Medical

Sort by
Picture of ICE-NFE-075-3-5-225-BN-RND-ZrN-L-VPH DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

ICE-NFE-075-3-5-225-BN-RND-ZrN-L-VPH DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 19733 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 19733 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 65000 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 65000 DIA 1/4 SH 0.2500 LOC 0.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45099 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45099 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 64621 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 64621 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 364840 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 364840 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 341300 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 341300 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15427 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 15427 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 62554 DIA 3/16 SH 0.1875 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 62554 DIA 3/16 SH 0.1875 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 19738 DIA 1 SH 1.00 LOC 1.50 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 19738 DIA 1 SH 1.00 LOC 1.50 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of ICE 482-750-5-030R DIA 3/4 SH 0.7500 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Corner Radius 0.0300 0.76MM Black

ICE 482-750-5-030R DIA 3/4 SH 0.7500 LOC 2.50 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Corner Radius 0.0300 0.76MM Black

Call (262) 251-4020 for pricing
Picture of MELIN 45271 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 45271 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 44950 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44950 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 364880 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 364880 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15595 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 15595 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 15445 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 15445 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-0375-2-4-175-SQ-RND-ZrN-EL DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Square Sharp Green

ICE-NFE-0375-2-4-175-SQ-RND-ZrN-EL DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Square Sharp Green

Call (262) 251-4020 for pricing
Picture of MELIN 33337 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 33337 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 65018 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 65018 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45285 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45285 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 64630 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 64630 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 40839 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 40839 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 341600 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 341600 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 15447 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 15447 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 62555 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 62555 DIA 3/16 SH 0.1875 LOC 0.2813 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 33338 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 33338 DIA 1-1/4 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of ICE 388-100-5-060R DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Corner Radius 0.0600 1.52MM Black

ICE 388-100-5-060R DIA 1 SH 1.00 LOC 3.2500 OAL 6.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Corner Radius 0.0600 1.52MM Black

Call (262) 251-4020 for pricing
Picture of MELIN 45313 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45313 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 44968 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 44968 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 41443 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0157 0.40MM

MELIN 41443 DIA 12MM SH 0.4724 LOC 0.9843 OAL 2.9921 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0157 0.40MM

Call (262) 251-4020 for pricing
Picture of MELIN 15625 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 15625 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15465 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15465 DIA 3/8 SH 0.3750 LOC 0.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-05-2-6-3-BN-RND-ZrN-EL DIA 1/2 SH 0.50 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

ICE-NFE-05-2-6-3-BN-RND-ZrN-EL DIA 1/2 SH 0.50 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide ZrN Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 33718 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 33718 DIA 2 SH 2.00 LOC 2.00 OAL 5.7500 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 65034 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 65034 DIA 10MM SH 0.3937 LOC 0.4724 OAL 3.1496 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 45353 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 45353 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 64638 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

MELIN 64638 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 41461 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0051 0.13MM

MELIN 41461 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0051 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 341620 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 341620 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15479 DIA 3/8 SH 0.3750 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

MELIN 15479 DIA 3/8 SH 0.3750 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 62556 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 62556 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 340880 DIA 3/16 SH 0.1875 LOC 0.5625 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 340880 DIA 3/16 SH 0.1875 LOC 0.5625 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of ICE 380-100-7 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Square Sharp Black

ICE 380-100-7 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Square Sharp Black

Call (262) 251-4020 for pricing
Picture of MELIN 45397 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45397 DIA 5/16 SH 0.3125 LOC 0.4375 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 44986 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44986 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 41986 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

MELIN 41986 DIA 8MM SH 0.3150 LOC 0.7874 OAL 2.4803 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 15627 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 15627 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15483 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 15483 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-1-2-4-15-030-RND-BRITE-R-VPH DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0300 0.76MM Green

ICE-NFE-1-2-4-15-030-RND-BRITE-R-VPH DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0300 0.76MM Green

Call (262) 251-4020 for pricing
Picture of MELIN 341240 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 341240 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 65053 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0050 0.13MM

MELIN 65053 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 45435 DIA 11/32 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45435 DIA 11/32 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 64673 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 64673 DIA 12MM SH 0.4724 LOC 0.5510 OAL 4.9213 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 42213 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 42213 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 342520 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 342520 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 15484 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 15484 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 62660 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 62660 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 341260 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 341260 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of ICE 380-100-7-030R DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Corner Radius 0.0300 0.76MM Black

ICE 380-100-7-030R DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Corner Radius 0.0300 0.76MM Black

Call (262) 251-4020 for pricing
Picture of MELIN 45439 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 45439 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45001 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45001 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42215 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 42215 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15814 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

MELIN 15814 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 15533 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 15533 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-025-3-25-075-020-RND-BRITE-R-VPH DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0200 0.51MM Green

ICE-NFE-025-3-25-075-020-RND-BRITE-R-VPH DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0200 0.51MM Green

Call (262) 251-4020 for pricing
Picture of MELIN 341580 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 341580 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 65193 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

MELIN 65193 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 45485 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45485 DIA 3/8 SH 0.3750 LOC 1.00 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64692 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1181 3.00MM

MELIN 64692 DIA 16MM SH 0.6299 LOC 0.7087 OAL 5.9055 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1181 3.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 42367 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 42367 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 34353 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 34353 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of MELIN 15601 DIA 1/2 SH 0.50 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 15601 DIA 1/2 SH 0.50 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 62662 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 62662 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 341640 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 341640 DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of ICE 482-100-7-030R DIA 1 SH 1.00 LOC 2.6250 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Corner Radius 0.0300 0.76MM Black

ICE 482-100-7-030R DIA 1 SH 1.00 LOC 2.6250 OAL 5.00 End Mill Standard Flute Variable Helix Carbide ALL4 Single End Corner Radius 0.0300 0.76MM Black

Call (262) 251-4020 for pricing
Picture of MELIN 45529 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45529 DIA 1/2 SH 0.50 LOC 0.6250 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45037 DIA 16MM SH 0.6299 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 45037 DIA 16MM SH 0.6299 LOC 0.7087 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 42369 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42369 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 4.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 16550 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

MELIN 16550 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 15621 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 15621 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-03125-3-25-08125-010-RND-BRITE-R-VPH DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0100 0.25MM Green

ICE-NFE-03125-3-25-08125-010-RND-BRITE-R-VPH DIA 5/16 SH 0.3125 LOC 0.8125 OAL 2.50 End Mill Standard Flute Variable Helix Carbide Single End Corner Radius 0.0100 0.25MM Green

Call (262) 251-4020 for pricing
Picture of MELIN 342020 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

MELIN 342020 DIA 3/8 SH 0.3750 LOC 1.00 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 65211 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 65211 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 45555 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45555 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 64694 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 64694 DIA 20MM SH 0.7874 LOC 0.9449 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 42424 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 42424 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 34356 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34356 DIA 1 SH 1.00 LOC 3.00 OAL 5.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 15816 DIA 12MM SH 0.4724 LOC 1.9685 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 15816 DIA 12MM SH 0.4724 LOC 1.9685 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 62676 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 62676 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 342060 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

MELIN 342060 DIA 3/8 SH 0.3750 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of INGERSOLL 4207095 0.6181 (15.70 mm) Gold Twist Replaceable Tips|Non-Ferrous|Grade IN05S

INGERSOLL 4207095 0.6181 (15.70 mm) Gold Twist Replaceable Tips|Non-Ferrous|Grade IN05S

ISO: 4207095

Call (262) 251-4020 for pricing
Picture of MELIN 45571 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 45571 DIA 1/2 SH 0.50 LOC 0.6250 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 45203 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 45203 DIA 1 SH 1.00 LOC 1.2500 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 42516 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 42516 DIA 7/16 SH 0.4375 LOC 0.8750 OAL 2.7500 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 57732 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM - 0.0350 0.89MM

MELIN 57732 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM - 0.0350 0.89MM

Call (262) 251-4020 for pricing
Picture of MELIN 16023 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 16023 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-0375-2-3-1125-SQ-RND-BRITE-L-VPH DIA 3/8 SH 0.3750 LOC 1.1250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Single End Square Sharp Green

ICE-NFE-0375-2-3-1125-SQ-RND-BRITE-L-VPH DIA 3/8 SH 0.3750 LOC 1.1250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Single End Square Sharp Green

Call (262) 251-4020 for pricing
Picture of MELIN 342540 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

MELIN 342540 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 65225 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 65225 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45667 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45667 DIA 5/8 SH 0.6250 LOC 0.7500 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64796 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 64796 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 42531 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 42531 DIA 3/4 SH 0.7500 LOC 0.8750 OAL 5.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 34385 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34385 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 16552 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

MELIN 16552 DIA 3/4 SH 0.7500 LOC 1.00 OAL 6.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 62856 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

MELIN 62856 DIA 3/8 SH 0.3750 LOC 1.50 OAL 3.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 34328 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34328 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of INGERSOLL ER32T06SA-20 0.364 Screw ON ER STEEL T06Replacable Head Acc. ER 32 Steel Single End CHIPSURFER

INGERSOLL ER32T06SA-20 0.364 Screw ON ER STEEL T06Replacable Head Acc. ER 32 Steel Single End CHIPSURFER

Call (262) 251-4020 for pricing
Picture of MELIN 45709 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 45709 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 45233 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45233 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42560 DIA 5/16 SH 0.3125 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 42560 DIA 5/16 SH 0.3125 LOC 0.6250 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 60678 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60678 DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 19157 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

MELIN 19157 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-075-3-4-15-BN-RND-BRITE-R-VPH DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

ICE-NFE-075-3-4-15-BN-RND-BRITE-R-VPH DIA 3/4 SH 0.7500 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 34329 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34329 DIA 3/4 SH 0.7500 LOC 1.6250 OAL 3.8750 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 65271 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

MELIN 65271 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 46540 DIA 1 SH 1.00 LOC 1.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 46540 DIA 1 SH 1.00 LOC 1.2500 OAL 7.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64805 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

MELIN 64805 DIA 5MM SH 0.1969 LOC 0.7874 OAL 2.0079 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 42579 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

MELIN 42579 DIA 7/16 SH 0.4375 LOC 0.6250 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 34406 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34406 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 19159 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 19159 DIA 3/4 SH 0.7500 LOC 1.00 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 62866 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

MELIN 62866 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 34387 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34387 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of INGERSOLL C3T12X45 0.72 Screw ON PSC "Capto Type" STEEL T12Replacable Head Acc. PSC 4 "Capto Type" Steel Single End CHIPSURFER

INGERSOLL C3T12X45 0.72 Screw ON PSC "Capto Type" STEEL T12Replacable Head Acc. PSC 4 "Capto Type" Steel Single End CHIPSURFER

Call (262) 251-4020 for pricing
Picture of MELIN 46545 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 46545 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 45280 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45280 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 42661 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 42661 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 60684 DIA 3/4 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60684 DIA 3/4 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 19387 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

MELIN 19387 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-0375-2-3-1125-BN-RND-BRITE-L-VPH DIA 3/8 SH 0.3750 LOC 1.1250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

ICE-NFE-0375-2-3-1125-BN-RND-BRITE-L-VPH DIA 3/8 SH 0.3750 LOC 1.1250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 34388 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

MELIN 34388 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 65305 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

MELIN 65305 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 46547 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 46547 DIA 1/2 SH 0.50 LOC 0.6250 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 64815 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

MELIN 64815 DIA 10MM SH 0.3937 LOC 0.9449 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 43308 DIA 6MM SH 0.2362 LOC 0.5118 OAL 2.4803 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0079 0.20MM

MELIN 43308 DIA 6MM SH 0.2362 LOC 0.5118 OAL 2.4803 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0079 0.20MM

Call (262) 251-4020 for pricing
Picture of MELIN 34408 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34408 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 19543 DIA 16MM SH 0.6299 LOC 1.9685 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

MELIN 19543 DIA 16MM SH 0.6299 LOC 1.9685 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0197 0.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 62967 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 62967 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 34390 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34390 DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of INGERSOLL S025T15DA050-01 SH 0.9843 OAL 5.3150 Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End CHIPSURFER

INGERSOLL S025T15DA050-01 SH 0.9843 OAL 5.3150 Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End CHIPSURFER

Call (262) 251-4020 for pricing
Picture of MELIN 47781 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 47781 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 45281 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45281 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 3.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 43327 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 43327 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.9370 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 60710 DIA 5/8 SH 0.6250 LOC 4.00 OAL 6.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60710 DIA 5/8 SH 0.6250 LOC 4.00 OAL 6.1250 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 19544 DIA 16MM SH 0.6299 LOC 1.9685 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

MELIN 19544 DIA 16MM SH 0.6299 LOC 1.9685 OAL 5.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-05-2-4-2-BN-RND-BRITE-L-VPH DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

ICE-NFE-05-2-4-2-BN-RND-BRITE-L-VPH DIA 1/2 SH 0.50 LOC 2.00 OAL 4.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 34572 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34572 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 65335 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

MELIN 65335 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 49281 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 49281 DIA 3/4 SH 0.7500 LOC 1.00 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 64828 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 64828 DIA 20MM SH 0.7874 LOC 1.4961 OAL 3.9370 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 43334 DIA 12MM SH 0.4724 LOC 1.0236 OAL 4.9213 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 43334 DIA 12MM SH 0.4724 LOC 1.0236 OAL 4.9213 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 34423 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34423 DIA 1-1/4 SH 1.2500 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 19582 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

MELIN 19582 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 63322 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

MELIN 63322 DIA 10MM SH 0.3937 LOC 0.8661 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0591 1.50MM

Call (262) 251-4020 for pricing
Picture of MELIN 34580 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 34580 DIA 1-1/2 SH 1.2500 LOC 3.00 OAL 5.50 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of INGERSOLL 47B-5037T8RQ06 IN2006 DIA 1/2 SH T08 LOC 0.50End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose CHIPSURFER

INGERSOLL 47B-5037T8RQ06 IN2006 DIA 1/2 SH T08 LOC 0.50End Mill,Replacable Head Standard Flute Variable Helix Carbide TiAlN Single End Ball Nose CHIPSURFER

Call (262) 251-4020 for pricing
Picture of MELIN 49305 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

MELIN 49305 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0100 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 45282 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

MELIN 45282 DIA 1/8 SH 0.1250 LOC 0.3750 OAL 1.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0050 0.13MM

Call (262) 251-4020 for pricing
Picture of MELIN 43626 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

MELIN 43626 DIA 16MM SH 0.6299 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0787 2.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 60716 DIA 1 SH 1.00 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

MELIN 60716 DIA 1 SH 1.00 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 19583 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

MELIN 19583 DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of ICE-NFE-01875-3-3-1125-SQ-RND-BRITE-EL-VPH DIA 3/16 SH 0.1875 LOC 1.1250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Single End Square Sharp Green

ICE-NFE-01875-3-3-1125-SQ-RND-BRITE-EL-VPH DIA 3/16 SH 0.1875 LOC 1.1250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide Single End Square Sharp Green

Call (262) 251-4020 for pricing
Picture of MELIN 34614 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34614 DIA 1-1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 65345 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 65345 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 49326 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 49326 DIA 1 SH 1.00 LOC 1.2500 OAL 4.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 64859 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 64859 DIA 3/8 SH 0.3750 LOC 0.50 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 43631 DIA 18MM SH 0.7087 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

MELIN 43631 DIA 18MM SH 0.7087 LOC 1.2598 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0098 0.25MM

Call (262) 251-4020 for pricing
Picture of MELIN 34571 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34571 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 33132 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 33132 DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 63324 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9921 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 63324 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9921 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 34627 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

MELIN 34627 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of INGERSOLL S037T06CA-20 SH 0.3750 OAL 4.7500 Replacable Head Acc. Straight Neck/Cylicrical Shank Carbide Single End CHIPSURFER

INGERSOLL S037T06CA-20 SH 0.3750 OAL 4.7500 Replacable Head Acc. Straight Neck/Cylicrical Shank Carbide Single End CHIPSURFER

Call (262) 251-4020 for pricing
Picture of MELIN 49394 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

MELIN 49394 DIA 1 SH 1.00 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45301 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 45301 DIA 3/16 SH 0.1875 LOC 0.2500 OAL 2.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 43715 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

MELIN 43715 DIA 20MM SH 0.7874 LOC 1.4961 OAL 5.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 61645 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

MELIN 61645 DIA 5/8 SH 0.6250 LOC 1.6250 OAL 3.7500 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing
Picture of MELIN 33342 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Cobalt nACRoA Single End 45.0° Chamfer

MELIN 33342 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Cobalt nACRoA Single End 45.0° Chamfer

Call (262) 251-4020 for pricing
Picture of ICE-NFE-1-3-6-3-BN-RND-BRITE-EL-VPH DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

ICE-NFE-1-3-6-3-BN-RND-BRITE-EL-VPH DIA 1 SH 1.00 LOC 3.00 OAL 6.00 End Mill Standard Flute Variable Helix Carbide Single End Ball Nose Green

Call (262) 251-4020 for pricing
Picture of MELIN 34655 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

MELIN 34655 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.1900 4.83MM

Call (262) 251-4020 for pricing
Picture of MELIN 65353 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

MELIN 65353 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 49991 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

MELIN 49991 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 64866 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

MELIN 64866 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 44163 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

MELIN 44163 DIA 1-1/4 SH 1.2500 LOC 1.2500 OAL 6.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of MELIN 34625 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

MELIN 34625 DIA 2 SH 2.00 LOC 3.00 OAL 6.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 340560 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

MELIN 340560 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 63628 DIA 18MM SH 0.7087 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

MELIN 63628 DIA 18MM SH 0.7087 LOC 1.2598 OAL 3.9370 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0394 1.00MM

Call (262) 251-4020 for pricing
Picture of MELIN 361200 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

MELIN 361200 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0900 2.29MM

Call (262) 251-4020 for pricing
Picture of INGERSOLL 48N16010TRRA60 IN2005 DIA 16MM SH T10 LOC 0.6299 Countersink,Replacable Head Carbide TiAlN Single End Countersink CHIPSURFER

INGERSOLL 48N16010TRRA60 IN2005 DIA 16MM SH T10 LOC 0.6299 Countersink,Replacable Head Carbide TiAlN Single End Countersink CHIPSURFER

Call (262) 251-4020 for pricing
Picture of MELIN 51704 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM

MELIN 51704 DIA 1/4 SH 0.2500 LOC 0.7500 OAL 2.50 End Mill Standard Flute High Helix Carbide AlTiN Single End Corner Radius 0.0150 0.38MM

Call (262) 251-4020 for pricing
Picture of MELIN 45343 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

MELIN 45343 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 2.50 End Mill Standard Flute High Helix Carbide TiCN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 44370 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

MELIN 44370 DIA 1/4 SH 0.2500 LOC 1.2500 OAL 3.00 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 61777 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

MELIN 61777 DIA 3/8 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.0070 0.18MM

Call (262) 251-4020 for pricing
Picture of MELIN 340570 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 340570 DIA 1/8 SH 0.1250 LOC 0.2500 OAL 1.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of ICE-NFE-1-3-4-15-030-RND-DLC-R-VPH DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide DLC Single End Corner Radius 0.0300 0.76MM Green

ICE-NFE-1-3-4-15-030-RND-DLC-R-VPH DIA 1 SH 1.00 LOC 1.50 OAL 4.00 End Mill Standard Flute Variable Helix Carbide DLC Single End Corner Radius 0.0300 0.76MM Green

Call (262) 251-4020 for pricing
Picture of MELIN 361210 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

MELIN 361210 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of MELIN 65365 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

MELIN 65365 DIA 1/4 SH 0.2500 LOC 0.3750 OAL 4.00 End Mill Standard Flute High Helix Carbide ZrN Single End Corner Radius 0.0300 0.76MM

Call (262) 251-4020 for pricing
Picture of MELIN 54707 DIA 1/16 SH 0.1250 LOC 0.1875 OAL 1.50 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp

MELIN 54707 DIA 1/16 SH 0.1250 LOC 0.1875 OAL 1.50 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of MELIN 64877 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

MELIN 64877 DIA 1/2 SH 0.50 LOC 0.6250 OAL 5.00 End Mill Standard Flute Standard Helix Carbide ZrN Single End Corner Radius 0.1200 3.05MM

Call (262) 251-4020 for pricing
Picture of MELIN 44375 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

MELIN 44375 DIA 3/8 SH 0.3750 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiCN Single End Corner Radius 0.0600 1.52MM

Call (262) 251-4020 for pricing
Picture of MELIN 34656 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

MELIN 34656 DIA 2 SH 2.00 LOC 6.00 OAL 9.7500 End Mill Standard Flute Standard Helix Cobalt nACRoA Single End Corner Radius 0.2500 6.35MM

Call (262) 251-4020 for pricing
Picture of MELIN 341140 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

MELIN 341140 DIA 1/4 SH 0.2500 LOC 0.50 OAL 2.50 End Mill Standard Flute Standard Helix Carbide TiXCo Single End Corner Radius 0.0200 0.51MM

Call (262) 251-4020 for pricing