Hole Making

Sort by
Picture of INGERSOLL BTSI016-L62.99 0.63 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI016-L62.99 0.63 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI016-L62.99

$581.88
Picture of INGERSOLL BTSI012-L62.99 0.472 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI012-L62.99 0.472 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI012-L62.99

$581.88
Picture of INGERSOLL BTSI018-L62.99 0.709 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI018-L62.99 0.709 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI018-L62.99

$581.88
Picture of INGERSOLL BTSI015-L62.99 0.591 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI015-L62.99 0.591 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI015-L62.99

$581.88
Picture of INGERSOLL BTSI014-L62.99 0.551 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI014-L62.99 0.551 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI014-L62.99

$581.88
Picture of INGERSOLL BTSI013-L62.99 0.512 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI013-L62.99 0.512 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI013-L62.99

$581.88
Picture of INGERSOLL BTSI017-L62.99 0.669 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

INGERSOLL BTSI017-L62.99 0.669 BTA STS Tubes|Single tube system|.433-2.205" (11.0-56 mm)|

ISO: BTSI017-L62.99

$581.88
Picture of ISCAR D3N 0866-260-100A-3D 0.866" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR D3N 0866-260-100A-3D 0.866" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: D3N 0866-260-100A-3D

$581.76
Picture of ISCAR D3N 0827-248-100A-3D 0.827" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR D3N 0827-248-100A-3D 0.827" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: D3N 0827-248-100A-3D

$581.76
Picture of TUNGALOY TDSU0812F-2 0.812" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDSU0812F-2 0.812" TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDSU0812F-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS225F25-2 22.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS225F25-2 22.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS225F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS220F25-2 22mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS220F25-2 22mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS220F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS215F25-2 21.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS215F25-2 21.5mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS215F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS210F25-2 21mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDS210F25-2 21mm TungSix-Drill Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDS210F25-2

Call (262) 251-4020 for pricing
Picture of PARLEC PC5-4505 Boring Head Twin Bore

PARLEC PC5-4505 Boring Head Twin Bore

ANSI: PC5-4505

ISO: PC5-4505

Call (262) 251-4020 for pricing
Picture of K-Tool FB-2375 Multi Insert Drill 2.375 Cutter Diameter 2.000 Weldon

K-Tool FB-2375 Multi Insert Drill 2.375 Cutter Diameter 2.000 Weldon

ANSI: FB-2375

ISO: FB-2375

Call (262) 251-4020 for pricing
Picture of ISCAR D3N 0945-283-125R-3D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 3xD

ISCAR D3N 0945-283-125R-3D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 3xD

ISO: D3N 0945-283-125R-3D

$580.80
Picture of ISCAR D3N 0906-272-125R-3D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 3xD

ISCAR D3N 0906-272-125R-3D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and Round Shank, Drill ing Depth 3xD

ISO: D3N 0906-272-125R-3D

$580.80
Picture of INGERSOLL YD2000160C8R01 0.7874 (20.0 mm) QwikTwist Body

INGERSOLL YD2000160C8R01 0.7874 (20.0 mm) QwikTwist Body

ISO: YD2000160C8R01

$580.52
Picture of INGERSOLL YD1900152C8R01 0.7480 (19.0 mm) QwikTwist Body

INGERSOLL YD1900152C8R01 0.7480 (19.0 mm) QwikTwist Body

ISO: YD1900152C8R01

$580.52
Picture of WIDIA/KENNAMETAL TDMX0630R12SF075 TDMX BODY D.630 12XD SF Shank

WIDIA/KENNAMETAL TDMX0630R12SF075 TDMX BODY D.630 12XD SF Shank

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX160R1SL20M TDMX BODY D=16MM 1XD SL Shank

WIDIA/KENNAMETAL TDMX160R1SL20M TDMX BODY D=16MM 1XD SL Shank

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0206041N5R01 0.813 (20.65 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0206041N5R01 0.813 (20.65 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0206041N5R01

$576.95
Picture of INGERSOLL Q0222044N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0222044N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0222044N5R02

$576.95
Picture of INGERSOLL Q0214042N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

INGERSOLL Q0214042N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s|L:D Ratio - 2:1|

ISO: Q0214042N5R02

$576.95
Picture of ZCC ZTD04-1.719"-XP1.50"-SP14-02 1.719" DIA Square Insert Drill

ZCC ZTD04-1.719"-XP1.50"-SP14-02 1.719" DIA Square Insert Drill

$575.42
Picture of ISCAR D3N 0787-394-100A-5D 0.787" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR D3N 0787-394-100A-5D 0.787" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: D3N 0787-394-100A-5D

$575.04
Picture of ISCAR D3N 0748-374-100A-5D 0.748" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISCAR D3N 0748-374-100A-5D 0.748" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 5xD

ISO: D3N 0748-374-100A-5D

$575.04
Picture of ISCAR BLANK MB80-100X250 Mill Boring Boring Head Blank

ISCAR BLANK MB80-100X250 Mill Boring Boring Head Blank

ANSI: BLANK MB80-100X250

ISO: BLANK MB80-100X250

$574.71
Picture of ISCAR DR1000-2000-125-09-2D-N 1" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR1000-2000-125-09-2D-N 1" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR1000-2000-125-09-2D-N

$574.08
Picture of ISCAR DR0984-1969-125-09-2D-N 0.984" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0984-1969-125-09-2D-N 0.984" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0984-1969-125-09-2D-N

$574.08
Picture of ISCAR DR0937-1875-100-07-2D-N 0.937" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0937-1875-100-07-2D-N 0.937" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0937-1875-100-07-2D-N

$574.08
Picture of INGERSOLL YD2200110C8R01 0.8661 (22.0 mm) QwikTwist Body

INGERSOLL YD2200110C8R01 0.8661 (22.0 mm) QwikTwist Body

ISO: YD2200110C8R01

$572.91
Picture of INGERSOLL LD2000160N5R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

INGERSOLL LD2000160N5R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

ISO: LD2000160N5R01

$572.39
Picture of INGERSOLL LD2200110N5R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200110N5R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200110N5R01

$572.39
Picture of INGERSOLL LD2100105N5R01 0.8267 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

INGERSOLL LD2100105N5R01 0.8267 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

ISO: LD2100105N5R01

$572.39
Picture of INGERSOLL LD2100105JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

INGERSOLL LD2100105JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) SpadeTwist Body

ISO: LD2100105JFR00

$572.39
Picture of INGERSOLL LD2000160JFR00 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

INGERSOLL LD2000160JFR00 0.7874 (20.0 mm)-0.8228 (20.9 mm) SpadeTwist Body

ISO: LD2000160JFR00

$572.39
Picture of INGERSOLL LD2200110JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

INGERSOLL LD2200110JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) SpadeTwist Body

ISO: LD2200110JFR00

$572.39
Picture of INGERSOLL 4508246 Mill Boring Quick Change PSC "Capt0 Type"8

INGERSOLL 4508246 Mill Boring Quick Change PSC "Capt0 Type"8

ISO: PSC80-MHD63.150

$572.00
Picture of INGERSOLL Hole Making Mill Boring Boring Head Mill Bore Cartridge PC12.50 Steel

INGERSOLL Hole Making Mill Boring Boring Head Mill Bore Cartridge PC12.50 Steel

ISO: PC12.50

$572.00
Picture of ISCAR BHR MB50-50X100 Mill Boring Boring Head Twin Bore

ISCAR BHR MB50-50X100 Mill Boring Boring Head Twin Bore

ANSI: BHR MB50-50X100

ISO: BHR MB50-50X100

$571.56
Picture of INGERSOLL TD1900152C8R01 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

INGERSOLL TD1900152C8R01 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

ISO: TD1900152C8R01

$571.48
Picture of INGERSOLL TD2200110JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200110JFR00 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200110JFR00

$571.48
Picture of INGERSOLL TD2100105JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100105JFR00 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100105JFR00

$571.48
Picture of INGERSOLL TD2000160JFR00 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

INGERSOLL TD2000160JFR00 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

ISO: TD2000160JFR00

$571.48
Picture of INGERSOLL TD2200110C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

INGERSOLL TD2200110C8R01 0.8661 (22.0 mm)-0.9016 (22.9 mm) GoldTwist Body

ISO: TD2200110C8R01

$571.48
Picture of INGERSOLL TD2100105C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

INGERSOLL TD2100105C8R01 0.8268 (21.0 mm)-0.8622 (21.9 mm) GoldTwist Body

ISO: TD2100105C8R01

$571.48
Picture of INGERSOLL TD2000160C8R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

INGERSOLL TD2000160C8R01 0.7874 (20.0 mm)-0.8228 (20.9 mm) GoldTwist Body

ISO: TD2000160C8R01

$571.48
Picture of INGERSOLL TD1900152JFR00 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

INGERSOLL TD1900152JFR00 0.7480 (19.0 mm)-0.7835 (19.9 mm) GoldTwist Body

ISO: TD1900152JFR00

$571.48
Picture of INGERSOLL Hole Making Mill Boring Boring Head Machine Taper HSK80

INGERSOLL Hole Making Mill Boring Boring Head Machine Taper HSK80

ISO: HSK-A80MHD50.70

$571.28
Picture of PARLEC B50-PC5-8 Boring Head Machine Taper

PARLEC B50-PC5-8 Boring Head Machine Taper

ANSI: B50-PC5-8

ISO: B50-PC5-8

Call (262) 251-4020 for pricing
Picture of PARLEC B50-PC5-10 Boring Head Machine Taper

PARLEC B50-PC5-10 Boring Head Machine Taper

ANSI: B50-PC5-10

ISO: B50-PC5-10

Call (262) 251-4020 for pricing
Picture of INGERSOLL TD2400120S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

INGERSOLL TD2400120S9R01 0.9449 (24.000 mm)-0.9803 (24.900 mm) GoldTwist Body

ISO: TD2400120S9R01

$570.57
Picture of INGERSOLL TD2300115S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

INGERSOLL TD2300115S9R01 0.9055 (23.000 mm)-0.9409 (23.900 mm) GoldTwist Body

ISO: TD2300115S9R01

$570.57
Picture of ZCC ZTD03-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

ZCC ZTD03-1.750"-XP1.50"-SP14-02 1.750" DIA Square Insert Drill

$570.06
Picture of TUNGALOY TDXU-0875FS-02 7/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0875FS-02 7/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0875FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0812FS-02 0.812" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

TUNGALOY TDXU-0812FS-02 0.812" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 2, Flat cotter

ISO: TDXU-0812FS-02

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX225F25-2 22.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX225F25-2 22.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX225F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX220F25-2 22mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX220F25-2 22mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX220F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX215F25-2 21.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX215F25-2 21.5mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX215F25-2

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX210F25-2 21mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

TUNGALOY TDX210F25-2 21mm TungDrill Twisted Indexable Insert Drill s, L/D=2, Flat cotter

ISO: TDX210F25-2

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM240R3SCF25M TDM1 SCF Drill BODY 3XD D=24.0

WIDIA/KENNAMETAL TDM240R3SCF25M TDM1 SCF Drill BODY 3XD D=24.0

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1181-177-125R-1.5D 1.181" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISCAR DCN 1181-177-125R-1.5D 1.181" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISO: DCN 1181-177-125R-1.5D

$568.32
Picture of ISCAR DCN 1142-171-125R-1.5D 1.142" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISCAR DCN 1142-171-125R-1.5D 1.142" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 1.5xD

ISO: DCN 1142-171-125R-1.5D

$568.32
Picture of INGERSOLL Q0135054N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0135054N5R01 0.531 (13.49 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0135054N5R01

$567.84
Picture of INGERSOLL Q0127051N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

INGERSOLL Q0127051N5R01 0.500 (12.70 mm) Square Insert Indexable Drill s|L:D Ratio - 4:1|

ISO: Q0127051N5R01

$567.84
Picture of ISCAR D3N 0945-142-125A-1.5D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR D3N 0945-142-125A-1.5D 0.945" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: D3N 0945-142-125A-1.5D

$566.40
Picture of ISCAR D3N 0906-138-125A-1.5D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR D3N 0906-138-125A-1.5D 0.906" Exchangeable Head 3 Flute Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: D3N 0906-138-125A-1.5D

$566.40
Picture of ISCAR DCN 1024-307-125R-3D 1.024" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 1024-307-125R-3D 1.024" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 1024-307-125R-3D

$566.40
Picture of ISCAR DCN 0984-295-125R-3D 0.984" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISCAR DCN 0984-295-125R-3D 0.984" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 3xD

ISO: DCN 0984-295-125R-3D

$566.40
Picture of TUNGALOY EVX16063RS Milling Cutter 90.0°, Drill Mill 2.480 Cutter Diameter Cylindrical Shank1.6535 9.448 OAL 3 Flute

TUNGALOY EVX16063RS Milling Cutter 90.0°, Drill Mill 2.480 Cutter Diameter Cylindrical Shank1.6535 9.448 OAL 3 Flute

ANSI: EVX16063RS

ISO: EVX16063RS

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0984R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

WIDIA/KENNAMETAL TDM0984R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0945R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

WIDIA/KENNAMETAL TDM0945R3SCF100 TDM1 Drill BODY INCH SCF 3XD D

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM250R3SCF25M TDM1 SCF Drill BODY 3XD D=25.0

WIDIA/KENNAMETAL TDM250R3SCF25M TDM1 SCF Drill BODY 3XD D=25.0

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM080R8SCF12M TDM1 SCF Drill BODY 8XD D=8.00

WIDIA/KENNAMETAL TDM080R8SCF12M TDM1 SCF Drill BODY 8XD D=8.00

Call (262) 251-4020 for pricing
Picture of INGERSOLL YD2500075C8R01 0.9843 (25.0 mm) QwikTwist Body

INGERSOLL YD2500075C8R01 0.9843 (25.0 mm) QwikTwist Body

ISO: YD2500075C8R01

$564.47
Picture of YG-1 P13708 SERIES 7 Straight Shank & Straight Flute Short Length Spade Drill Holder

YG-1 P13708 SERIES 7 Straight Shank & Straight Flute Short Length Spade Drill Holder

$561.17
Picture of DIJET SEC-2150-1.5-S125 Milling Cutter 90.0°, Drill Mill 1.500 Cutter Diameter Weldon 1.250 Shank 5.500 OAL 4 Flute

DIJET SEC-2150-1.5-S125 Milling Cutter 90.0°, Drill Mill 1.500 Cutter Diameter Weldon 1.250 Shank 5.500 OAL 4 Flute

ANSI: SEC-2150-1.5-S125

ISO: SEC-2150-1.5-S125

Call (262) 251-4020 for pricing
Picture of INGERSOLL Hole Making Mill Boring Boring Head Shank Cylindrical 0.625 Carbide

INGERSOLL Hole Making Mill Boring Boring Head Shank Cylindrical 0.625 Carbide

ISO: BMD5/8-16.110

$559.84
Picture of ISCAR DCN 0945-283-125A-3D 0.945" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 0945-283-125A-3D 0.945" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 0945-283-125A-3D

$559.68
Picture of ISCAR DCN 0906-272-125A-3D 0.906" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISCAR DCN 0906-272-125A-3D 0.906" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 3xD

ISO: DCN 0906-272-125A-3D

$559.68
Picture of ISCAR DR0906-1813-100-07-2D-N 0.906" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0906-1813-100-07-2D-N 0.906" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0906-1813-100-07-2D-N

$558.72
Picture of ISCAR DR0875-1750-100-07-2D-N 7/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0875-1750-100-07-2D-N 7/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0875-1750-100-07-2D-N

$558.72
Picture of ISCAR DR0844-1688-100-07-2D-N 0.844" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0844-1688-100-07-2D-N 0.844" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0844-1688-100-07-2D-N

$558.72
Picture of ISCAR DR0812-1625-100-06-2D-N 0.812" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISCAR DR0812-1625-100-06-2D-N 0.812" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 2xD

ISO: DR0812-1625-100-06-2D-N

$558.72
Picture of WIDIA/KENNAMETAL TDMX0827R8SL100 TDMX Drill BODY D.827 8XD SL S

WIDIA/KENNAMETAL TDMX0827R8SL100 TDMX Drill BODY D.827 8XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0788R8SL100 TDMX Drill BODY D.788 8XD SL S

WIDIA/KENNAMETAL TDMX0788R8SL100 TDMX Drill BODY D.788 8XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX210R8SL25M TDMX Drill BODY D=21MM 8XD SL

WIDIA/KENNAMETAL TDMX210R8SL25M TDMX Drill BODY D=21MM 8XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX200R8SL25M TDMX Drill BODY D=20MM 8XD SL

WIDIA/KENNAMETAL TDMX200R8SL25M TDMX Drill BODY D=20MM 8XD SL

Call (262) 251-4020 for pricing
Picture of INGERSOLL Q0198059N5R01 0.781 (19.84 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0198059N5R01 0.781 (19.84 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0198059N5R01

$557.83
Picture of INGERSOLL Q0191057N5R01 0.750 (19.05 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0191057N5R01 0.750 (19.05 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0191057N5R01

$557.83
Picture of INGERSOLL Q0183055N5R01 0.719 (18.26 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0183055N5R01 0.719 (18.26 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0183055N5R01

$557.83
Picture of INGERSOLL Q0175053N5R01 0.688 (17.48 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0175053N5R01 0.688 (17.48 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0175053N5R01

$557.83
Picture of INGERSOLL Q0167050N5R01 0.657 (16.69 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0167050N5R01 0.657 (16.69 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0167050N5R01

$557.83
Picture of INGERSOLL Q0159048N5R01 0.626 (15.90 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

INGERSOLL Q0159048N5R01 0.626 (15.90 mm) Square Insert Indexable Drill s|L:D Ratio - 3:1|

ISO: Q0159048N5R01

$557.83
Picture of PARLEC C50-PC7-10 Boring Head Machine Taper

PARLEC C50-PC7-10 Boring Head Machine Taper

ANSI: C50-PC7-10

ISO: C50-PC7-10

Call (262) 251-4020 for pricing
Picture of INGERSOLL QR0135054N5R02 0.531 (13.49 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135054N5R02 0.531 (13.49 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135054N5R02

$556.01
Picture of INGERSOLL QR0127051N5R02 0.500 (12.70 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0127051N5R02 0.500 (12.70 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0127051N5R02

$556.01
Picture of INGERSOLL QR0135054JER00 0.531 (13.49 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0135054JER00 0.531 (13.49 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0135054JER00

$556.01
Picture of INGERSOLL QR0130052JER00 0.512 (13.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0130052JER00 0.512 (13.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0130052JER00

$556.01
Picture of INGERSOLL QR0150060N5R01 0.591 (15.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150060N5R01 0.591 (15.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150060N5R01

$556.01
Picture of INGERSOLL QR0125050JER00 0.492 (12.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0125050JER00 0.492 (12.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0125050JER00

$556.01
Picture of INGERSOLL QR0120048JER00 0.472 (11.99 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0120048JER00 0.472 (11.99 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0120048JER00

$556.01
Picture of INGERSOLL QR0250075N6R02 0.984 (24.99 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0250075N6R02 0.984 (24.99 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0250075N6R02

$556.01
Picture of INGERSOLL QR0254076N6R02 1.000 (25.40 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0254076N6R02 1.000 (25.40 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0254076N6R02

$556.01
Picture of INGERSOLL QR0246074N6R02 0.969 (24.61 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0246074N6R02 0.969 (24.61 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0246074N6R02

$556.01
Picture of INGERSOLL QR0238071N6R02 0.937 (23.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0238071N6R02 0.937 (23.80 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0238071N6R02

$556.01
Picture of INGERSOLL QR0230069N6R02 0.906 (23.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0230069N6R02 0.906 (23.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0230069N6R02

$556.01
Picture of INGERSOLL QR0222067N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0222067N5R02 0.875 (22.23 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0222067N5R02

$556.01
Picture of INGERSOLL QR0214064N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0214064N5R02 0.843 (21.41 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0214064N5R02

$556.01
Picture of INGERSOLL QR0206062N5R02 0.813 (20.65 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0206062N5R02 0.813 (20.65 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 3:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0206062N5R02

$556.01
Picture of INGERSOLL QR0150060N5R02 0.591 (15.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150060N5R02 0.591 (15.01 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150060N5R02

$556.01
Picture of INGERSOLL QR0143057N5R02 0.563 (14.30 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0143057N5R02 0.563 (14.30 mm) Square Insert Indexable Drill s Inch|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0143057N5R02

$556.01
Picture of INGERSOLL QR0145060JER00 0.571 (14.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0145060JER00 0.571 (14.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0145060JER00

$556.01
Picture of INGERSOLL QR0245075JFR00 0.965 (24.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0245075JFR00 0.965 (24.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0245075JFR00

$556.01
Picture of INGERSOLL QR0235072JFR00 0.925 (23.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0235072JFR00 0.925 (23.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0235072JFR00

$556.01
Picture of INGERSOLL QR0225069JFR00 0.886 (22.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0225069JFR00 0.886 (22.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0225069JFR00

$556.01
Picture of INGERSOLL QR0215066JFR00 0.847 (21.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0215066JFR00 0.847 (21.50 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0215066JFR00

$556.01
Picture of INGERSOLL QR0250075JFR00 0.984 (25.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0250075JFR00 0.984 (25.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0250075JFR00

$556.01
Picture of INGERSOLL QR0240072JFR00 0.945 (24.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0240072JFR00 0.945 (24.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0240072JFR00

$556.01
Picture of INGERSOLL QR0230069JFR00 0.906 (23.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0230069JFR00 0.906 (23.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0230069JFR00

$556.01
Picture of INGERSOLL QR0220066JFR00 0.866 (22.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0220066JFR00 0.866 (22.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0220066JFR00

$556.01
Picture of INGERSOLL QR0210063JFR00 0.827 (21.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0210063JFR00 0.827 (21.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 3:1|For Lathe Application: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0210063JFR00

$556.01
Picture of INGERSOLL QR0150060JER00 0.591 (15.01 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0150060JER00 0.591 (15.01 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0150060JER00

$556.01
Picture of INGERSOLL QR0140056JER00 0.551 (14.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

INGERSOLL QR0140056JER00 0.551 (14.00 mm) Square Insert Indexable Drill s Metric|L:D Ratio - 4:1|For Lathe Use: Brass Coolant Fitting Should Be Ordered Separately|

ISO: QR0140056JER00

$556.01
Picture of K-Tool FB-2250 Multi Insert Drill 2.250 Cutter Diameter 2.000 Weldon

K-Tool FB-2250 Multi Insert Drill 2.250 Cutter Diameter 2.000 Weldon

ANSI: FB-2250

ISO: FB-2250

Call (262) 251-4020 for pricing
Picture of K-Tool FB-2125 Multi Insert Drill 2.125 Cutter Diameter 2.000 Weldon

K-Tool FB-2125 Multi Insert Drill 2.125 Cutter Diameter 2.000 Weldon

ANSI: FB-2125

ISO: FB-2125

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0630R0750-12 0.63" Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TIDU0630R0750-12 0.63" Drill Meister Indexable head Drill with cylindrical Shank

ISO: TIDU0630R0750-12

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID160R20-12 16mm Drill Meister Indexable head Drill with cylindrical Shank

TUNGALOY TID160R20-12 16mm Drill Meister Indexable head Drill with cylindrical Shank

ISO: TID160R20-12

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX310R1SL32M TDMX BODY D=31MM 1XD SL Shank

WIDIA/KENNAMETAL TDMX310R1SL32M TDMX BODY D=31MM 1XD SL Shank

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX300R1SL32M TDMX BODY D=30MM 1XD SL Shank

WIDIA/KENNAMETAL TDMX300R1SL32M TDMX BODY D=30MM 1XD SL Shank

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1221R1SL125 TDMX BODY D1.221 1XD SL Shank

WIDIA/KENNAMETAL TDMX1221R1SL125 TDMX BODY D1.221 1XD SL Shank

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX1182R1SL125 TDMX BODY D1.182 1XD SL Shank

WIDIA/KENNAMETAL TDMX1182R1SL125 TDMX BODY D1.182 1XD SL Shank

Call (262) 251-4020 for pricing
Picture of ISCAR DCNS 0945-472-094B-5D 0.945" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0945-472-094B-5D 0.945" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISO: DCNS 0945-472-094B-5D

$552.00
Picture of ISCAR DCNS 0906-453-090B-5D 0.906" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISCAR DCNS 0906-453-090B-5D 0.906" Indexable Head Drill s without a Flange and One Flat Shank, Drill ing Depth 5xD, Suitable for Chamfer ing Holders

ISO: DCNS 0906-453-090B-5D

$552.00
Picture of INGERSOLL Hole Making Mill Boring Boring Head Machine Taper Flange Mount 3.543

INGERSOLL Hole Making Mill Boring Boring Head Machine Taper Flange Mount 3.543

ISO: DIN2079-40.50

$551.99
Picture of WIDIA/KENNAMETAL TDMX0906R5SL100 TDMX Drill BODY D.906 5XD SL S

WIDIA/KENNAMETAL TDMX0906R5SL100 TDMX Drill BODY D.906 5XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0867R5SL100 TDMX Drill BODY D.867 5XD SL S

WIDIA/KENNAMETAL TDMX0867R5SL100 TDMX Drill BODY D.867 5XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX230R5SL25M TDMX Drill BODY D=23MM 5XD SL

WIDIA/KENNAMETAL TDMX230R5SL25M TDMX Drill BODY D=23MM 5XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX220R5SL25M TDMX Drill BODY D=22MM 5XD SL

WIDIA/KENNAMETAL TDMX220R5SL25M TDMX Drill BODY D=22MM 5XD SL

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS209F25-3 20.9mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS209F25-3 20.9mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS209F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS205F25-3 20.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS205F25-3 20.5mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS205F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDS200F25-3 20mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDS200F25-3 20mm TungSix-Drill Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDS200F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY EVX16125RLHU Milling Cutter 90.0°, Drill Mill 1.250 Cutter Diameter Weldon 1.2500 10.00 OAL 2 Flute

TUNGALOY EVX16125RLHU Milling Cutter 90.0°, Drill Mill 1.250 Cutter Diameter Weldon 1.2500 10.00 OAL 2 Flute

ANSI: EVX16125RLHU

ISO: EVX16125RLHU

Call (262) 251-4020 for pricing
Picture of TUNGALOY EVX16032RLA Milling Cutter 90.0°, Drill Mill 1.260 Cutter Diameter Cylindrical Shank1.2598 10.03 OAL 2 Flute

TUNGALOY EVX16032RLA Milling Cutter 90.0°, Drill Mill 1.260 Cutter Diameter Cylindrical Shank1.2598 10.03 OAL 2 Flute

ANSI: EVX16032RLA

ISO: EVX16032RLA

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 1024-154-125A-1.5D 1.024" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 1024-154-125A-1.5D 1.024" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 1024-154-125A-1.5D

$550.08
Picture of ISCAR DCN 0984-150-125A-1.5D 0.984" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISCAR DCN 0984-150-125A-1.5D 0.984" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 1.5xD

ISO: DCN 0984-150-125A-1.5D

$550.08
Picture of TUNGALOY TIDU0866F1000-3 0.866" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0866F1000-3 0.866" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0866F1000-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0827F1000-3 0.827" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0827F1000-3 0.827" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0827F1000-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID220F25-3 22mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID220F25-3 22mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID220F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID210F25-3 21mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID210F25-3 21mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID210F25-3

Call (262) 251-4020 for pricing
Picture of INGERSOLL TD1900152T5R00 0.7480 (19.000 mm)-0.7835 (19.900 mm) GoldTwist Body

INGERSOLL TD1900152T5R00 0.7480 (19.000 mm)-0.7835 (19.900 mm) GoldTwist Body

ISO: TD1900152T5R00

$548.73
Picture of INGERSOLL TD2000160T5R00 0.7874 (20.000 mm)-0.8228 (20.900 mm) GoldTwist Body

INGERSOLL TD2000160T5R00 0.7874 (20.000 mm)-0.8228 (20.900 mm) GoldTwist Body

ISO: TD2000160T5R00

$548.73
Picture of ISCAR DCM 0984-492-100A-5D .984" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISCAR DCM 0984-492-100A-5D .984" Indexable Head Drill s with One Flat Shank, Drill ing Depth 5xD

ISO: DCM 0984-492-100A-5D

$548.16
Picture of PARLEC B50-PC6-6 Boring Head Machine Taper

PARLEC B50-PC6-6 Boring Head Machine Taper

ANSI: B50-PC6-6

ISO: B50-PC6-6

Call (262) 251-4020 for pricing
Picture of ISCAR DCN 0709-567-100A-8D 0.709" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISCAR DCN 0709-567-100A-8D 0.709" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISO: DCN 0709-567-100A-8D

$546.24
Picture of ISCAR DCN 0669-535-075A-8D 0.669" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISCAR DCN 0669-535-075A-8D 0.669" Indexable Head Drill s with Coolant Holes and One Flat Shank, Drill ing Depth 8xD

ISO: DCN 0669-535-075A-8D

$546.24
Picture of ISCAR DCN 0866-433-100R-5D 0.866" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISCAR DCN 0866-433-100R-5D 0.866" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISO: DCN 0866-433-100R-5D

$545.28
Picture of ISCAR DCN 0827-413-100R-5D 0.827" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISCAR DCN 0827-413-100R-5D 0.827" Indexable Head Drill s with Coolant Holes and Cylindrical Shanks, Drill ing Depth 5xD

ISO: DCN 0827-413-100R-5D

$545.28
Picture of INGERSOLL Hole Making Mill Boring Boring Head Extension MB50 1.968 Heavy Metal

INGERSOLL Hole Making Mill Boring Boring Head Extension MB50 1.968 Heavy Metal

ISO: RAV50/20.93

$544.12
Picture of YG-1 P17404 SERIES 4 Straight Shank & Straight Flute Long Length Spade Drill Holder

YG-1 P17404 SERIES 4 Straight Shank & Straight Flute Long Length Spade Drill Holder

$544.06
Picture of TUNGALOY ECC31005RU-60 Milling Cutter 60.0° 2.170 Cutter Diameter Cylindrical Shank1.0000 4.252 OAL 2 Flute

TUNGALOY ECC31005RU-60 Milling Cutter 60.0° 2.170 Cutter Diameter Cylindrical Shank1.0000 4.252 OAL 2 Flute

ANSI: ECC31005RU-60

ISO: ECC31005RU-60

Call (262) 251-4020 for pricing
Picture of TUNGALOY ECC31005R-60 Milling Cutter 60.0° 2.165 Cutter Diameter Cylindrical Shank1.2598 5.122 OAL 2 Flute

TUNGALOY ECC31005R-60 Milling Cutter 60.0° 2.165 Cutter Diameter Cylindrical Shank1.2598 5.122 OAL 2 Flute

ANSI: ECC31005R-60

ISO: ECC31005R-60

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0787F1000-5 0.787" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0787F1000-5 0.787" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0787F1000-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID200F25-5 20mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID200F25-5 20mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID200F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0748F1000-5 0.748" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0748F1000-5 0.748" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0748F1000-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TIDU0709F1000-5 0.709" Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TIDU0709F1000-5 0.709" Drill Meister Indexable head Drill with flanged Shank

ISO: TIDU0709F1000-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TID190F25-5 19mm Drill Meister Indexable head Drill with flanged Shank

TUNGALOY TID190F25-5 19mm Drill Meister Indexable head Drill with flanged Shank

ISO: TID190F25-5

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0750FS-03 3/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-0750FS-03 3/4" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-0750FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0687FS-03 0.687" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-0687FS-03 0.687" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-0687FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDXU-0625FS-03 5/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

TUNGALOY TDXU-0625FS-03 5/8" TungDrill Twisted Indexable Insert Drill s with side & rear Coolant port, L/D = 3, Flat cotter

ISO: TDXU-0625FS-03

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX205F25-3 20.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX205F25-3 20.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX205F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX200F25-3 20mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX200F25-3 20mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX200F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX195F25-3 19.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX195F25-3 19.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX195F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX190F25-3 19mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX190F25-3 19mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX190F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX185F25-3 18.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX185F25-3 18.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX185F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX180F25-3 18mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX180F25-3 18mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX180F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX175F25-3 17.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX175F25-3 17.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX175F25-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX170F20-3 17mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX170F20-3 17mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX170F20-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX165F20-3 16.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX165F20-3 16.5mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX165F20-3

Call (262) 251-4020 for pricing
Picture of TUNGALOY TDX160F20-3 16mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

TUNGALOY TDX160F20-3 16mm TungDrill Twisted Indexable Insert Drill s, L/D=3, Flat cotter

ISO: TDX160F20-3

Call (262) 251-4020 for pricing
Picture of K-Tool FB-2000-3 Multi Insert Drill 2.000 Cutter Diameter 1.500 Weldon

K-Tool FB-2000-3 Multi Insert Drill 2.000 Cutter Diameter 1.500 Weldon

ANSI: FB-2000-3

ISO: FB-2000-3

Call (262) 251-4020 for pricing
Picture of INGERSOLL TD2500075S9R01 0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body

INGERSOLL TD2500075S9R01 0.9843 (25.000 mm)-1.0197 (25.900 mm) GoldTwist Body

ISO: TD2500075S9R01

$539.63
Picture of ISCAR DR0709-2127-100-06-3D-N 0.709" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR0709-2127-100-06-3D-N 0.709" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR0709-2127-100-06-3D-N

$539.52
Picture of ISCAR DCN 0787-630-100R-8D 0.787" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0787-630-100R-8D 0.787" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0787-630-100R-8D

$539.52
Picture of ISCAR DCN 0748-598-100R-8D 0.748" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISCAR DCN 0748-598-100R-8D 0.748" Indexable Head Drill s with Coolant Holes and a Cylindrical Shank, Drill ing Depth 8xD

ISO: DCN 0748-598-100R-8D

$539.52
Picture of ISCAR DR0781-2344-100-06-3D-N 0.781" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR0781-2344-100-06-3D-N 0.781" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR0781-2344-100-06-3D-N

$539.52
Picture of ISCAR DR0750-2250-100-06-3D-N 3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR0750-2250-100-06-3D-N 3/4" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR0750-2250-100-06-3D-N

$539.52
Picture of ISCAR DR0734-2203-100-06-3D-N 0.734" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR0734-2203-100-06-3D-N 0.734" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR0734-2203-100-06-3D-N

$539.52
Picture of ISCAR DR0703-2109-075-05-3D-N 0.703" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR0703-2109-075-05-3D-N 0.703" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR0703-2109-075-05-3D-N

$539.52
Picture of ISCAR DR0688-2062-075-05-3D-N 0.688" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR0688-2062-075-05-3D-N 0.688" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR0688-2062-075-05-3D-N

$539.52
Picture of ISCAR DR0656-1969-075-05-3D-N 0.656" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR0656-1969-075-05-3D-N 0.656" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR0656-1969-075-05-3D-N

$539.52
Picture of ISCAR DR0625-1875-075-05-3D-N 5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISCAR DR0625-1875-075-05-3D-N 5/8" Indexable Square Insert Drill s with Coolant Holes, Drill ing Depth 3xD

ISO: DR0625-1875-075-05-3D-N

$539.52
Picture of WIDIA/KENNAMETAL TDMX0985R3SL125 TDMX Drill BODY D.985 3XD SL S

WIDIA/KENNAMETAL TDMX0985R3SL125 TDMX Drill BODY D.985 3XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX0945R3SL125 TDMX Drill BODY D.945 3XD SL S

WIDIA/KENNAMETAL TDMX0945R3SL125 TDMX Drill BODY D.945 3XD SL S

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX250R3SL32M TDMX Drill BODY D=25MM 3XD SL

WIDIA/KENNAMETAL TDMX250R3SL32M TDMX Drill BODY D=25MM 3XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDMX240R3SL32M TDMX Drill BODY D=24MM 3XD SL

WIDIA/KENNAMETAL TDMX240R3SL32M TDMX Drill BODY D=24MM 3XD SL

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0827R8SS088 TDM1 Drill BODY INCH SS 8XD D=

WIDIA/KENNAMETAL TDM0827R8SS088 TDM1 Drill BODY INCH SS 8XD D=

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL TDM0787R8SS081 TDM1 Drill BODY INCH SS 8XD D=

WIDIA/KENNAMETAL TDM0787R8SS081 TDM1 Drill BODY INCH SS 8XD D=

Call (262) 251-4020 for pricing