Hole Making

Sort by
Picture of TUNGALOY TDXU-1125FS-04 1-1/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1125FS-04 1-1/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1125FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX300F32-4 30mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX300F32-4 30mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX300F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX290F32-4 29mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX290F32-4 29mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX290F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX270F32-4 27mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX270F32-4 27mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX270F32-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX260F25-4 26mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX260F25-4 26mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX260F25-4

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3000150N6R01 1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body

INGERSOLL LD3000150N6R01 1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body

ISO: LD3000150N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD2900145N6R01 1.1417 (29.0 mm)-1.1772 (29.9 mm) SpadeTwist Body

INGERSOLL LD2900145N6R01 1.1417 (29.0 mm)-1.1772 (29.9 mm) SpadeTwist Body

ISO: LD2900145N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD2800140N6R01 1.1024 (28.0 mm)-1.1378 (28.9 mm) SpadeTwist Body

INGERSOLL LD2800140N6R01 1.1024 (28.0 mm)-1.1378 (28.9 mm) SpadeTwist Body

ISO: LD2800140N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD2900145JGR00 1.1417 (29.0 mm)-1.1772 (29.9 mm) SpadeTwist Body

INGERSOLL LD2900145JGR00 1.1417 (29.0 mm)-1.1772 (29.9 mm) SpadeTwist Body

ISO: LD2900145JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD2800140JGR00 1.1024 (28.0 mm)-1.1378 (28.9 mm) SpadeTwist Body

INGERSOLL LD2800140JGR00 1.1024 (28.0 mm)-1.1378 (28.9 mm) SpadeTwist Body

ISO: LD2800140JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3000150JGR00 1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body

INGERSOLL LD3000150JGR00 1.1811 (30.0 mm)-1.2165 (30.9 mm) SpadeTwist Body

ISO: LD3000150JGR00

Call (262) 251-4020 for pricing
Picture of PARLEC PC6-4606 Boring Head Twin Bore

PARLEC PC6-4606 Boring Head Twin Bore

ANSI: PC6-4606

ISO: PC6-4606

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1024-512-125A-5D 1.024" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 1024-512-125A-5D 1.024" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 1024-512-125A-5D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1260-378-150A-3D 1.26" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1260-378-150A-3D 1.26" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1260-378-150A-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1220-366-150A-3D 1.22" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1220-366-150A-3D 1.22" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1220-366-150A-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1260-378-125A-3D 1.26" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1260-378-125A-3D 1.26" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1260-378-125A-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1220-366-125A-3D 1.22" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1220-366-125A-3D 1.22" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1220-366-125A-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0984-492-125A-5D 0.984" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR DCN 0984-492-125A-5D 0.984" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: DCN 0984-492-125A-5D

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Machine Taper Flange Mount 3.543

INGERSOLL Hole Making Mill Boring Boring Head Machine Taper Flange Mount 3.543

ISO: DIN2079-40.63

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR13.50XM25-20 13.5mm Drill body for lathes and machining centers, L/D = 20

TUNGALOY MCTR13.50XM25-20 13.5mm Drill body for lathes and machining centers, L/D = 20

ISO: MCTR13.50XM25-20

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR12.50XM20-20 12.5mm Drill body for lathes and machining centers, L/D = 20

TUNGALOY MCTR12.50XM20-20 12.5mm Drill body for lathes and machining centers, L/D = 20

ISO: MCTR12.50XM20-20

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR13.00XM25-20 13mm Drill body for lathes and machining centers, L/D = 20

TUNGALOY MCTR13.00XM25-20 13mm Drill body for lathes and machining centers, L/D = 20

ISO: MCTR13.00XM25-20

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR12.00XM20-20 12mm Drill body for lathes and machining centers, L/D = 20

TUNGALOY MCTR12.00XM20-20 12mm Drill body for lathes and machining centers, L/D = 20

ISO: MCTR12.00XM20-20

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Machine Taper HSK63

INGERSOLL Hole Making Mill Boring Boring Head Machine Taper HSK63

ISO: HSK-A63MHD63.75

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Boring Bar Boring Bar 0.629 Carbide

INGERSOLL Hole Making Mill Boring Boring Head Boring Bar Boring Bar 0.629 Carbide

ISO: B8.06

Call (262) 251-4020 for pricing
Picture of PARLEC PC7-17BR2 Boring Head Chamfer Ring

PARLEC PC7-17BR2 Boring Head Chamfer Ring

ANSI: PC7-17BR2

ISO: PC7-17BR2

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0349070N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0349070N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0349070N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0357071N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0357071N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0357071N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0341068N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0341068N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0341068N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0365073N6R01 1.437 (36.50 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0365073N6R01 1.437 (36.50 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0365073N6R01

Call (262) 251-4020 for pricing
Picture of PARLEC H100A-PC6-100 Boring Head Machine Taper

PARLEC H100A-PC6-100 Boring Head Machine Taper

ANSI: H100A-PC6-100

ISO: H100A-PC6-100

Call (262) 251-4020 for pricing
Picture of PARLEC H100A-PC5-122 Boring Head Machine Taper

PARLEC H100A-PC5-122 Boring Head Machine Taper

ANSI: H100A-PC5-122

ISO: H100A-PC5-122

Call (262) 251-4020 for pricing
Picture of PARLEC H100A-PC4-65 Boring Head Machine Taper

PARLEC H100A-PC4-65 Boring Head Machine Taper

ANSI: H100A-PC4-65

ISO: H100A-PC4-65

Call (262) 251-4020 for pricing
Picture of PARLEC H100A-PC4-182 Boring Head Machine Taper

PARLEC H100A-PC4-182 Boring Head Machine Taper

ANSI: H100A-PC4-182

ISO: H100A-PC4-182

Call (262) 251-4020 for pricing
Picture of PARLEC H100A-PC3-122 Boring Head Machine Taper

PARLEC H100A-PC3-122 Boring Head Machine Taper

ANSI: H100A-PC3-122

ISO: H100A-PC3-122

Call (262) 251-4020 for pricing
Picture of PARLEC H100A-PC2-107 Boring Head Machine Taper

PARLEC H100A-PC2-107 Boring Head Machine Taper

ANSI: H100A-PC2-107

ISO: H100A-PC2-107

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0405122N6R02 1.594 (40.49 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0405122N6R02 1.594 (40.49 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0405122N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0397119N6R02 1.562 (39.67 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0397119N6R02 1.562 (39.67 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0397119N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0389117N6R02 1.531 (38.89 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0389117N6R02 1.531 (38.89 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0389117N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0381114N6R02 1.500 (38.10 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0381114N6R02 1.500 (38.10 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0381114N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0373112N6R02 1.468 (37.29 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0373112N6R02 1.468 (37.29 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0373112N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0400120JGR00 1.575 (40.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0400120JGR00 1.575 (40.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0400120JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0390117JGR00 1.535 (39.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0390117JGR00 1.535 (39.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0390117JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0380114JGR00 1.496 (38.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0380114JGR00 1.496 (38.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0380114JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0370111JGR00 1.457 (37.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0370111JGR00 1.457 (37.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0370111JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0333100N6R01 1.312 (33.32 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0333100N6R01 1.312 (33.32 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0333100N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0325098N6R01 1.281 (32.54 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0325098N6R01 1.281 (32.54 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0325098N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0318095N6R01 1.252 (31.80 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0318095N6R01 1.252 (31.80 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0318095N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0310093N6R01 1.219 (30.96 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0310093N6R01 1.219 (30.96 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0310093N6R01

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM2550UPowder Metal TDM Insert BLADE UP(M) D=25.50

WIDIA/KENNAMETAL TDM2550UPowder Metal TDM Insert BLADE UP(M) D=25.50

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0875FS-05 7/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0875FS-05 7/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0875FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0812FS-05 0.812" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

TUNGALOY TDXU-0812FS-05 0.812" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 5, Flat cotter

ISO: TDXU-0812FS-05

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX225F25-5 22.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX225F25-5 22.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX225F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX220F25-5 22mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX220F25-5 22mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX220F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX215F25-5 21.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX215F25-5 21.5mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX215F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX210F25-5 21mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

TUNGALOY TDX210F25-5 21mm TungDrill Twisted Indexable Insert Drill s, L/D=5, Flat cotter

ISO: TDX210F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1417F1500-3 1.417" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1417F1500-3 1.417" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1417F1500-3

Call (262) 251-4020 for pricing
Picture of ZCC ZTD04-2.000"-XP1.50"-SP14-02 2.000" DIA Square Insert Drill

ZCC ZTD04-2.000"-XP1.50"-SP14-02 2.000" DIA Square Insert Drill

Call (262) 251-4020 for pricing
Picture of ISCAR MD-DFN 1378 HEAD 1.378" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISCAR MD-DFN 1378 HEAD 1.378" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISO: MD-DFN 1378 HEAD

Call (262) 251-4020 for pricing
Picture of ISCAR MD-DFN 1339 HEAD 1.339" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISCAR MD-DFN 1339 HEAD 1.339" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISO: MD-DFN 1339 HEAD

Call (262) 251-4020 for pricing
Picture of ISCAR MD-DFN 1299 HEAD 1.299" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISCAR MD-DFN 1299 HEAD 1.299" Exchangeable Drill ing Heads Carrying CHAMIQDrill Solid Carbide Inserts

ISO: MD-DFN 1299 HEAD

Call (262) 251-4020 for pricing
Picture of ISCAR MNCNT 130-400-MF16X1-T2 0.512" Indexable SUMOCHAM Inserts and Modular Shank GunDrill s

ISCAR MNCNT 130-400-MF16X1-T2 0.512" Indexable SUMOCHAM Inserts and Modular Shank GunDrill s

ISO: MNCNT 130-400-MF16X1-T2

Call (262) 251-4020 for pricing
Picture of PARLEC 910-1360 Boring Head Finish Boring Head Large Diameter

PARLEC 910-1360 Boring Head Finish Boring Head Large Diameter

ANSI: 910-1360

ISO: 910-1360

Call (262) 251-4020 for pricing
Picture of ISCAR DR1437-2875-150-12-2D-N 1.437" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1437-2875-150-12-2D-N 1.437" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1437-2875-150-12-2D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1375-2750-150-12-2D-N 1-3/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1375-2750-150-12-2D-N 1-3/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1375-2750-150-12-2D-N

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3800114N6R01 1.4961 (38.0 mm)-1.5315 (38.9 mm) SpadeTwist Body

INGERSOLL LD3800114N6R01 1.4961 (38.0 mm)-1.5315 (38.9 mm) SpadeTwist Body

ISO: LD3800114N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3700111N6R01 1.4567 (37.0 mm)-1.4921 (37.9 mm) SpadeTwist Body

INGERSOLL LD3700111N6R01 1.4567 (37.0 mm)-1.4921 (37.9 mm) SpadeTwist Body

ISO: LD3700111N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3600108N6R01 1.4173 (36.0 mm)-1.4528 (36.9 mm) SpadeTwist Body

INGERSOLL LD3600108N6R01 1.4173 (36.0 mm)-1.4528 (36.9 mm) SpadeTwist Body

ISO: LD3600108N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3800114JHR00 1.4961 (38.0 mm)-1.5315 (38.9 mm) SpadeTwist Body

INGERSOLL LD3800114JHR00 1.4961 (38.0 mm)-1.5315 (38.9 mm) SpadeTwist Body

ISO: LD3800114JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3700111JHR00 1.4567 (37.0 mm)-1.4921 (37.9 mm) SpadeTwist Body

INGERSOLL LD3700111JHR00 1.4567 (37.0 mm)-1.4921 (37.9 mm) SpadeTwist Body

ISO: LD3700111JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3600108JHR00 1.4173 (36.0 mm)-1.4528 (36.9 mm) SpadeTwist Body

INGERSOLL LD3600108JHR00 1.4173 (36.0 mm)-1.4528 (36.9 mm) SpadeTwist Body

ISO: LD3600108JHR00

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1312-02 1.312" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1312-02 1.312" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1312-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1250-02 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

TUNGALOY TDSU1250-02 1-1/4" TungSix-Drill Indexable Insert Drill s, L/D=2, Whistle notch

ISO: TDSU1250-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS330F40-2 33mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS330F40-2 33mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS330F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS320F32-2 32mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS320F32-2 32mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS320F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS310F32-2 31mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS310F32-2 31mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS310F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1312FS-02 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1312FS-02 1.312" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1312FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1250FS-02 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-1250FS-02 1-1/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-1250FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX330F40-2 33mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX330F40-2 33mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX330F40-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX320F32-2 32mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX320F32-2 32mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX320F32-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX310F32-2 31mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX310F32-2 31mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX310F32-2

Call (262) 251-4020 for pricing
Picture of ISCAR DFN 1535-460-125A-3D-IQ 1.535" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DFN 1535-460-125A-3D-IQ 1.535" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DFN 1535-460-125A-3D-IQ

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0827-661-100A-8D 0.827" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISCAR DCN 0827-661-100A-8D 0.827" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISO: DCN 0827-661-100A-8D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0866-693-100A-8D 0.866" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISCAR DCN 0866-693-100A-8D 0.866" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISO: DCN 0866-693-100A-8D

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0445089N7R02 1.750 (44.45 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0445089N7R02 1.750 (44.45 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0445089N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0437087N7R02 1.719 (43.66 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0437087N7R02 1.719 (43.66 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0437087N7R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0428086N6R02 1.687 (42.85 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0428086N6R02 1.687 (42.85 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0428086N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0413083N6R02 1.625 (41.28 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0413083N6R02 1.625 (41.28 mm) Square Insert Indexable Drill s - Inch|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0413083N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0440088JHR00 1.732 (44.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0440088JHR00 1.732 (44.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0440088JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0430086JHR00 1.693 (43.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0430086JHR00 1.693 (43.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0430086JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0420084JHR00 1.654 (42.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0420084JHR00 1.654 (42.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0420084JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0410082JHR00 1.614 (41.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0410082JHR00 1.614 (41.00 mm) Square Insert Indexable Drill s - Metric|L:D Ratio - 2:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0410082JHR00

Call (262) 251-4020 for pricing
Picture of ISCAR DR1312-3936-125-09-3D-N 1.312" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1312-3936-125-09-3D-N 1.312" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1312-3936-125-09-3D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1281-3843-125-09-3D-N 1.281" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1281-3843-125-09-3D-N 1.281" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1281-3843-125-09-3D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1250-3750-125-09-3D-N 1-1/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1250-3750-125-09-3D-N 1-1/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1250-3750-125-09-3D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DR1219-3657-125-09-3D-N 1.219" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR1219-3657-125-09-3D-N 1.219" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR1219-3657-125-09-3D-N

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0945-756-125R-8D 0.945" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0945-756-125R-8D 0.945" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0945-756-125R-8D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0906-724-125R-8D 0.906" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0906-724-125R-8D 0.906" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0906-724-125R-8D

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR13.49XU25.4-15 0.5311" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR13.49XU25.4-15 0.5311" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR13.49XU25.4-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR12.70XU25.4-15 1/2" Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR12.70XU25.4-15 1/2" Drill body for lathes and machining centers, L/D = 15

ISO: MCTR12.70XU25.4-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR13.50XM25-15 13.5mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR13.50XM25-15 13.5mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR13.50XM25-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR12.50XM20-15 12.5mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR12.50XM20-15 12.5mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR12.50XM20-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR13.00XM25-15 13mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR13.00XM25-15 13mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR13.00XM25-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY MCTR12.00XM20-15 12mm Drill body for lathes and machining centers, L/D = 15

TUNGALOY MCTR12.00XM20-15 12mm Drill body for lathes and machining centers, L/D = 15

ISO: MCTR12.00XM20-15

Call (262) 251-4020 for pricing
Picture of TUNGALOY C4TDX250L125-3 25mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C4TDX250L125-3 25mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C4TDX250L125-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY C6TDX250L121-3 25mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

TUNGALOY C6TDX250L121-3 25mm TungDrill Twisted Indexable Insert Drill s with "TungCap" Exchangeable Shanks, L/D=3

ISO: C6TDX250L121-3

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0984R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

WIDIA/KENNAMETAL TDM0984R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0945R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

WIDIA/KENNAMETAL TDM0945R8SCF100 TDM1 Drill BODY INCH SCF 8XD D

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM250R8SCF25M TDM1 SCF Drill BODY 8XD D=25.0

WIDIA/KENNAMETAL TDM250R8SCF25M TDM1 SCF Drill BODY 8XD D=25.0

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM240R8SCF25M TDM1 SCF Drill BODY 8XD D=24.0

WIDIA/KENNAMETAL TDM240R8SCF25M TDM1 SCF Drill BODY 8XD D=24.0

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1181-354-150A-3D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1181-354-150A-3D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1181-354-150A-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1142-342-150A-3D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1142-342-150A-3D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1142-342-150A-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1181-354-125A-3D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1181-354-125A-3D 1.181" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1181-354-125A-3D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1142-342-125A-3D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 1142-342-125A-3D 1.142" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 1142-342-125A-3D

Call (262) 251-4020 for pricing
Picture of INGERSOLL 4508246 Mill Boring Quick Change PSC "Capt0 Type"8

INGERSOLL 4508246 Mill Boring Quick Change PSC "Capt0 Type"8

ISO: PSC80-MHD63.150

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Mill Bore Cartridge PC12.50 Steel

INGERSOLL Hole Making Mill Boring Boring Head Mill Bore Cartridge PC12.50 Steel

ISO: PC12.50

Call (262) 251-4020 for pricing
Picture of ISCAR DCM 0984-787-100A-8D 0.984 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISCAR DCM 0984-787-100A-8D 0.984 Indexable Head Drill s with One Flat Shank, Drill ing Depth 8xD

ISO: DCM 0984-787-100A-8D

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Machine Taper HSK80

INGERSOLL Hole Making Mill Boring Boring Head Machine Taper HSK80

ISO: HSK-A80MHD50.70

Call (262) 251-4020 for pricing
Picture of DIJET SEC-2150-2.5-S125 Milling Cutter 90.0°, Drill Mill 1.500 Cutter Diameter Weldon 1.250 Shank 6.500 OAL 6 Flute

DIJET SEC-2150-2.5-S125 Milling Cutter 90.0°, Drill Mill 1.500 Cutter Diameter Weldon 1.250 Shank 6.500 OAL 6 Flute

ANSI: SEC-2150-2.5-S125

ISO: SEC-2150-2.5-S125

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1102-551-125R-5D 1.102" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISCAR DCN 1102-551-125R-5D 1.102" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISO: DCN 1102-551-125R-5D

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1063-531-125R-5D 1.063" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISCAR DCN 1063-531-125R-5D 1.063" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISO: DCN 1063-531-125R-5D

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1142R5SL125 TDMX Drill BODY D1.142 5XD SL

WIDIA/KENNAMETAL TDMX1142R5SL125 TDMX Drill BODY D1.142 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1103R5SL125 TDMX Drill BODY D1.103 5XD SL

WIDIA/KENNAMETAL TDMX1103R5SL125 TDMX Drill BODY D1.103 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX290R5SL32M TDMX Drill BODY D=29MM 5XD SL

WIDIA/KENNAMETAL TDMX290R5SL32M TDMX Drill BODY D=29MM 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX280R5SL32M TDMX Drill BODY D=28MM 5XD SL

WIDIA/KENNAMETAL TDMX280R5SL32M TDMX Drill BODY D=28MM 5XD SL

Call (262) 251-4020 for pricing
Picture of INGERSOLL 416500105038F Hole Making Mill Boring Boring Head Machine Taper BT50

INGERSOLL 416500105038F Hole Making Mill Boring Boring Head Machine Taper BT50

ANSI: 416500105038F

ISO: MAS403-BT50FCADBMHD50.120

Call (262) 251-4020 for pricing
Picture of INGERSOLL TD2400192U7R00 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

INGERSOLL TD2400192U7R00 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

ISO: TD2400192U7R00

Call (262) 251-4020 for pricing
Picture of INGERSOLL TD2300184U7R00 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

INGERSOLL TD2300184U7R00 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

ISO: TD2300184U7R00

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1378F1500-3 1.378" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1378F1500-3 1.378" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1378F1500-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1339F1500-3 1.339" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1339F1500-3 1.339" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1339F1500-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1299F1500-3 1.299" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1299F1500-3 1.299" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1299F1500-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1260F1500-3 1.26" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1260F1500-3 1.26" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1260F1500-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TISU1220F1250-3 1.22" Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TISU1220F1250-3 1.22" Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TISU1220F1250-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS350F40-3 35mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS350F40-3 35mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS350F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS340F40-3 34mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS340F40-3 34mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS340F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS330F40-3 33mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS330F40-3 33mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS330F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS320F40-3 32mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS320F40-3 32mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS320F40-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIS310F32-3 31mm Drill ForceMeister TIS L/D=3 Indexable head Drill

TUNGALOY TIS310F32-3 31mm Drill ForceMeister TIS L/D=3 Indexable head Drill

ISO: TIS310F32-3

Call (262) 251-4020 for pricing
Picture of ZCC ZTD03-2.000"-XP1.50"-SP14-02 2.000" DIA Square Insert Drill

ZCC ZTD03-2.000"-XP1.50"-SP14-02 2.000" DIA Square Insert Drill

Call (262) 251-4020 for pricing
Picture of INGERSOLL YD2500125C8R01 0.9843 (25.0 mm) QwikTwist Body

INGERSOLL YD2500125C8R01 0.9843 (25.0 mm) QwikTwist Body

ISO: YD2500125C8R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0341102N6R01 1.343 (34.11 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0341102N6R01 1.343 (34.11 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0341102N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0333100N6R01 1.312 (33.32 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0333100N6R01 1.312 (33.32 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0333100N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0318095N6R01 1.252 (31.80 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0318095N6R01 1.252 (31.80 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0318095N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0365110N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0365110N6R02 1.437 (36.50 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0365110N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0357107N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0357107N6R02 1.406 (35.71 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0357107N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0349105N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0349105N6R02 1.375 (34.93 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0349105N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0341102N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0341102N6R02 1.343 (34.11 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0341102N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0360108JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0360108JGR00 1.417 (36.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0360108JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0350105JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0350105JGR00 1.378 (35.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0350105JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0340102JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0340102JGR00 1.339 (34.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0340102JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0325098N6R01 1.281 (32.54 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0325098N6R01 1.281 (32.54 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0325098N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QF0310093N6R01 1.219 (30.96 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

INGERSOLL QF0310093N6R01 1.219 (30.96 mm) Flat Bottom Square Insert Indexable Drill - 3:1|L:D Ratio - 3:1|

ISO: QF0310093N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0280112JFR00 1.102 (28.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0280112JFR00 1.102 (28.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0280112JFR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0270108JFR00 1.063 (27.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0270108JFR00 1.063 (27.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0270108JFR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0302120N6R02 1.187 (30.15 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0302120N6R02 1.187 (30.15 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0302120N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0294118N6R02 1.156 (29.36 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0294118N6R02 1.156 (29.36 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0294118N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0286114N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0286114N6R02 1.125 (28.58 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0286114N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0278111N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0278111N6R02 1.094 (27.79 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0278111N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0270108N6R02 1.063 (27.00 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0270108N6R02 1.063 (27.00 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0270108N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0262105N6R02 1.031 (26.19 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0262105N6R02 1.031 (26.19 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0262105N6R02

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0260104JFR00 1.024 (26.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0260104JFR00 1.024 (26.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0260104JFR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0300120JGR00 1.181 (30.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0300120JGR00 1.181 (30.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0300120JGR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0290116JGR00 1.142 (29.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0290116JGR00 1.142 (29.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0290116JGR00

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0787R1000-12 0.787" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0787R1000-12 0.787" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0787R1000-12

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0748R1000-12 0.748" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0748R1000-12 0.748" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0748R1000-12

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID200R25-12 20mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID200R25-12 20mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID200R25-12

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID190R25-12 19mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID190R25-12 19mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID190R25-12

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1062F-3 1.062" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU1062F-3 1.062" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU1062F-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU1000F-3 1" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDSU1000F-3 1" TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDSU1000F-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS270F32-3 27mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS270F32-3 27mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS270F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS265F32-3 26.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS265F32-3 26.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS265F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS264F32-3 26.4mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS264F32-3 26.4mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS264F32-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS260F25-3 26mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS260F25-3 26mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS260F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS255F25-3 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS255F25-3 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS255F25-3

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Shank Cylindrical 0.625 Carbide

INGERSOLL Hole Making Mill Boring Boring Head Shank Cylindrical 0.625 Carbide

ISO: BMD5/8-16.110

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDSU0937F-4 0.938" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDSU0937F-4 0.938" TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDSU0937F-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS255F25-4 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS255F25-4 25.5mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS255F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS250F25-4 25mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS250F25-4 25mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS250F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS240F25-4 24mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS240F25-4 24mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS240F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS230F25-4 23mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDS230F25-4 23mm TungSix-Drill Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDS230F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0937FS-04 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-0937FS-04 0.937" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-0937FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-1000FS-04 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

TUNGALOY TDXU-1000FS-04 1" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 4, Flat cotter

ISO: TDXU-1000FS-04

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX250F25-4 25mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX250F25-4 25mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX250F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX245F25-4 24.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX245F25-4 24.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX245F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX240F25-4 24mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX240F25-4 24mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX240F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX235F25-4 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX235F25-4 23.5mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX235F25-4

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX230F25-4 23mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

TUNGALOY TDX230F25-4 23mm TungDrill Twisted Indexable Insert Drill s, L/D=4, Flat cotter

ISO: TDX230F25-4

Call (262) 251-4020 for pricing
Picture of PARLEC 910-RES Boring Head Finish Boring Head Large Diameter

PARLEC 910-RES Boring Head Finish Boring Head Large Diameter

ANSI: 910-RES

ISO: 910-RES

Call (262) 251-4020 for pricing
Picture of INGERSOLL BTSI022-L62.99 0.866 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI022-L62.99 0.866 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI022-L62.99

Call (262) 251-4020 for pricing
Picture of INGERSOLL CHA-1.156 1.156 BTA Brazed Adapter|Single tube cross hole adapter|.437-2.559" (11.1-65.0 mm)|

INGERSOLL CHA-1.156 1.156 BTA Brazed Adapter|Single tube cross hole adapter|.437-2.559" (11.1-65.0 mm)|

ISO: CHA-1.156

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD2700135N6R01 1.0630 (27.0 mm)-1.0984 (27.9 mm) SpadeTwist Body

INGERSOLL LD2700135N6R01 1.0630 (27.0 mm)-1.0984 (27.9 mm) SpadeTwist Body

ISO: LD2700135N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD2600130N6R01 1.0236 (26.0 mm)-1.0591 (26.9 mm) SpadeTwist Body

INGERSOLL LD2600130N6R01 1.0236 (26.0 mm)-1.0591 (26.9 mm) SpadeTwist Body

ISO: LD2600130N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3500105N6R01 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

INGERSOLL LD3500105N6R01 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

ISO: LD3500105N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3400102N6R01 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

INGERSOLL LD3400102N6R01 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

ISO: LD3400102N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3300099N6R01 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

INGERSOLL LD3300099N6R01 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

ISO: LD3300099N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3200096N6R01 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

INGERSOLL LD3200096N6R01 1.2598 (32.0 mm)-1.2953 (32.9 mm) SpadeTwist Body

ISO: LD3200096N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3100093N6R01 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

INGERSOLL LD3100093N6R01 1.2205 (31.0 mm)-1.2559 (31.9 mm) SpadeTwist Body

ISO: LD3100093N6R01

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3500105JHR00 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

INGERSOLL LD3500105JHR00 1.3780 (35.0 mm)-1.4134 (35.9 mm) SpadeTwist Body

ISO: LD3500105JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3400102JHR00 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

INGERSOLL LD3400102JHR00 1.3386 (34.0 mm)-1.3740 (34.9 mm) SpadeTwist Body

ISO: LD3400102JHR00

Call (262) 251-4020 for pricing
Picture of INGERSOLL LD3300099JHR00 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

INGERSOLL LD3300099JHR00 1.2992 (33.0 mm)-1.3346 (33.9 mm) SpadeTwist Body

ISO: LD3300099JHR00

Call (262) 251-4020 for pricing