Aerospace

Sort by
Picture of MELIN 341860 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 341860 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSS1654T Carbide Drill Solid Carbide 140° - 142° 0.165 Dia 0.196 Shank 2.244 OAL 2 Flute 1.024 Flute Length Carbide TiN

M.A. FORD 2XDSS1654T Carbide Drill Solid Carbide 140° - 142° 0.165 Dia 0.196 Shank 2.244 OAL 2 Flute 1.024 Flute Length Carbide TiN

ISO: 2XDSS1654T

Call (262) 251-4020 for pricing
Picture of MELIN 14576 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14576 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 14660 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14660 DIA 2 SH 2.00 LOC 8.00 OAL 11.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 65579 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 65579 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45289 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 45289 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 45457 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45457 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14612 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14612 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44939 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44939 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSS2677T Carbide Drill Solid Carbide 140° - 142° 0.267 Dia 0.315 Shank 3.228 OAL 2 Flute 1.378 Flute Length Carbide TiN

M.A. FORD 2XDSS2677T Carbide Drill Solid Carbide 140° - 142° 0.267 Dia 0.315 Shank 3.228 OAL 2 Flute 1.378 Flute Length Carbide TiN

ISO: 2XDSS2677T

Call (262) 251-4020 for pricing
Picture of MELIN 64611 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 64611 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14696 DIA 20MM SH 0.7874 LOC 0.9449 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 14696 DIA 20MM SH 0.7874 LOC 0.9449 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14591 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14591 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45290 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45290 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN H7182 DIA 3/64 SH 0.2500 LOC 0.0380 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7182 DIA 3/64 SH 0.2500 LOC 0.0380 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14629 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

MELIN 14629 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 342740 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

MELIN 342740 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-208 .620x1.546x5/8x4 BSPT ThreadMills

MASTERCUT 290-208 .620x1.546x5/8x4 BSPT ThreadMills

Call (262) 251-4020 for pricing
Picture of MELIN 14592 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 14592 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 14811 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

MELIN 14811 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 65631 DIA 1/2 SH 0.50 LOC 3.1250 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 65631 DIA 1/2 SH 0.50 LOC 3.1250 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 45291 DIA 1/8 SH 0.1250 LOC 0.7500 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45291 DIA 1/8 SH 0.1250 LOC 0.7500 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 45477 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45477 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 14707 DIA 1/16 SH 0.1250 LOC 0.1875 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

MELIN 14707 DIA 1/16 SH 0.1250 LOC 0.1875 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 44957 DIA 12MM SH 0.4724 LOC 0.5510 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44957 DIA 12MM SH 0.4724 LOC 0.5510 OAL 3.5433 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-516 .300x3/4x5/16x3 ThreadMills

MASTERCUT 290-516 .300x3/4x5/16x3 ThreadMills

Call (262) 251-4020 for pricing
Picture of MELIN 64621 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 64621 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14822 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 14822 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14610 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

MELIN 14610 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 45333 DIA 7/32 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45333 DIA 7/32 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN H7230 DIA 5MM SH 0.2362 LOC 0.1378 OAL 2.9528 End Mill Carbide nACRoA Single End High Feed0.0492 1.25MM

MELIN H7230 DIA 5MM SH 0.2362 LOC 0.1378 OAL 2.9528 End Mill Carbide nACRoA Single End High Feed0.0492 1.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14708 DIA 3/32 SH 0.1250 LOC 0.2813 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

MELIN 14708 DIA 3/32 SH 0.1250 LOC 0.2813 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 342820 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 342820 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 11457 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0051 0.13MM

MELIN 11457 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 14593 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14593 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14824 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

MELIN 14824 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 65649 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

MELIN 65649 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 45401 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45401 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45489 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45489 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 14803 DIA 4MM SH 0.1575 LOC 0.5510 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 14803 DIA 4MM SH 0.1575 LOC 0.5510 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44962 DIA 16MM SH 0.6299 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44962 DIA 16MM SH 0.6299 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 11680 DIA 3MM SH 0.2362 LOC 0.4724 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0051 0.13MM

MELIN 11680 DIA 3MM SH 0.2362 LOC 0.4724 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 64630 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 64630 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14833 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 14833 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14627 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14627 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45413 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45413 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN H7246 DIA 0.50MM SH 0.1575 LOC 0.0138 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0039 0.10MM

MELIN H7246 DIA 0.50MM SH 0.1575 LOC 0.0138 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0039 0.10MM

Call (262) 251-4020 for pricing
Picture of MELIN 14804 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

MELIN 14804 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 342840 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 342840 DIA 1/2 SH 0.50 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 11701 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 11701 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14626 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14626 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 14835 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM

MELIN 14835 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 65663 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 65663 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 45445 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45445 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 45497 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45497 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 14805 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 14805 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 44973 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44973 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 11704 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 11704 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 64638 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 64638 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 69297 DIA 3/4 SH 0.7500 LOC 1.50 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 69297 DIA 3/4 SH 0.7500 LOC 1.50 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14643 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

MELIN 14643 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 45451 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45451 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN H7248 DIA 0.50MM SH 0.1575 LOC 0.0138 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0039 0.10MM

MELIN H7248 DIA 0.50MM SH 0.1575 LOC 0.0138 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0039 0.10MM

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-306 .305x5/8x3/8x3 NPT ThreadMills

MASTERCUT 290-306 .305x5/8x3/8x3 NPT ThreadMills

Call (262) 251-4020 for pricing
Picture of MELIN 34343 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 34343 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 12180 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 12180 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 14628 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1900 4.83MM

MELIN 14628 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 69307 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 69307 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 65711 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

MELIN 65711 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 45482 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45482 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 45501 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45501 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-314 .620x1-1/8x3/4x4 ThreadMills

MASTERCUT 290-314 .620x1-1/8x3/4x4 ThreadMills

Call (262) 251-4020 for pricing
Picture of MELIN 44997 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44997 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 12188 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 12188 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 64673 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 64673 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 69309 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 69309 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 14644 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 14644 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 45484 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45484 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN H7304 DIA 0.093 SH 0.2500 LOC 0.0740 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0150 0.38MM

MELIN H7304 DIA 0.093 SH 0.2500 LOC 0.0740 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 10843 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 10843 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 34345 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34345 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 12229 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 12229 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14645 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14645 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 69328 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 69328 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 65816 DIA 12MM SH 0.4724 LOC 1.9685 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

MELIN 65816 DIA 12MM SH 0.4724 LOC 1.9685 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45511 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 45511 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45543 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45543 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 11706 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 11706 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45006 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45006 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 12463 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 12463 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 64692 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1181 3.00MM

MELIN 64692 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 69532 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1181 3.00MM

MELIN 69532 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14828 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14828 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45535 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 45535 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 57709 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp

MELIN 57709 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 11893 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 11893 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 34347 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34347 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 12502 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 12502 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 14646 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14646 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 75852 DIA 5/32 SH 0.1875 LOC 0.5625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

MELIN 75852 DIA 5/32 SH 0.1875 LOC 0.5625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 66540 DIA 1 SH 1.00 LOC 1.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 66540 DIA 1 SH 1.00 LOC 1.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45625 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45625 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45553 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 45553 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 11991 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 11991 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45015 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45015 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 12517 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 12517 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 64694 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 64694 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 77641 DIA 5/32 SH 0.1875 LOC 0.5625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

MELIN 77641 DIA 5/32 SH 0.1875 LOC 0.5625 OAL 2.00 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 14829 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

MELIN 14829 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 45627 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45627 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 60630 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60630 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 12174 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 12174 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 34436 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34436 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 12525 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 12525 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14663 DIA 8MM SH 0.3150 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 14663 DIA 8MM SH 0.3150 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 77650 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

MELIN 77650 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 67745 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 67745 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45703 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 45703 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 45639 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45639 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 12234 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 12234 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45042 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

MELIN 45042 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 12549 DIA 4MM SH 0.1575 LOC 0.5510 OAL 2.0079 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

MELIN 12549 DIA 4MM SH 0.1575 LOC 0.5510 OAL 2.0079 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 64796 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 64796 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 77652 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

MELIN 77652 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide DLC Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 14932 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14932 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45818 DIA 12MM SH 0.4724 LOC 1.9685 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 45818 DIA 12MM SH 0.4724 LOC 1.9685 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 60632 DIA 1 SH 1.00 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60632 DIA 1 SH 1.00 LOC 1.8750 OAL 4.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 12510 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 12510 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 34438 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34438 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 12559 DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 12559 DIA 5/16 SH 0.3125 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 14669 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14669 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 77832 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

MELIN 77832 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 67749 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

MELIN 67749 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 47747 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 47747 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 47739 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 47739 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 12513 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 12513 DIA 3/8 SH 0.3750 LOC 0.5625 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 45065 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45065 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 12561 DIA 5/16 SH 0.3125 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 12561 DIA 5/16 SH 0.3125 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 64805 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

MELIN 64805 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 77838 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

MELIN 77838 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide DLC Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14933 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14933 DIA 1 SH 1.00 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 47751 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 47751 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 60636 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60636 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 12533 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 12533 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 34596 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 34596 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 12735 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 12735 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14670 DIA 3MM SH 0.1181 LOC 0.4724 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

MELIN 14670 DIA 3MM SH 0.1181 LOC 0.4724 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN H6720 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

MELIN H6720 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 67759 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

MELIN 67759 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 47754 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 47754 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 47743 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 47743 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 13132 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 13132 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45067 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 45067 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 13127 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 13127 DIA 1 SH 1.00 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 64815 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

MELIN 64815 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H6722 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN H6722 DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14948 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14948 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 47774 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 47774 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 60690 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60690 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 13133 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

MELIN 13133 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 34599 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34599 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 13336 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.5039 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 13336 DIA 14MM SH 0.5512 LOC 1.0236 OAL 3.5039 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 14806 DIA 6MM SH 0.2362 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

MELIN 14806 DIA 6MM SH 0.2362 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN H6727 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN H6727 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 14614 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14614 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 47778 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 47778 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 13315 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 13315 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 13304 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 13304 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45097 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 45097 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 13404 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0323 0.82MM

MELIN 13404 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0323 0.82MM

Call (262) 251-4020 for pricing
Picture of MELIN 64828 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 64828 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN H6748 DIA 1/64 SH 0.1250 LOC 0.0120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6748 DIA 1/64 SH 0.1250 LOC 0.0120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14949 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14949 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 47779 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 47779 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 60700 DIA 1/4 SH 0.3750 LOC 1.7500 OAL 3.5620 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60700 DIA 1/4 SH 0.3750 LOC 1.7500 OAL 3.5620 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 13306 DIA 4MM SH 0.1575 LOC 0.4331 OAL 2.4803 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 13306 DIA 4MM SH 0.1575 LOC 0.4331 OAL 2.4803 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 361335 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 361335 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 13415 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

MELIN 13415 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 14827 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 14827 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H6755 DIA 0.039 SH 0.2500 LOC 0.0310 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6755 DIA 0.039 SH 0.2500 LOC 0.0310 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14641 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14641 DIA 2 SH 2.00 LOC 4.00 OAL 7.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 49284 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 49284 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 13318 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 13318 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 13321 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 13321 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 45205 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 45205 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT905100 1/4-28.00TPI Cut Spiral Flute Plug 3.5P-5.0P HSSE-Powder Metal TiCN

WIDIA/KENNAMETAL GT905100 1/4-28.00TPI Cut Spiral Flute Plug 3.5P-5.0P HSSE-Powder Metal TiCN

Call (262) 251-4020 for pricing
Picture of MELIN 64859 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 64859 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN H6763 DIA 0.062 SH 0.2500 LOC 0.0500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6763 DIA 0.062 SH 0.2500 LOC 0.0500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14982 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14982 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 49289 DIA 3/4 SH 0.7500 LOC 1.00 OAL 7.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 49289 DIA 3/4 SH 0.7500 LOC 1.00 OAL 7.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 61443 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0157 0.40MM

MELIN 61443 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0157 0.40MM

Call (262) 251-4020 for pricing
Picture of MELIN 13338 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

MELIN 13338 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 361800 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 361800 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT925006 No.4-48.00TPI Cut Spiral Flute Plug 3.5P-5.0P HSSE-Powder Metal Nitride + Steam Oxide

WIDIA/KENNAMETAL GT925006 No.4-48.00TPI Cut Spiral Flute Plug 3.5P-5.0P HSSE-Powder Metal Nitride + Steam Oxide

Call (262) 251-4020 for pricing
Picture of MELIN 14831 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM

MELIN 14831 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H6780 DIA 0.078 SH 0.2500 LOC 0.0620 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6780 DIA 0.078 SH 0.2500 LOC 0.0620 OAL 2.50 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14671 DIA 3MM SH 0.1181 LOC 0.4724 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 14671 DIA 3MM SH 0.1181 LOC 0.4724 OAL 1.4961 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 49292 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 49292 DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 13325 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 13325 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9921 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 13339 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 13339 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing