

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT4E-2.0-RU K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDT4E-2.0-RU K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDT4E-2.0-RU K10

ISO: TDT4E-2.0-RU K10

$15.52
Picture of ISCAR GDP 1.55-0.30-1404Q IC908 Grooving,Groove Turning Insert 0.012 Corner Radius 0.061 Wide TiAlN

ISCAR GDP 1.55-0.30-1404Q IC908 Grooving,Groove Turning Insert 0.012 Corner Radius 0.061 Wide TiAlN

ANSI: GDP 1.55-0.30-1404Q IC908

ISO: GDP 1.55-0.30-1404Q IC908

$15.47
Picture of ISCAR GIPY 4.00-2.00 IC4 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR GIPY 4.00-2.00 IC4 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: GIPY 4.00-2.00 IC4

ISO: GIPY 4.00-2.00 IC4

$15.39
Picture of ISCAR GIPY 4.00-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ISCAR GIPY 4.00-2.00 IC20 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide

ANSI: GIPY 4.00-2.00 IC20

ISO: GIPY 4.00-2.00 IC20

$15.39
Picture of ISCAR GIMF 406 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIMF 406 IC830 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIMF 406 IC830

ISO: GIMF 406 IC830

$15.31
Picture of ISCAR GIMN 406 IC907 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIMN 406 IC907 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIMN 406 IC907

ISO: GIMN 406 IC907

$15.31
Picture of ISCAR GIMF 406 IC808 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIMF 406 IC808 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIMF 406 IC808

ISO: GIMF 406 IC808

$15.31
Picture of ISCAR GIMF 406 IC806 Cut Off,Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN

ISCAR GIMF 406 IC806 Cut Off,Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN

ANSI: GIMF 406 IC806

ISO: GIMF 406 IC806

$15.31
Picture of ISCAR GIMF 406 IC907 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAIN + TiN

ISCAR GIMF 406 IC907 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAIN + TiN

ANSI: GIMF 406 IC907

ISO: GIMF 406 IC907

$15.31
Picture of ISCAR GIMY 635-318 IC20 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide

ISCAR GIMY 635-318 IC20 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide

ANSI: GIMY 635-318 IC20

ISO: GIMY 635-318 IC20

$15.31
Picture of ISCAR GIMT 402 IC806 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN

ISCAR GIMT 402 IC806 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN

ANSI: GIMT 402 IC806

ISO: GIMT 402 IC806

$15.31
Picture of ISCAR GIMT 402 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIMT 402 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIMT 402 IC830

ISO: GIMT 402 IC830

$15.31
Picture of ISCAR GIMF 406 IC804 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ISCAR GIMF 406 IC804 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide AlTiN "SUMO TEC"

ANSI: GIMF 406 IC804

ISO: GIMF 406 IC804

$15.31
Picture of ISCAR GIMIY 404 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIMIY 404 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIMIY 404 IC808

ISO: GIMIY 404 IC808

$15.31
Picture of ISCAR GIMIY 404 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIMIY 404 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIMIY 404 IC830

ISO: GIMIY 404 IC830

$15.31
Picture of ISCAR GIMF 406 IC328 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN

ISCAR GIMF 406 IC328 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiCN

ANSI: GIMF 406 IC328

ISO: GIMF 406 IC328

$15.31
Picture of ISCAR GIMF 406 IC908 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAlN

ISCAR GIMF 406 IC908 Grooving,Groove Turning Insert 0.024 Corner Radius 0.157 Wide TiAlN

ANSI: GIMF 406 IC908

ISO: GIMF 406 IC908

$15.31
Picture of ISCAR GIMY 630 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR GIMY 630 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: GIMY 630 IC20

ISO: GIMY 630 IC20

$15.31
Picture of ISCAR GIMT 402 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR GIMT 402 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: GIMT 402 IC808

ISO: GIMT 402 IC808

$15.31
Picture of ISCAR GIMT 404 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR GIMT 404 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: GIMT 404 IC830

ISO: GIMT 404 IC830

$15.31
Picture of ISCAR GIMT 404 IC806 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ISCAR GIMT 404 IC806 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN

ANSI: GIMT 404 IC806

ISO: GIMT 404 IC806

$15.31
Picture of ISCAR GIM 4C IC908 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiAlN

ISCAR GIM 4C IC908 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiAlN

ANSI: GIM 4C IC908

ISO: GIM 4C IC908

$15.23
Picture of ISCAR GIM 4-8RA IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiCN

ISCAR GIM 4-8RA IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiCN

ANSI: GIM 4-8RA IC328

ISO: GIM 4-8RA IC328

$15.23
Picture of ISCAR GIM 4-8RA IC354 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiCN

ISCAR GIM 4-8RA IC354 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiCN

ANSI: GIM 4-8RA IC354

ISO: GIM 4-8RA IC354

$15.23
Picture of ISCAR GIM 4J IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiCN

ISCAR GIM 4J IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiCN

ANSI: GIM 4J IC328

ISO: GIM 4J IC328

$15.23
Picture of ISCAR GIM 4 IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiCN

ISCAR GIM 4 IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.157 Wide TiCN

ANSI: GIM 4 IC328

ISO: GIM 4 IC328

$15.23
Picture of ISCAR GIMT 304 IC806 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN

ISCAR GIMT 304 IC806 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN

ANSI: GIMT 304 IC806

ISO: GIMT 304 IC806

$15.00
Picture of ISCAR GIMT 302 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR GIMT 302 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: GIMT 302 IC830

ISO: GIMT 302 IC830

$15.00
Picture of ISCAR GIM 3-4LA IC354 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN

ISCAR GIM 3-4LA IC354 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN

ANSI: GIM 3-4LA IC354

ISO: GIM 3-4LA IC354

$15.00
Picture of ISCAR GIMY 304 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN

ISCAR GIMY 304 IC806 Cut Off,Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN

ANSI: GIMY 304 IC806

ISO: GIMY 304 IC806

$15.00
Picture of ISCAR GIM 3.2-8RA IC354 Grooving,Groove Turning Insert 0.009 Corner Radius 0.126 Wide TiCN

ISCAR GIM 3.2-8RA IC354 Grooving,Groove Turning Insert 0.009 Corner Radius 0.126 Wide TiCN

ANSI: GIM 3.2-8RA IC354

ISO: GIM 3.2-8RA IC354

$15.00
Picture of ISCAR GIMT 302 IC806 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN

ISCAR GIMT 302 IC806 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN

ANSI: GIMT 302 IC806

ISO: GIMT 302 IC806

$15.00
Picture of ISCAR GIPY 3.00-1.50 IC4 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GIPY 3.00-1.50 IC4 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GIPY 3.00-1.50 IC4

ISO: GIPY 3.00-1.50 IC4

$15.00
Picture of ISCAR GIM 3-4RA IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ISCAR GIM 3-4RA IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ANSI: GIM 3-4RA IC328

ISO: GIM 3-4RA IC328

$15.00
Picture of ISCAR GIM 3.2 IC328 Grooving,Groove Turning Insert 0.009 Corner Radius 0.126 Wide TiCN

ISCAR GIM 3.2 IC328 Grooving,Groove Turning Insert 0.009 Corner Radius 0.126 Wide TiCN

ANSI: GIM 3.2 IC328

ISO: GIM 3.2 IC328

$15.00
Picture of ISCAR GIMT 302 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIMT 302 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIMT 302 IC808

ISO: GIMT 302 IC808

$15.00
Picture of ISCAR GIMN 302 IC907 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAIN + TiN

ISCAR GIMN 302 IC907 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAIN + TiN

ANSI: GIMN 302 IC907

ISO: GIMN 302 IC907

$15.00
Picture of ISCAR GIM 3J IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ISCAR GIM 3J IC328 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ANSI: GIM 3J IC328

ISO: GIM 3J IC328

$15.00
Picture of ISCAR GIM 3J-4LA IC354 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ISCAR GIM 3J-4LA IC354 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ANSI: GIM 3J-4LA IC354

ISO: GIM 3J-4LA IC354

$15.00
Picture of ISCAR GIM 3JS-15RA IC328 Grooving,Groove Turning Insert 0.001 Corner Radius 0.118 Wide TiCN

ISCAR GIM 3JS-15RA IC328 Grooving,Groove Turning Insert 0.001 Corner Radius 0.118 Wide TiCN

ANSI: GIM 3JS-15RA IC328

ISO: GIM 3JS-15RA IC328

$15.00
Picture of ISCAR GIM 3J-8RA IC354 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ISCAR GIM 3J-8RA IC354 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ANSI: GIM 3J-8RA IC354

ISO: GIM 3J-8RA IC354

$15.00
Picture of ISCAR GIM 3-8RA IC354 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ISCAR GIM 3-8RA IC354 Grooving,Groove Turning Insert 0.010 Corner Radius 0.118 Wide TiCN

ANSI: GIM 3-8RA IC354

ISO: GIM 3-8RA IC354

$15.00
Picture of ISCAR GIMT 304 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIMT 304 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIMT 304 IC808

ISO: GIMT 304 IC808

$15.00
Picture of ISCAR GIMIY 304 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GIMIY 304 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GIMIY 304 IC808

ISO: GIMIY 304 IC808

$15.00
Picture of ISCAR GIM 3.2-4LA IC354 Grooving,Groove Turning Insert 0.009 Corner Radius 0.126 Wide TiCN

ISCAR GIM 3.2-4LA IC354 Grooving,Groove Turning Insert 0.009 Corner Radius 0.126 Wide TiCN

ANSI: GIM 3.2-4LA IC354

ISO: GIM 3.2-4LA IC354

$15.00
Picture of ISCAR GIPY 3.00-1.50 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GIPY 3.00-1.50 IC20 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GIPY 3.00-1.50 IC20

ISO: GIPY 3.00-1.50 IC20

$15.00
Picture of ISCAR GIMT 304 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR GIMT 304 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: GIMT 304 IC830

ISO: GIMT 304 IC830

$15.00