Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of INGERSOLL TDT6E-3.0-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT6E-3.0-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT6E-3.0-RU TT7505

ISO: TDT6E-3.0-RU TT7505

$25.41
Picture of INGERSOLL TDT6E-3.0-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius TiAIN + TiN

INGERSOLL TDT6E-3.0-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius TiAIN + TiN

ANSI: TDT6E-3.0-RU TT9080

ISO: TDT6E-3.0-RU TT9080

$25.41
Picture of ISCAR GIPI 2.39-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide

ISCAR GIPI 2.39-1.20 IC20 Grooving,Groove Turning Insert 0.047 Corner Radius 0.094 Wide

ANSI: GIPI 2.39-1.20 IC20

ISO: GIPI 2.39-1.20 IC20

$25.21
Picture of ISCAR GIPY 6.00-3.00 IC907 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAIN + TiN

ISCAR GIPY 6.00-3.00 IC907 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiAIN + TiN

ANSI: GIPY 6.00-3.00 IC907

ISO: GIPY 6.00-3.00 IC907

$25.21
Picture of ISCAR GIPY 6.00-3.00 IC320 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiCN

ISCAR GIPY 6.00-3.00 IC320 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide TiCN

ANSI: GIPY 6.00-3.00 IC320

ISO: GIPY 6.00-3.00 IC320

$25.21
Picture of ISCAR GIPY 6.00-3.00 IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ISCAR GIPY 6.00-3.00 IC806 Cut Off,Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide AlTiN

ANSI: GIPY 6.00-3.00 IC806

ISO: GIPY 6.00-3.00 IC806

$25.21
Picture of ARNO ROUSE SA24-3003R-M1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ARNO ROUSE SA24-3003R-M1 AM5040 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN

ANSI: SA24-3003R-M1 AM5040

ISO: SA24-3003R-M1 AM5040

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR5-250 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR5-250 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: DTR5-250 NS9530

ISO: DTR5-250 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR GIP 3.00-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR GIP 3.00-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: GIP 3.00-0.20 IC20

ISO: GIP 3.00-0.20 IC20

$25.13
Picture of ISCAR TGMF 525 IC830 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR TGMF 525 IC830 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: TGMF 525 IC830

ISO: TGMF 525 IC830

$25.13
Picture of ISCAR GEPI 3.18-1.59 IC08 Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide

ISCAR GEPI 3.18-1.59 IC08 Grooving,Groove Turning Insert 0.063 Corner Radius 0.125 Wide

ANSI: GEPI 3.18-1.59 IC08

ISO: GEPI 3.18-1.59 IC08

$25.13
Picture of ISCAR GIPI 2.50-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide

ISCAR GIPI 2.50-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide

ANSI: GIPI 2.50-0.20 IC20

ISO: GIPI 2.50-0.20 IC20

$25.13
Picture of ISCAR TGMF 525 IC808 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 525 IC808 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 525 IC808

ISO: TGMF 525 IC808

$25.13
Picture of ISCAR GIPI 2.70-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide

ISCAR GIPI 2.70-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.106 Wide

ANSI: GIPI 2.70-0.10 IC20

ISO: GIPI 2.70-0.10 IC20

$25.13
Picture of ISCAR GIPI 3.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR GIPI 3.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: GIPI 3.00E-0.40 IC20

ISO: GIPI 3.00E-0.40 IC20

$25.13
Picture of ISCAR GIPI 3.30-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide

ISCAR GIPI 3.30-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.130 Wide

ANSI: GIPI 3.30-0.10 IC20

ISO: GIPI 3.30-0.10 IC20

$25.13
Picture of ISCAR GIPI 3.18-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide

ISCAR GIPI 3.18-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.125 Wide

ANSI: GIPI 3.18-0.20 IC20

ISO: GIPI 3.18-0.20 IC20

$25.13
Picture of ISCAR GIPI 3.00-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR GIPI 3.00-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: GIPI 3.00-0.40 IC20

ISO: GIPI 3.00-0.40 IC20

$25.13
Picture of ISCAR TGMF 525 IC908 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN

ISCAR TGMF 525 IC908 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN

ANSI: TGMF 525 IC908

ISO: TGMF 525 IC908

$25.13
Picture of ISCAR GEPI 3.00-1.50 IC08 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ISCAR GEPI 3.00-1.50 IC08 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: GEPI 3.00-1.50 IC08

ISO: GEPI 3.00-1.50 IC08

$25.13
Picture of ISCAR GIP 3.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ISCAR GIP 3.00E-0.40 IC20 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide

ANSI: GIP 3.00E-0.40 IC20

ISO: GIP 3.00E-0.40 IC20

$25.13
Picture of ISCAR GFQR 12-2.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.079 Wide TiCN + TiN

ISCAR GFQR 12-2.00-0.20 IC528 Grooving,Groove Turning Insert 0.008 Corner Radius 0.079 Wide TiCN + TiN

ANSI: GFQR 12-2.00-0.20 IC528

ISO: GFQR 12-2.00-0.20 IC528

$24.98
Picture of INGERSOLL TDC3 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL TDC3 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: TDC3 TT7220

ISO: TDC3 TT7220

$24.96
Picture of INGERSOLL TDC2 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiCN

INGERSOLL TDC2 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: TDC2 TT8020

ISO: TDC2 TT8020

$24.96
Picture of INGERSOLL TDC3 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

INGERSOLL TDC3 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: TDC3 TT8020

ISO: TDC3 TT8020

$24.96
Picture of INGERSOLL TDXU3E-0.3 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

INGERSOLL TDXU3E-0.3 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: TDXU3E-0.3 TT7220

ISO: TDXU3E-0.3 TT7220

$24.96
Picture of INGERSOLL TDXU3E-0.3 TT6080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN + TiN

INGERSOLL TDXU3E-0.3 TT6080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius AlTiN + TiN

ANSI: TDXU3E-0.3 TT6080

ISO: TDXU3E-0.3 TT6080

$24.96
Picture of INGERSOLL TDXU3E-0.3 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDXU3E-0.3 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDXU3E-0.3 TT5100

ISO: TDXU3E-0.3 TT5100

$24.96
Picture of INGERSOLL TDXU3E-0.3 TT7505 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDXU3E-0.3 TT7505 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDXU3E-0.3 TT7505

ISO: TDXU3E-0.3 TT7505

$24.96
Picture of INGERSOLL TDXU3E-0.3 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiAIN + TiN

INGERSOLL TDXU3E-0.3 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiAIN + TiN

ANSI: TDXU3E-0.3 TT9080

ISO: TDXU3E-0.3 TT9080

$24.96
Picture of INGERSOLL TDC3 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDC3 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDC3 TT5100

ISO: TDC3 TT5100

$24.96
Picture of INGERSOLL TDC3 PV3030 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiN

INGERSOLL TDC3 PV3030 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiN

ANSI: TDC3 PV3030

ISO: TDC3 PV3030

$24.96
Picture of INGERSOLL TDXU3E-0.3 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

INGERSOLL TDXU3E-0.3 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: TDXU3E-0.3 TT8020

ISO: TDXU3E-0.3 TT8020

$24.96
Picture of INGERSOLL TDC2 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiAIN + TiN

INGERSOLL TDC2 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiAIN + TiN

ANSI: TDC2 TT9080

ISO: TDC2 TT9080

$24.96
Picture of INGERSOLL TDXU3E-0.3 PV3030 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiN

INGERSOLL TDXU3E-0.3 PV3030 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiN

ANSI: TDXU3E-0.3 PV3030

ISO: TDXU3E-0.3 PV3030

$24.96
Picture of INGERSOLL TDC3 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL TDC3 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: TDC3 TT9080

ISO: TDC3 TT9080

$24.96
Picture of INGERSOLL TDC3.18 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.125 Wide 0.008 Corner Radius TiAIN + TiN

INGERSOLL TDC3.18 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.125 Wide 0.008 Corner Radius TiAIN + TiN

ANSI: TDC3.18 TT9080

ISO: TDC3.18 TT9080

$24.96
Picture of INGERSOLL TDC2 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiCN

INGERSOLL TDC2 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: TDC2 TT7220

ISO: TDC2 TT7220

$24.96
Picture of INGERSOLL TDC3.18 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.125 Wide 0.008 Corner Radius TiCN

INGERSOLL TDC3.18 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.125 Wide 0.008 Corner Radius TiCN

ANSI: TDC3.18 TT8020

ISO: TDC3.18 TT8020

$24.96
Picture of TUNGALOY ETX5-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.197 Wide

TUNGALOY ETX5-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.197 Wide

ANSI: ETX5-040 AH725

ISO: ETX5-040 AH725

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 420 IC5010 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 420 IC5010 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 420 IC5010

ISO: TGMF 420 IC5010

$24.75
Picture of ISCAR TGMF 420 IC8250 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 420 IC8250 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 420 IC8250

ISO: TGMF 420 IC8250

$24.75
Picture of ARNO ROUSE SA24-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-T1 AP5020

ISO: SA24-2002N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-T1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-T1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-T1 AP2220

ISO: SA24-2002N-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-2002N-M3 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-2002N-M3 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SE24-2002N-M3 AP5020

ISO: SE24-2002N-M3 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-S1 AP5030 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-S1 AP5030 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-S1 AP5030

ISO: SA24-2002N-S1 AP5030

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-2002N-S1 AM5040

ISO: SA24-2002N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-2002N-M2 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SE24-2002N-M2 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SE24-2002N-M2 AM5040

ISO: SE24-2002N-M2 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-M1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-M1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-M1 AP2220

ISO: SA24-2002N-M1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-F1 AP2220

ISO: SA24-2002N-F1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2001R-S1-12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA24-2001R-S1-12 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius TiCN

ANSI: SA24-2001R-S1-12 AP5020

ISO: SA24-2001R-S1-12 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-M1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-M1 AP5020

ISO: SA24-2002N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-F1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-F1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-F1 AP5020

ISO: SA24-2002N-F1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-2002N-M2 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-2002N-M2 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SE24-2002N-M2 AP5020

ISO: SE24-2002N-M2 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002N-S1 AP5020

ISO: SA24-2002N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SE24-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SE24-2002N-T1 AP5020

ISO: SE24-2002N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GEMI 3015Y IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GEMI 3015Y IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GEMI 3015Y IC808

ISO: GEMI 3015Y IC808

$24.67
Picture of ISCAR TGMF 635-080 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TIC + Al2O3

ISCAR TGMF 635-080 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide TIC + Al2O3

ANSI: TGMF 635-080 IC428

ISO: TGMF 635-080 IC428

$24.51
Picture of INGERSOLL TDC6 K10 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDC6 K10 Face Grooving,Grooving,Groove Turning Insert 0.236 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDC6 K10

ISO: TDC6 K10

$24.41
Picture of ISCAR GEPI 2.00-1.00 IC08 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide

ISCAR GEPI 2.00-1.00 IC08 Grooving,Groove Turning Insert 0.039 Corner Radius 0.079 Wide

ANSI: GEPI 2.00-1.00 IC08

ISO: GEPI 2.00-1.00 IC08

$24.36
Picture of ISCAR TAGB 1008Y IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide TiAlN + AlTiN + TiN

ISCAR TAGB 1008Y IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.394 Wide TiAlN + AlTiN + TiN

ANSI: TAGB 1008Y IC808

ISO: TAGB 1008Y IC808

$24.31
Picture of INGERSOLL TDA4.00-2.00 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDA4.00-2.00 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDA4.00-2.00 K10

ISO: TDA4.00 2.00 K10

$24.31
Picture of INGERSOLL TDA3.00-1.50 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDA3.00-1.50 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.059 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDA3.00-1.50 K10

ISO: TDA3.00 1.50 K10

$24.31
Picture of ISCAR GIPI 2.22-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide

ISCAR GIPI 2.22-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide

ANSI: GIPI 2.22-0.10 IC20

ISO: GIPI 2.22-0.10 IC20

$24.28
Picture of ISCAR TGMF 508 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN

ISCAR TGMF 508 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN

ANSI: TGMF 508 IC908

ISO: TGMF 508 IC908

$24.28
Picture of ISCAR GIPI 2.39-0.15 IC20 Grooving,Groove Turning Insert 0.006 Corner Radius 0.094 Wide

ISCAR GIPI 2.39-0.15 IC20 Grooving,Groove Turning Insert 0.006 Corner Radius 0.094 Wide

ANSI: GIPI 2.39-0.15 IC20

ISO: GIPI 2.39-0.15 IC20

$24.28
Picture of ISCAR GIG 2.00-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.079 Wide

ISCAR GIG 2.00-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.079 Wide

ANSI: GIG 2.00-0.20 IC20

ISO: GIG 2.00-0.20 IC20

$24.28
Picture of ISCAR TGMP 506 IC9015 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR TGMP 506 IC9015 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: TGMP 506 IC9015

ISO: TGMP 506 IC9015

$24.28
Picture of ISCAR GIPI 1.78-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.070 Wide

ISCAR GIPI 1.78-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.070 Wide

ANSI: GIPI 1.78-0.10 IC20

ISO: GIPI 1.78-0.10 IC20

$24.28
Picture of ISCAR TGMF 508 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 508 IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 508 IC808

ISO: TGMF 508 IC808

$24.28
Picture of ISCAR GIPI 1.96-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide

ISCAR GIPI 1.96-0.10 IC20 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide

ANSI: GIPI 1.96-0.10 IC20

ISO: GIPI 1.96-0.10 IC20

$24.28
Picture of ISCAR GIPI 1.57-0.15 IC20 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide

ISCAR GIPI 1.57-0.15 IC20 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide

ANSI: GIPI 1.57-0.15 IC20

ISO: GIPI 1.57-0.15 IC20

$24.28
Picture of ISCAR TGMF 508 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR TGMF 508 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: TGMF 508 IC830

ISO: TGMF 508 IC830

$24.28
Picture of ISCAR GIPI 2.30-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.091 Wide

ISCAR GIPI 2.30-0.20 IC20 Grooving,Groove Turning Insert 0.008 Corner Radius 0.091 Wide

ANSI: GIPI 2.30-0.20 IC20

ISO: GIPI 2.30-0.20 IC20

$24.28
Picture of ISCAR GIPI 1.70-0.00 IC20 Grooving,Groove Turning Insert 0.067 Wide

ISCAR GIPI 1.70-0.00 IC20 Grooving,Groove Turning Insert 0.067 Wide

ANSI: GIPI 1.70-0.00 IC20

ISO: GIPI 1.70-0.00 IC20

$24.28
Picture of ARNO ROUSE SA16-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA16-2002N-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA16-2002N-T1 AP5020

ISO: SA16-2002N-T1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-2002N-F1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA16-2002N-F1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA16-2002N-F1 AP5020

ISO: SA16-2002N-F1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-2002N-T1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA16-2002N-T1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA16-2002N-T1 AP2220

ISO: SA16-2002N-T1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA16-2002N-F1 AP2220 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA16-2002N-F1 AP2220

ISO: SA16-2002N-F1 AP2220

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA16-2002N-S1 AM5040 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius AlTiN

ANSI: SA16-2002N-S1 AM5040

ISO: SA16-2002N-S1 AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA16-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA16-2002N-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA16-2002N-S1 AP5020

ISO: SA16-2002N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GIMY 840 IC8250 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 840 IC8250 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 840 IC8250

ISO: GIMY 840 IC8250

$24.13
Picture of ISCAR GEPI 2.70-0.20 IC08 Grooving,Groove Turning Insert 0.008 Corner Radius 0.106 Wide

ISCAR GEPI 2.70-0.20 IC08 Grooving,Groove Turning Insert 0.008 Corner Radius 0.106 Wide

ANSI: GEPI 2.70-0.20 IC08

ISO: GEPI 2.70-0.20 IC08

$24.13
Picture of ISCAR GEPI 2.50-0.20 IC08 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide

ISCAR GEPI 2.50-0.20 IC08 Grooving,Groove Turning Insert 0.008 Corner Radius 0.098 Wide

ANSI: GEPI 2.50-0.20 IC08

ISO: GEPI 2.50-0.20 IC08

$24.13
Picture of ISCAR GEPI 3.00-0.20 IC08 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ISCAR GEPI 3.00-0.20 IC08 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide

ANSI: GEPI 3.00-0.20 IC08

ISO: GEPI 3.00-0.20 IC08

$24.13
Picture of ISCAR GEPI 2.47-0.20 IC08 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide

ISCAR GEPI 2.47-0.20 IC08 Grooving,Groove Turning Insert 0.008 Corner Radius 0.097 Wide

ANSI: GEPI 2.47-0.20 IC08

ISO: GEPI 2.47-0.20 IC08

$24.13
Picture of ISCAR GIMY 840F IC8250 Cut Off,Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 840F IC8250 Cut Off,Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 840F IC8250

ISO: GIMY 840F IC8250

$24.13
Picture of ISCAR TGMF 315 IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 315 IC8250 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 315 IC8250

ISO: TGMF 315 IC8250

$24.05
Picture of ISCAR TGMF 315 IC5010 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 315 IC5010 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 315 IC5010

ISO: TGMF 315 IC5010

$24.05
Picture of ISCAR TGMF 525 IC428 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TIC + Al2O3

ISCAR TGMF 525 IC428 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TIC + Al2O3

ANSI: TGMF 525 IC428

ISO: TGMF 525 IC428

$24.05
Picture of ARNO ROUSE SA24-2002R-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002R-S1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002R-S1 AP5020

ISO: SA24-2002R-S1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2002R-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2002R-T1 AP5020 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2002R-T1 AP5020

ISO: SA24-2002R-T1 AP5020

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDIT4.00E-2.00 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDIT4.00E-2.00 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.079 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDIT4.00E-2.00 K10

ISO: TDIT4.00E-2.00 K10

$23.92
Picture of INGERSOLL TDXT4E-0.4 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius

INGERSOLL TDXT4E-0.4 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius

ANSI: TDXT4E-0.4 CT3000

ISO: TDXT4E-0.4 CT3000

$23.88
Picture of INGERSOLL TDC4 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius

INGERSOLL TDC4 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.012 Corner Radius

ANSI: TDC4 CT3000

ISO: TDC4 CT3000

$23.77
Picture of ISCAR TGMA 408K IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius TiCN + Al2O3 + TiN

ISCAR TGMA 408K IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TGMA 408K IC5010

ISO: TGMA 408K IC5010

$23.74
Picture of ISCAR GDMM 8CC IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAIN + TiN

ISCAR GDMM 8CC IC907 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAIN + TiN

ANSI: GDMM 8CC IC907

ISO: GDMM 8CC IC907

$23.74
Picture of ISCAR TGMF 402 IC8250 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 402 IC8250 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 402 IC8250

ISO: TGMF 402 IC8250

$23.74
Picture of ISCAR TGMA 404K IC5010 Grooving,Groove Turning Insert 0.016 Corner Radius TiCN + Al2O3 + TiN

ISCAR TGMA 404K IC5010 Grooving,Groove Turning Insert 0.016 Corner Radius TiCN + Al2O3 + TiN

ANSI: TGMA 404K IC5010

ISO: TGMA 404K IC5010

$23.74
Picture of ISCAR GDMM 8CC IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GDMM 8CC IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GDMM 8CC IC808

ISO: GDMM 8CC IC808

$23.74
Picture of ISCAR GDMM 8CC IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GDMM 8CC IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GDMM 8CC IC830

ISO: GDMM 8CC IC830

$23.74
Picture of ISCAR GIMM 8CC IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIMM 8CC IC808 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIMM 8CC IC808

ISO: GIMM 8CC IC808

$23.74
Picture of ISCAR GIMM 8CC IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN

ISCAR GIMM 8CC IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN

ANSI: GIMM 8CC IC908

ISO: GIMM 8CC IC908

$23.74
Picture of ISCAR TGMF 404 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 404 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 404 IC8250

ISO: TGMF 404 IC8250

$23.74
Picture of ISCAR GEMI 3002M IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN

ISCAR GEMI 3002M IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN

ANSI: GEMI 3002M IC908

ISO: GEMI 3002M IC908

$23.66
Picture of ISCAR GEMI 3002M IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GEMI 3002M IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GEMI 3002M IC808

ISO: GEMI 3002M IC808

$23.66
Picture of ISCAR GEMI 3002N IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR GEMI 3002N IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: GEMI 3002N IC808

ISO: GEMI 3002N IC808

$23.66
Picture of ISCAR GEMI 3002N IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAIN + TiN

ISCAR GEMI 3002N IC807 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAIN + TiN

ANSI: GEMI 3002N IC807

ISO: GEMI 3002N IC807

$23.66
Picture of ISCAR GEPI 1.25-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius

ISCAR GEPI 1.25-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius

ANSI: GEPI 1.25-0.10 IC08

ISO: GEPI 1.25-0.10 IC08

$23.43
Picture of ISCAR GEPI 1.04-0.00 IC08 Grooving,Groove Turning Insert 0.041 Wide

ISCAR GEPI 1.04-0.00 IC08 Grooving,Groove Turning Insert 0.041 Wide

ANSI: GEPI 1.04-0.00 IC08

ISO: GEPI 1.04-0.00 IC08

$23.43
Picture of ISCAR GEPI 1.96-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide

ISCAR GEPI 1.96-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.077 Wide

ANSI: GEPI 1.96-0.10 IC08

ISO: GEPI 1.96-0.10 IC08

$23.43
Picture of ISCAR GEPI 1.00-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.039 Wide

ISCAR GEPI 1.00-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.039 Wide

ANSI: GEPI 1.00-0.10 IC08

ISO: GEPI 1.00-0.10 IC08

$23.43
Picture of ISCAR GEPI 1.57-0.15 IC08 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide

ISCAR GEPI 1.57-0.15 IC08 Grooving,Groove Turning Insert 0.006 Corner Radius 0.062 Wide

ANSI: GEPI 1.57-0.15 IC08

ISO: GEPI 1.57-0.15 IC08

$23.43
Picture of ISCAR GEPI 1.47-0.00 IC08 Grooving,Groove Turning Insert

ISCAR GEPI 1.47-0.00 IC08 Grooving,Groove Turning Insert

ANSI: GEPI 1.47-0.00 IC08

ISO: GEPI 1.47-0.00 IC08

$23.43
Picture of ISCAR GEPI 1.70-0.05 IC08 Grooving,Groove Turning Insert 0.002 Corner Radius 0.067 Wide

ISCAR GEPI 1.70-0.05 IC08 Grooving,Groove Turning Insert 0.002 Corner Radius 0.067 Wide

ANSI: GEPI 1.70-0.05 IC08

ISO: GEPI 1.70-0.05 IC08

$23.43
Picture of ISCAR GEPI 1.50-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius

ISCAR GEPI 1.50-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius

ANSI: GEPI 1.50-0.10 IC08

ISO: GEPI 1.50-0.10 IC08

$23.43
Picture of ISCAR GEPI 1.78-0.15 IC08 Grooving,Groove Turning Insert 0.006 Corner Radius 0.070 Wide

ISCAR GEPI 1.78-0.15 IC08 Grooving,Groove Turning Insert 0.006 Corner Radius 0.070 Wide

ANSI: GEPI 1.78-0.15 IC08

ISO: GEPI 1.78-0.15 IC08

$23.43
Picture of ISCAR GEPI 2.22-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide

ISCAR GEPI 2.22-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.087 Wide

ANSI: GEPI 2.22-0.10 IC08

ISO: GEPI 2.22-0.10 IC08

$23.43
Picture of ISCAR GEPI 1.20-0.00 IC20 Grooving,Groove Turning Insert 0.047 Wide

ISCAR GEPI 1.20-0.00 IC20 Grooving,Groove Turning Insert 0.047 Wide

ANSI: GEPI 1.20-0.00 IC20

ISO: GEPI 1.20-0.00 IC20

$23.43
Picture of ISCAR GEPI 1.85-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.073 Wide

ISCAR GEPI 1.85-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.073 Wide

ANSI: GEPI 1.85-0.10 IC08

ISO: GEPI 1.85-0.10 IC08

$23.43
Picture of ISCAR GEPI 1.40-0.00 IC08 Grooving,Groove Turning Insert

ISCAR GEPI 1.40-0.00 IC08 Grooving,Groove Turning Insert

ANSI: GEPI 1.40-0.00 IC08

ISO: GEPI 1.40-0.00 IC08

$23.43
Picture of ISCAR GEPI 2.39-0.15 IC08 Grooving,Groove Turning Insert 0.006 Corner Radius 0.094 Wide

ISCAR GEPI 2.39-0.15 IC08 Grooving,Groove Turning Insert 0.006 Corner Radius 0.094 Wide

ANSI: GEPI 2.39-0.15 IC08

ISO: GEPI 2.39-0.15 IC08

$23.43
Picture of ISCAR GEPI 2.00-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide

ISCAR GEPI 2.00-0.10 IC08 Grooving,Groove Turning Insert 0.004 Corner Radius 0.079 Wide

ANSI: GEPI 2.00-0.10 IC08

ISO: GEPI 2.00-0.10 IC08

$23.43
Picture of TUNGALOY ETX4-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY ETX4-040 AH725 Press In Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: ETX4-040 AH725

ISO: ETX4-040 AH725

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 304 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 304 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 304 IC8250

ISO: TGMF 304 IC8250

$23.28
Picture of ISCAR TGMA 304K IC5010 Grooving,Groove Turning Insert 0.016 Corner Radius TiCN + Al2O3 + TiN

ISCAR TGMA 304K IC5010 Grooving,Groove Turning Insert 0.016 Corner Radius TiCN + Al2O3 + TiN

ANSI: TGMA 304K IC5010

ISO: TGMA 304K IC5010

$23.28
Picture of ISCAR TGMF 302 IC8250 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ISCAR TGMF 302 IC8250 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiCN + Al2O3 + TiN

ANSI: TGMF 302 IC8250

ISO: TGMF 302 IC8250

$23.28
Picture of ISCAR GIMY 808 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 808 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 808 IC8250

ISO: GIMY 808 IC8250

$23.20
Picture of ISCAR GIMF 808 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 808 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 808 IC8250

ISO: GIMF 808 IC8250

$23.20
Picture of ISCAR TGMF 508 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TIC + Al2O3

ISCAR TGMF 508 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TIC + Al2O3

ANSI: TGMF 508 IC428

ISO: TGMF 508 IC428

$23.12
Picture of ISCAR GEMI 2002N IC808 Grooving,Groove Turning Insert

ISCAR GEMI 2002N IC808 Grooving,Groove Turning Insert

ANSI: GEMI 2002N IC808

ISO: GEMI 2002N IC808

$23.05
Picture of ISCAR GDMM 7CC IC354 Grooving,Groove Turning Insert 0.031 Corner Radius 0.276 Wide TiCN

ISCAR GDMM 7CC IC354 Grooving,Groove Turning Insert 0.031 Corner Radius 0.276 Wide TiCN

ANSI: GDMM 7CC IC354

ISO: GDMM 7CC IC354

$22.97
Picture of ISCAR TAGB 840Y IC8250 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR TAGB 840Y IC8250 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: TAGB 840Y IC8250

ISO: TAGB 840Y IC8250

$22.97
Picture of INGERSOLL TDIT4.00E-0.80 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.031 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDIT4.00E-0.80 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.031 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDIT4.00E-0.80 K10

ISO: TDIT4.00E-0.80 K10

$22.92
Picture of INGERSOLL TDIT4.00E-0.40 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDIT4.00E-0.40 K10 Face Grooving,Grooving,Groove Turning Insert 0.157 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDIT4.00E-0.40 K10

ISO: TDIT4.00E-0.40 K10

$22.92
Picture of TUNGALOY WGT30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY WGT30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: WGT30 T9225

ISO: WGT30 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 635-080 IC20N Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide

ISCAR TGMF 635-080 IC20N Grooving,Groove Turning Insert 0.031 Corner Radius 0.250 Wide

ANSI: TGMF 635-080 IC20N

ISO: TGMF 635-080 IC20N

$22.89
Picture of TUNGALOY GE50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.197 Wide

TUNGALOY GE50 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.197 Wide

ANSI: GE50 T9225

ISO: GE50 T9225

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-3002R-ALU-15 AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ARNO ROUSE SA17-3002R-ALU-15 AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ANSI: SA17-3002R-ALU-15 AN1015

ISO: SA17-3002R-ALU-15 AN1015

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-3003N-ALU AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius

ARNO ROUSE SA17-3003N-ALU AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius

ANSI: SA17-3003N-ALU AN1015

ISO: SA17-3003N-ALU AN1015

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-3002L-ALU-15 AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ARNO ROUSE SA17-3002L-ALU-15 AN1015 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ANSI: SA17-3002L-ALU-15 AN1015

ISO: SA17-3002L-ALU-15 AN1015

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR4-200 NS9530 Clamp Down Grooving,Groove Turning Insert 0.078 Corner Radius 0.157 Wide

TUNGALOY DTR4-200 NS9530 Clamp Down Grooving,Groove Turning Insert 0.078 Corner Radius 0.157 Wide

ANSI: DTR4-200 NS9530

ISO: DTR4-200 NS9530

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDT5E-2.5-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT5E-2.5-RU TT7505 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT5E-2.5-RU TT7505

ISO: TDT5E-2.5-RU TT7505

$22.67
Picture of INGERSOLL TDT5E-2.5-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiAIN + TiN

INGERSOLL TDT5E-2.5-RU TT9080 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiAIN + TiN

ANSI: TDT5E-2.5-RU TT9080

ISO: TDT5E-2.5-RU TT9080

$22.67
Picture of INGERSOLL TDT5E-2.5-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDT5E-2.5-RU TT5100 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDT5E-2.5-RU TT5100

ISO: TDT5E-2.5-RU TT5100

$22.67
Picture of INGERSOLL TDIT3.00E-0.40 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDIT3.00E-0.40 K10 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDIT3.00E-0.40 K10

ISO: TDIT3.00E-0.40 K10

$22.53
Picture of ISCAR TGMF 420 IC808 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 420 IC808 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 420 IC808

ISO: TGMF 420 IC808

$22.50
Picture of ISCAR TGMF 420 IC830 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR TGMF 420 IC830 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: TGMF 420 IC830

ISO: TGMF 420 IC830

$22.50
Picture of ISCAR TGMF 420 IC908 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN

ISCAR TGMF 420 IC908 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiAlN

ANSI: TGMF 420 IC908

ISO: TGMF 420 IC908

$22.50
Picture of ISCAR GIPY 5.00-2.50 IC320 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN

ISCAR GIPY 5.00-2.50 IC320 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiCN

ANSI: GIPY 5.00-2.50 IC320

ISO: GIPY 5.00-2.50 IC320

$22.43
Picture of ISCAR GIPY 5.00-2.50 IC806 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN

ISCAR GIPY 5.00-2.50 IC806 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN

ANSI: GIPY 5.00-2.50 IC806

ISO: GIPY 5.00-2.50 IC806

$22.43
Picture of ISCAR GIPY 5.00-2.50 IC907 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAIN + TiN

ISCAR GIPY 5.00-2.50 IC907 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAIN + TiN

ANSI: GIPY 5.00-2.50 IC907

ISO: GIPY 5.00-2.50 IC907

$22.43
Picture of ISCAR GIPY 5.00-2.50 IC804 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN "SUMO TEC"

ISCAR GIPY 5.00-2.50 IC804 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN "SUMO TEC"

ANSI: GIPY 5.00-2.50 IC804

ISO: GIPY 5.00-2.50 IC804

$22.43
Picture of ARNO ROUSE SA24E-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ARNO ROUSE SA24E-3003N-S1 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius TiCN

ANSI: SA24E-3003N-S1 AP5020

ISO: SA24E-3003N-S1 AP5020

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDC5 K10 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDC5 K10 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.012 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDC5 K10

ISO: TDC5 K10

$22.16
Picture of INGERSOLL TDXU5E-0.4 K10 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

INGERSOLL TDXU5E-0.4 K10 Face Grooving,Grooving,Groove Turning Insert 0.197 Wide 0.016 Corner Radius TiN + TiCN + TiC + Al2O3 + TiN

ANSI: TDXU5E-0.4 K10

ISO: TDXU5E-0.4 K10

$22.16
Picture of TUNGALOY WGR30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.059 Corner Radius 0.118 Wide

TUNGALOY WGR30 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.059 Corner Radius 0.118 Wide

ANSI: WGR30 T9225

ISO: WGR30 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR GDMW 2.4 IC908 Cut Off,Grooving,Groove Turning Insert 0.007 Corner Radius 0.094 Wide TiAlN

ISCAR GDMW 2.4 IC908 Cut Off,Grooving,Groove Turning Insert 0.007 Corner Radius 0.094 Wide TiAlN

ANSI: GDMW 2.4 IC908

ISO: GDMW 2.4 IC908

$22.12
Picture of ISCAR GDMW 2.4 IC830 Grooving,Groove Turning Insert 0.007 Corner Radius 0.094 Wide AlTiN + TiN

ISCAR GDMW 2.4 IC830 Grooving,Groove Turning Insert 0.007 Corner Radius 0.094 Wide AlTiN + TiN

ANSI: GDMW 2.4 IC830

ISO: GDMW 2.4 IC830

$22.12
Picture of ISCAR TGMF 630 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ISCAR TGMF 630 IC20 Grooving,Groove Turning Insert 0.118 Corner Radius 0.236 Wide

ANSI: TGMF 630 IC20

ISO: TGMF 630 IC20

$22.12
Picture of ISCAR GDMW 2.4 IC808 Grooving,Groove Turning Insert 0.007 Corner Radius 0.094 Wide TiAlN + AlTiN + TiN

ISCAR GDMW 2.4 IC808 Grooving,Groove Turning Insert 0.007 Corner Radius 0.094 Wide TiAlN + AlTiN + TiN

ANSI: GDMW 2.4 IC808

ISO: GDMW 2.4 IC808

$22.12
Picture of INGERSOLL TDXU3E-0.3 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius

INGERSOLL TDXU3E-0.3 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.012 Corner Radius

ANSI: TDXU3E-0.3 CT3000

ISO: TDXU3E-0.3 CT3000

$22.03
Picture of ISCAR GIMY 840 IC808 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GIMY 840 IC808 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GIMY 840 IC808

ISO: GIMY 840 IC808

$21.96
Picture of ISCAR TGMF 315 IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 315 IC808 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 315 IC808

ISO: TGMF 315 IC808

$21.96
Picture of ISCAR TGMF 315 IC908 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN

ISCAR TGMF 315 IC908 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide TiAlN

ANSI: TGMF 315 IC908

ISO: TGMF 315 IC908

$21.96
Picture of ISCAR GIMY 840 IC830 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GIMY 840 IC830 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GIMY 840 IC830

ISO: GIMY 840 IC830

$21.96
Picture of ISCAR GIMY 635-318 IC8250 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR GIMY 635-318 IC8250 Grooving,Groove Turning Insert 0.125 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: GIMY 635-318 IC8250

ISO: GIMY 635-318 IC8250

$21.96
Picture of ISCAR GIMY 840F IC908 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN

ISCAR GIMY 840F IC908 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN

ANSI: GIMY 840F IC908

ISO: GIMY 840F IC908

$21.96
Picture of ISCAR GIMY 840 IC908 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN

ISCAR GIMY 840 IC908 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN

ANSI: GIMY 840 IC908

ISO: GIMY 840 IC908

$21.96
Picture of ISCAR TGMF 315 IC830 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR TGMF 315 IC830 Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: TGMF 315 IC830

ISO: TGMF 315 IC830

$21.96
Picture of INGERSOLL TDC2 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide

INGERSOLL TDC2 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.079 Wide

ANSI: TDC2 CT3000

ISO: TDC2 CT3000

$21.96
Picture of INGERSOLL TDC3 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

INGERSOLL TDC3 CT3000 Face Grooving,Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius

ANSI: TDC3 CT3000

ISO: TDC3 CT3000

$21.96
Picture of TUNGALOY DTR3-150 NS9530 Clamp Down Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

TUNGALOY DTR3-150 NS9530 Clamp Down Grooving,Groove Turning Insert 0.059 Corner Radius 0.118 Wide

ANSI: DTR3-150 NS9530

ISO: DTR3-150 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE4-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

TUNGALOY DTE4-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

ANSI: DTE4-040 NS9530

ISO: DTE4-040 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY GE40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.157 Wide

TUNGALOY GE40 T9225 Clamp Down Cut Off,Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.157 Wide

ANSI: GE40 T9225

ISO: GE40 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 402 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 402 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 402 IC808

ISO: TGMF 402 IC808

$21.73
Picture of ISCAR TGMF 404 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN

ISCAR TGMF 404 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN

ANSI: TGMF 404 IC908

ISO: TGMF 404 IC908

$21.73
Picture of ISCAR TGMF 404 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR TGMF 404 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: TGMF 404 IC830

ISO: TGMF 404 IC830

$21.73
Picture of ISCAR TGMF 402 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ISCAR TGMF 402 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide AlTiN + TiN

ANSI: TGMF 402 IC830

ISO: TGMF 402 IC830

$21.73
Picture of ISCAR TGMF 402 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN

ISCAR TGMF 402 IC908 Grooving,Groove Turning Insert 0.008 Corner Radius 0.157 Wide TiAlN

ANSI: TGMF 402 IC908

ISO: TGMF 402 IC908

$21.73
Picture of ISCAR TGMF 404 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 404 IC808 Grooving,Groove Turning Insert 0.016 Corner Radius 0.157 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 404 IC808

ISO: TGMF 404 IC808

$21.73
Picture of ARNO ROUSE SA17-2001R-ALU-15 AN1015 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius

ARNO ROUSE SA17-2001R-ALU-15 AN1015 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius

ANSI: SA17-2001R-ALU-15 AN1015

ISO: SA17-2001R-ALU-15 AN1015

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-2002N-ALU AN1015 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius

ARNO ROUSE SA17-2002N-ALU AN1015 Grooving,Groove Turning Insert 0.079 Wide 0.008 Corner Radius

ANSI: SA17-2002N-ALU AN1015

ISO: SA17-2002N-ALU AN1015

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA17-2001L-ALU-15 AN1015 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius

ARNO ROUSE SA17-2001L-ALU-15 AN1015 Grooving,Groove Turning Insert 0.079 Wide 0.004 Corner Radius

ANSI: SA17-2001L-ALU-15 AN1015

ISO: SA17-2001L-ALU-15 AN1015

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTI4-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

TUNGALOY DTI4-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.157 Wide

ANSI: DTI4-040 NS9530

ISO: DTI4-040 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR TAGB 808Y IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR TAGB 808Y IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: TAGB 808Y IC8250

ISO: TAGB 808Y IC8250

$21.62
Picture of TUNGALOY DTE3-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

TUNGALOY DTE3-040 NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.118 Wide

ANSI: DTE3-040 NS9530

ISO: DTE3-040 NS9530

Call (262) 251-4020 for pricing
Picture of ISCAR TGMF 508 IC20N Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ISCAR TGMF 508 IC20N Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide

ANSI: TGMF 508 IC20N

ISO: TGMF 508 IC20N

$21.42
Picture of ISCAR TGMF 420 IC428 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TIC + Al2O3

ISCAR TGMF 420 IC428 Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TIC + Al2O3

ANSI: TGMF 420 IC428

ISO: TGMF 420 IC428

$21.42
Picture of ISCAR GIPY 8.00-4.00 IC07 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIPY 8.00-4.00 IC07 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIPY 8.00-4.00 IC07

ISO: GIPY 8.00-4.00 IC07

$21.27
Picture of ISCAR GIMF 608 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 608 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 608 IC8250

ISO: GIMF 608 IC8250

$21.27
Picture of ISCAR GIMF 608 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GIMF 608 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GIMF 608 IC5010

ISO: GIMF 608 IC5010

$21.27
Picture of ISCAR GIPY 8.00-4.00 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR GIPY 8.00-4.00 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: GIPY 8.00-4.00 IC20

ISO: GIPY 8.00-4.00 IC20

$21.27
Picture of ISCAR TGMF 302 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ISCAR TGMF 302 IC808 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide TiAlN + AlTiN + TiN

ANSI: TGMF 302 IC808

ISO: TGMF 302 IC808

$21.19
Picture of ISCAR TGMF 302 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ISCAR TGMF 302 IC830 Grooving,Groove Turning Insert 0.008 Corner Radius 0.118 Wide AlTiN + TiN

ANSI: TGMF 302 IC830

ISO: TGMF 302 IC830

$21.19
Picture of ISCAR GIMY 808 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN

ISCAR GIMY 808 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiAlN

ANSI: GIMY 808 IC908

ISO: GIMY 808 IC908

$21.19
Picture of ISCAR GIMF 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GIMF 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GIMF 808 IC830

ISO: GIMF 808 IC830

$21.19
Picture of ISCAR GIMY 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GIMY 808 IC830 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GIMY 808 IC830

ISO: GIMY 808 IC830

$21.19
Picture of ISCAR TGMF 304 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN

ISCAR TGMF 304 IC908 Grooving,Groove Turning Insert 0.016 Corner Radius 0.118 Wide TiAlN

ANSI: TGMF 304 IC908

ISO: TGMF 304 IC908

$21.19
Picture of ISCAR GIMY 808 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN

ISCAR GIMY 808 IC806 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide AlTiN

ANSI: GIMY 808 IC806

ISO: GIMY 808 IC806

$21.19