Aerospace

Sort by
Picture of MELIN 44391 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44391 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 65593 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 65593 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 63624 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 63624 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 66888 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 66888 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 17701 DIA 7/32 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

MELIN 17701 DIA 7/32 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 44806 DIA 6MM SH 0.2362 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 44806 DIA 6MM SH 0.2362 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN H6997 DIA 1MM SH 0.1575 LOC 0.0315 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6997 DIA 1MM SH 0.1575 LOC 0.0315 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDCR2656T Deep Hole Coolant Thru Carbide 140° 0.265 Dia 0.312 Shank 3.580 OAL 2 Flute 1.890 Flute Length Carbide TiN

M.A. FORD 2XDCR2656T Deep Hole Coolant Thru Carbide 140° 0.265 Dia 0.312 Shank 3.580 OAL 2 Flute 1.890 Flute Length Carbide TiN

ISO: 2XDCR2656T

Call (262) 251-4020 for pricing
Picture of MELIN 19300 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 19300 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 65615 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

MELIN 65615 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 17703 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

MELIN 17703 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN TM-1-20-H 1-20 Multi Fl Carbide 60° Fl, UN Thread

MELIN TM-1-20-H 1-20 Multi Fl Carbide 60° Fl, UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 65205 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 65205 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44827 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44827 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 45339 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45339 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDCR4062T Deep Hole Coolant Thru Carbide 140° 0.406 Dia 0.468 Shank 4.720 OAL 2 Flute 2.360 Flute Length Carbide TiN

M.A. FORD 2XDCR4062T Deep Hole Coolant Thru Carbide 140° 0.406 Dia 0.468 Shank 4.720 OAL 2 Flute 2.360 Flute Length Carbide TiN

ISO: 2XDCR4062T

Call (262) 251-4020 for pricing
Picture of MELIN 44430 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44430 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 65619 DIA 1/2 SH 0.50 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 65619 DIA 1/2 SH 0.50 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 63715 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 63715 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-M3-.5-H M3-.5 Multi Fl Carbide 60° Fl, UN Thread

MELIN TM-M3-.5-H M3-.5 Multi Fl Carbide 60° Fl, UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 49301 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 49301 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44828 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44828 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN H6998 DIA 1.50MM SH 0.1575 LOC 0.0531 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H6998 DIA 1.50MM SH 0.1575 LOC 0.0531 OAL 1.968 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSR1220T Carbide Drill Solid Carbide 140° - 142° 0.122 Dia 0.157 Shank 2.716 OAL 2 Flute 1.260 Flute Length Carbide TiN

M.A. FORD 2XDSR1220T Carbide Drill Solid Carbide 140° - 142° 0.122 Dia 0.157 Shank 2.716 OAL 2 Flute 1.260 Flute Length Carbide TiN

ISO: 2XDSR1220T

Call (262) 251-4020 for pricing
Picture of MELIN 19301 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 19301 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 65637 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 65637 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 16050 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 16050 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 15959 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

MELIN 15959 DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 65269 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 65269 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44831 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

MELIN 44831 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 45443 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45443 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSR3320T Carbide Drill Solid Carbide 140° - 142° 0.332 Dia 0.390 Shank 4.060 OAL 2 Flute 2.170 Flute Length Carbide TiN

M.A. FORD 2XDSR3320T Carbide Drill Solid Carbide 140° - 142° 0.332 Dia 0.390 Shank 4.060 OAL 2 Flute 2.170 Flute Length Carbide TiN

ISO: 2XDSR3320T

Call (262) 251-4020 for pricing
Picture of MELIN 44445 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44445 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 65814 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 65814 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 64111 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

MELIN 64111 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 16543 DIA 6MM SH 0.2362 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

MELIN 16543 DIA 6MM SH 0.2362 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 49327 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 49327 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44857 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44857 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN H7013 DIA 4MM SH 0.2362 LOC 0.1181 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7013 DIA 4MM SH 0.2362 LOC 0.1181 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSR3750T Carbide Drill Solid Carbide 140° - 142° 0.375 Dia 0.390 Shank 4.060 OAL 2 Flute 2.170 Flute Length Carbide TiN

M.A. FORD 2XDSR3750T Carbide Drill Solid Carbide 140° - 142° 0.375 Dia 0.390 Shank 4.060 OAL 2 Flute 2.170 Flute Length Carbide TiN

ISO: 2XDSR3750T

Call (262) 251-4020 for pricing
Picture of MELIN 19302 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 19302 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 65818 DIA 12MM SH 0.4724 LOC 1.9685 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

MELIN 65818 DIA 12MM SH 0.4724 LOC 1.9685 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 16082 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 16082 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 16866 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 16866 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 65281 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0050 0.13MM

MELIN 65281 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 44858 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44858 DIA 1/4 SH 0.2500 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45453 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45453 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSS3307T Carbide Drill Solid Carbide 140° - 142° 0.330 Dia 0.393 Shank 3.503 OAL 2 Flute 1.693 Flute Length Carbide TiN

M.A. FORD 2XDSS3307T Carbide Drill Solid Carbide 140° - 142° 0.330 Dia 0.393 Shank 3.503 OAL 2 Flute 1.693 Flute Length Carbide TiN

ISO: 2XDSS3307T

Call (262) 251-4020 for pricing
Picture of MELIN 44478 DIA 1/2 SH 0.50 LOC 1.50 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 44478 DIA 1/2 SH 0.50 LOC 1.50 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 66550 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 66550 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64123 DIA 25MM SH 0.9843 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0098 0.25MM

MELIN 64123 DIA 25MM SH 0.9843 LOC 1.4961 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-1/4-28-S 1/4-28 Multi Fl Carbide 60° UN Thread

MELIN TM-1/4-28-S 1/4-28 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 49330 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 49330 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 44877 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44877 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN H7015 DIA 4MM SH 0.2362 LOC 0.1181 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

MELIN H7015 DIA 4MM SH 0.2362 LOC 0.1181 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of M.A. FORD DE1BM0300 DIA 3MM SH 0.1181 LOC 0.2362 OAL 1.4961 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

M.A. FORD DE1BM0300 DIA 3MM SH 0.1181 LOC 0.2362 OAL 1.4961 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 19303 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 19303 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 66869 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 66869 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 16333 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 16333 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-5/16-24-S 5/16-24 Multi Fl Carbide 60° UN Thread

MELIN TM-5/16-24-S 5/16-24 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 65296 DIA 5/32 SH 0.1875 LOC 0.5625 OAL 2.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0050 0.13MM

MELIN 65296 DIA 5/32 SH 0.1875 LOC 0.5625 OAL 2.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 44893 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44893 DIA 3/4 SH 0.7500 LOC 0.7500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45457 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45457 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD DE1BM0500 DIA 5MM SH 0.1969 LOC 0.3150 OAL 1.9685 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

M.A. FORD DE1BM0500 DIA 5MM SH 0.1969 LOC 0.3150 OAL 1.9685 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44492 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 44492 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 66887 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 66887 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 64223 DIA 1/2 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 64223 DIA 1/2 SH 0.50 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-9/16-12-S 9/16-12 Multi Fl Carbide 60° UN Thread

MELIN TM-9/16-12-S 9/16-12 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 49331 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 49331 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44895 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44895 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN H7029 DIA 1.50MM SH 0.1575 LOC 0.0531 OAL 2.480 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0079 0.20MM

MELIN H7029 DIA 1.50MM SH 0.1575 LOC 0.0531 OAL 2.480 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0079 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 13625 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 13625 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 19331 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 19331 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 67747 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 67747 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 16545 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 16545 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-3/4-20-S 3/4-20 Multi Fl Carbide 60° UN Thread

MELIN TM-3/4-20-S 3/4-20 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 65347 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 65347 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 44941 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44941 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45477 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45477 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 13657 DIA 18MM SH 0.7087 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 13657 DIA 18MM SH 0.7087 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44499 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1250 3.18MM

MELIN 44499 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 67757 DIA 3/8 SH 0.3750 LOC 1.1250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 67757 DIA 3/8 SH 0.3750 LOC 1.1250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 64354 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 64354 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-1-16-S 1-16 Multi Fl Carbide 60° UN Thread

MELIN TM-1-16-S 1-16 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 49332 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 49332 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 44942 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44942 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN H7048 DIA 3MM SH 0.2500 LOC 0.0940 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7048 DIA 3MM SH 0.2500 LOC 0.0940 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14169 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

MELIN 14169 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 19337 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 19337 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD Carbide Drill Solid Carbide 140° - 142° 0.118 Dia 0.118 Shank 2.480 OAL 2 Flute 0.945 Flute Length Carbide TiN

M.A. FORD Carbide Drill Solid Carbide 140° - 142° 0.118 Dia 0.118 Shank 2.480 OAL 2 Flute 0.945 Flute Length Carbide TiN

ISO: 2XDSR1181T

Call (262) 251-4020 for pricing
Picture of MELIN 16546 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 16546 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-6-32-H 6-32 Multi Fl Carbide 60° Fl, UN Thread

MELIN TM-6-32-H 6-32 Multi Fl Carbide 60° Fl, UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 65351 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

MELIN 65351 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 44944 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44944 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45489 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45489 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 14247 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 14247 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 44669 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44669 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD DE2B2500 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

M.A. FORD DE2B2500 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 64377 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 64377 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-5/16-18-H 5/16-18 Multi Fl Carbide 60° Fl, UN Thread

MELIN TM-5/16-18-H 5/16-18 Multi Fl Carbide 60° Fl, UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 49532 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

MELIN 49532 DIA 25MM SH 0.9843 LOC 2.9528 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 44959 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44959 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN H7130 DIA 0.093 SH 0.2500 LOC 0.0740 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN H7130 DIA 0.093 SH 0.2500 LOC 0.0740 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 14249 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 14249 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 19545 DIA 20MM SH 0.7874 LOC 2.1654 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 19545 DIA 20MM SH 0.7874 LOC 2.1654 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD DE2BM0800 DIA 8MM SH 0.3150 LOC 0.3937 OAL 2.5197 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

M.A. FORD DE2BM0800 DIA 8MM SH 0.3150 LOC 0.3937 OAL 2.5197 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 16869 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 16869 DIA 5/8 SH 0.6250 LOC 2.50 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN TM-1/2-28-H 1/2-28 Multi Fl Carbide 60° Fl, UN Thread

MELIN TM-1/2-28-H 1/2-28 Multi Fl Carbide 60° Fl, UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 65367 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 65367 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44977 DIA 25MM SH 0.9843 LOC 1.0236 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44977 DIA 25MM SH 0.9843 LOC 1.0236 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45497 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45497 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 14353 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

MELIN 14353 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Cobalt Uncoated Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 44837 DIA 25MM SH 0.9843 LOC 1.0236 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 44837 DIA 25MM SH 0.9843 LOC 1.0236 OAL 5.7087 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD DE2BM1200 DIA 12MM SH 0.4724 LOC 0.5906 OAL 2.9528 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

M.A. FORD DE2BM1200 DIA 12MM SH 0.4724 LOC 0.5906 OAL 2.9528 End Mill Standard Flute Standard Helix PCD Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 64397 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 64397 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 14559 DIA 3MM SH 0.2362 LOC 0.1102 OAL 2.9528 End Mill Carbide nACRoA Single End High Feed0.0295 0.75MM

MELIN 14559 DIA 3MM SH 0.2362 LOC 0.1102 OAL 2.9528 End Mill Carbide nACRoA Single End High Feed0.0295 0.75MM

Call (262) 251-4020 for pricing
Picture of MELIN 49789 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 49789 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44992 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44992 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN H7148 DIA 1.50MM SH 0.1575 LOC 0.0531 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0079 0.20MM

MELIN H7148 DIA 1.50MM SH 0.1575 LOC 0.0531 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0079 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 14354 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14354 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 19786 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 19786 DIA 1 SH 1.00 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDCR2087T Deep Hole Coolant Thru Carbide 140° 0.208 Dia 0.236 Shank 3.228 OAL 2 Flute 1.575 Flute Length Carbide TiN

M.A. FORD 2XDCR2087T Deep Hole Coolant Thru Carbide 140° 0.208 Dia 0.236 Shank 3.228 OAL 2 Flute 1.575 Flute Length Carbide TiN

ISO: 2XDCR2087T

Call (262) 251-4020 for pricing
Picture of MELIN TM-10-28-S 10-28 Multi Fl Carbide 60° UN Thread

MELIN TM-10-28-S 10-28 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 14574 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14574 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 65387 DIA 9/32 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

MELIN 65387 DIA 9/32 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 44994 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44994 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45501 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45501 DIA 7/16 SH 0.4375 LOC 0.5625 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 14369 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 14369 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 44864 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44864 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDCR2677T Deep Hole Coolant Thru Carbide 140° 0.267 Dia 0.315 Shank 3.582 OAL 2 Flute 1.890 Flute Length Carbide TiN

M.A. FORD 2XDCR2677T Deep Hole Coolant Thru Carbide 140° 0.267 Dia 0.315 Shank 3.582 OAL 2 Flute 1.890 Flute Length Carbide TiN

ISO: 2XDCR2677T

Call (262) 251-4020 for pricing
Picture of MELIN 64431 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 64431 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 14579 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14579 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 53404 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0323 0.82MM

MELIN 53404 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0323 0.82MM

Call (262) 251-4020 for pricing
Picture of MELIN 44996 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44996 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN H7149 DIA 1.50MM SH 0.1575 LOC 0.0531 OAL 2.480 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0079 0.20MM

MELIN H7149 DIA 1.50MM SH 0.1575 LOC 0.0531 OAL 2.480 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0079 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 14370 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 14370 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 19991 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 19991 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDCR3071T Deep Hole Coolant Thru Carbide 140° 0.307 Dia 0.315 Shank 3.582 OAL 2 Flute 1.890 Flute Length Carbide TiN

M.A. FORD 2XDCR3071T Deep Hole Coolant Thru Carbide 140° 0.307 Dia 0.315 Shank 3.582 OAL 2 Flute 1.890 Flute Length Carbide TiN

ISO: 2XDCR3071T

Call (262) 251-4020 for pricing
Picture of MELIN TM-5/8-10-S 5/8-10 Multi Fl Carbide 60° UN Thread

MELIN TM-5/8-10-S 5/8-10 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 14581 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14581 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 65437 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

MELIN 65437 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 45010 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45010 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45543 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45543 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 14371 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14371 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44872 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44872 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSR0256T Carbide Drill Solid Carbide 140° - 142° 0.025 Dia 0.025 Shank 1.023 OAL 2 Flute 0.315 Flute Length Carbide TiN

M.A. FORD 2XDSR0256T Carbide Drill Solid Carbide 140° - 142° 0.025 Dia 0.025 Shank 1.023 OAL 2 Flute 0.315 Flute Length Carbide TiN

ISO: 2XDSR0256T

Call (262) 251-4020 for pricing
Picture of MELIN 64480 DIA 1/2 SH 0.50 LOC 1.50 OAL 3.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1250 3.18MM

MELIN 64480 DIA 1/2 SH 0.50 LOC 1.50 OAL 3.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1250 3.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 14598 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14598 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 55249 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM

MELIN 55249 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45011 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45011 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN H7166 DIA 6MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0197 0.50MM

MELIN H7166 DIA 6MM SH 0.2362 LOC 0.1969 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 14387 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14387 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 33344 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 33344 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSR0469T Carbide Drill Solid Carbide 140° - 142° 0.046 Dia 0.046 Shank 1.500 OAL 2 Flute 0.750 Flute Length Carbide TiN

M.A. FORD 2XDSR0469T Carbide Drill Solid Carbide 140° - 142° 0.046 Dia 0.046 Shank 1.500 OAL 2 Flute 0.750 Flute Length Carbide TiN

ISO: 2XDSR0469T

Call (262) 251-4020 for pricing
Picture of MELIN TM-5/8-18-S 5/8-18 Multi Fl Carbide 60° UN Thread

MELIN TM-5/8-18-S 5/8-18 Multi Fl Carbide 60° UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 14600 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14600 DIA 1-1/2 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 65447 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 65447 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45044 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 45044 DIA 25MM SH 0.9843 LOC 1.0236 OAL 4.3307 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45553 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 45553 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14405 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 14405 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 44880 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44880 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSR0590T Carbide Drill Solid Carbide 140° - 142° 0.059 Dia 0.059 Shank 1.574 OAL 2 Flute 0.709 Flute Length Carbide TiN

M.A. FORD 2XDSR0590T Carbide Drill Solid Carbide 140° - 142° 0.059 Dia 0.059 Shank 1.574 OAL 2 Flute 0.709 Flute Length Carbide TiN

ISO: 2XDSR0590T

Call (262) 251-4020 for pricing
Picture of MELIN 64482 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0400 1.02MM

MELIN 64482 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0400 1.02MM

Call (262) 251-4020 for pricing
Picture of MELIN 14605 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 14605 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MASTERCUT 290-028 .350x7/8x3/8x3-1/2 ThreadMills

MASTERCUT 290-028 .350x7/8x3/8x3-1/2 ThreadMills

Call (262) 251-4020 for pricing
Picture of MELIN 45077 DIA 5/16 SH 0.3125 LOC 0.50 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45077 DIA 5/16 SH 0.3125 LOC 0.50 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN H7179 DIA 0.062 SH 0.2500 LOC 0.0500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0100 0.25MM

MELIN H7179 DIA 0.062 SH 0.2500 LOC 0.0500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14423 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14423 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 341090 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 341090 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSR0945T Carbide Drill Solid Carbide 140° - 142° 0.094 Dia 0.094 Shank 2.244 OAL 2 Flute 1.181 Flute Length Carbide TiN

M.A. FORD 2XDSR0945T Carbide Drill Solid Carbide 140° - 142° 0.094 Dia 0.094 Shank 2.244 OAL 2 Flute 1.181 Flute Length Carbide TiN

ISO: 2XDSR0945T

Call (262) 251-4020 for pricing
Picture of MELIN TM-1/4-20-H 1/4-20 Multi Fl Carbide 60° Fl, UN Thread

MELIN TM-1/4-20-H 1/4-20 Multi Fl Carbide 60° Fl, UN Thread

Call (262) 251-4020 for pricing
Picture of MELIN 14625 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14625 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 65557 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 65557 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45193 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45193 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 45639 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45639 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 14439 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1900 4.83MM

MELIN 14439 DIA 1-1/4 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt Uncoated Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 44882 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44882 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSR1719T Carbide Drill Solid Carbide 140° - 142° 0.171 Dia 0.187 Shank 3.150 OAL 2 Flute 1.500 Flute Length Carbide TiN

M.A. FORD 2XDSR1719T Carbide Drill Solid Carbide 140° - 142° 0.171 Dia 0.187 Shank 3.150 OAL 2 Flute 1.500 Flute Length Carbide TiN

ISO: 2XDSR1719T

Call (262) 251-4020 for pricing
Picture of MELIN 64581 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 64581 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 14632 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 14632 DIA 3/4 SH 0.7500 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14575 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 14575 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45227 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 45227 DIA 1 SH 1.00 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN H7180 DIA 1/64 SH 0.1250 LOC 0.0120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7180 DIA 1/64 SH 0.1250 LOC 0.0120 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14577 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 14577 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 341335 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 341335 DIA 1/4 SH 0.2500 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSS0984T Carbide Drill Solid Carbide 140° - 142° 0.098 Dia 0.098 Shank 1.692 OAL 2 Flute 0.552 Flute Length Carbide TiN

M.A. FORD 2XDSS0984T Carbide Drill Solid Carbide 140° - 142° 0.098 Dia 0.098 Shank 1.692 OAL 2 Flute 0.552 Flute Length Carbide TiN

ISO: 2XDSS0984T

Call (262) 251-4020 for pricing
Picture of MELIN 14553 DIA 3/32 SH 0.2500 LOC 0.0900 OAL 3.00 End Mill Carbide nACRoA Single End High Feed0.0230 0.58MM

MELIN 14553 DIA 3/32 SH 0.2500 LOC 0.0900 OAL 3.00 End Mill Carbide nACRoA Single End High Feed0.0230 0.58MM

Call (262) 251-4020 for pricing
Picture of MELIN 14651 DIA 6MM SH 0.2362 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 14651 DIA 6MM SH 0.2362 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 65561 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 65561 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 45273 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45273 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 47739 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 47739 DIA 3/16 SH 0.1875 LOC 0.6250 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 14609 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 14609 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 44932 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 44932 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of M.A. FORD 2XDSS1590T Carbide Drill Solid Carbide 140° - 142° 0.159 Dia 0.187 Shank 2.500 OAL 2 Flute 1.000 Flute Length Carbide TiN

M.A. FORD 2XDSS1590T Carbide Drill Solid Carbide 140° - 142° 0.159 Dia 0.187 Shank 2.500 OAL 2 Flute 1.000 Flute Length Carbide TiN

ISO: 2XDSS1590T

Call (262) 251-4020 for pricing
Picture of MELIN 64603 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

MELIN 64603 DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 14658 DIA 8MM SH 0.3150 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 14658 DIA 8MM SH 0.3150 LOC 1.1811 OAL 2.9528 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 14578 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 14578 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45289 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 45289 DIA 1/8 SH 0.1250 LOC 0.50 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN H7181 DIA 0.031 SH 0.2500 LOC 0.0250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN H7181 DIA 0.031 SH 0.2500 LOC 0.0250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 14611 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

MELIN 14611 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing