Groove Turning

Why Groove Turning Over Plunging or General Turning?

When precision grooves are needed on round parts, groove turning offers serious advantages over both general turning and simple plunging operations.

  • Superior Side Wall Finish – Unlike plunging, groove turning can clean up side walls with lateral tool movement for tighter tolerances.

  • Accurate Width Control – Enables precise groove widths without tool deflection or chattering common in straight plunge cuts.

  • Reduced Tool Load – By spreading the cut with turning passes, you avoid the high stress and potential insert breakage that come with deep plunges.

  • Repeatable Quality – Groove turning is ideal for production runs where consistent depth, width, and finish matter.

  • Flexibility – Handles complex groove profiles and undercuts that basic grooving tools can’t manage.

For tight-tolerance grooves, especially on OD/ID work, groove turning is the method of choice.

Sort by
Picture of ISCAR GIF 6.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide AlTiN + TiN

ISCAR GIF 6.00E-0.40 IC830 Grooving,Groove Turning Insert 0.016 Corner Radius 0.236 Wide AlTiN + TiN

ANSI: GIF 6.00E-0.40 IC830

ISO: GIF 6.00E-0.40 IC830

$41.76
Picture of ISCAR SCIR 41-150NP08 IC1008 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ISCAR SCIR 41-150NP08 IC1008 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ANSI: SCIR 41-150NP08 IC1008

ISO: SCIR 41-150NP08 IC1008

$41.68
Picture of ISCAR SCIL 41-300NP08 IC1008 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.118 Wide TiAIN + TiN

ISCAR SCIL 41-300NP08 IC1008 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.118 Wide TiAIN + TiN

ANSI: SCIL 41-300NP08 IC1008

ISO: SCIL 41-300NP08 IC1008

$41.68
Picture of ISCAR SCIR 41-200NP08 IC1008 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR SCIR 41-200NP08 IC1008 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: SCIR 41-200NP08 IC1008

ISO: SCIR 41-200NP08 IC1008

$41.68
Picture of ISCAR SCIR 41-250NP08 IC1008 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ISCAR SCIR 41-250NP08 IC1008 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ANSI: SCIR 41-250NP08 IC1008

ISO: SCIR 41-250NP08 IC1008

$41.68
Picture of ISCAR SCIL 41-150NP08 IC1008 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ISCAR SCIL 41-150NP08 IC1008 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.059 Wide TiAIN + TiN

ANSI: SCIL 41-150NP08 IC1008

ISO: SCIL 41-150NP08 IC1008

$41.68
Picture of ISCAR SCIL 41-250NP08 IC1008 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ISCAR SCIL 41-250NP08 IC1008 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.098 Wide TiAIN + TiN

ANSI: SCIL 41-250NP08 IC1008

ISO: SCIL 41-250NP08 IC1008

$41.68
Picture of ISCAR SCIL 41-200NP08 IC1008 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR SCIL 41-200NP08 IC1008 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: SCIL 41-200NP08 IC1008

ISO: SCIL 41-200NP08 IC1008

$41.68
Picture of ISCAR SCIR 41-300NP08 IC1008 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.118 Wide TiAIN + TiN

ISCAR SCIR 41-300NP08 IC1008 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.118 Wide TiAIN + TiN

ANSI: SCIR 41-300NP08 IC1008

ISO: SCIR 41-300NP08 IC1008

$41.68
Picture of SECO LCMF130404-0400-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF130404-0400-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF130404-0400-FT TGP25

ISO: LCMF130404-0400-FT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160402-0400-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160402-0400-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160402-0400-FT TGP25

ISO: LCMF160402-0400-FT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160408-0400-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160408-0400-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160408-0400-MT TGP25

ISO: LCMF160408-0400-MT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160404-0400-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160404-0400-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160404-0400-MC TGP25

ISO: LCMF160404-0400-MC TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160408-0400-MT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160408-0400-MT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160408-0400-MT TGK1500

ISO: LCMF160408-0400-MT TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCMF130404-0400-FT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF130404-0400-FT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF130404-0400-FT TGK1500

ISO: LCMF130404-0400-FT TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCMF160408-0400-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160408-0400-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160408-0400-FT TGP25

ISO: LCMF160408-0400-FT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF130404-0400-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF130404-0400-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF130404-0400-MC TGP25

ISO: LCMF130404-0400-MC TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCEX080402-0250L-L30 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX080402-0250L-L30 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX080402-0250L-L30

ISO: LCEX080402-0250L-L30 CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX080402-0250R-R30 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX080402-0250R-R30 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX080402-0250R-R30

ISO: LCEX080402-0250R-R30 CP500

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX5-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.197 Wide

TUNGALOY DTX5-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.197 Wide

ANSI: DTX5-040 AH725

ISO: DTX5-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX5-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.197 Wide

TUNGALOY DTX5-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.197 Wide

ANSI: DTX5-040 GH130

ISO: DTX5-040 GH130

Call (262) 251-4020 for pricing
Picture of SECO LCMR160604-0600-MC CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMR160604-0600-MC CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMR160604-0600-MC CP600

ISO: LCMR160604-0600-MC CP600

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR8-400 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.157 Corner Radius 0.315 Wide

TUNGALOY DTR8-400 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.157 Corner Radius 0.315 Wide

ANSI: DTR8-400 AH725

ISO: DTR8-400 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR8-400 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.157 Corner Radius 0.315 Wide

TUNGALOY DTR8-400 AH7025 Clamp Down Grooving,Groove Turning Insert AlTiN 0.157 Corner Radius 0.315 Wide

ANSI: DTR8-400 AH7025

ISO: DTR8-400 AH7025

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR8-400 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.157 Corner Radius 0.315 Wide

TUNGALOY DTR8-400 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.157 Corner Radius 0.315 Wide

ANSI: DTR8-400 GH130

ISO: DTR8-400 GH130

Call (262) 251-4020 for pricing
Picture of ISCAR GDMU 808 IC8250 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMU 808 IC8250 Cut Off,Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMU 808 IC8250

ISO: GDMU 808 IC8250

$41.14
Picture of ISCAR GDMF 808 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMF 808 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMF 808 IC5010

ISO: GDMF 808 IC5010

$41.14
Picture of ISCAR GDMY 808 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMY 808 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMY 808 IC5010

ISO: GDMY 808 IC5010

$41.14
Picture of ISCAR GDMY 808 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMY 808 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMY 808 IC8250

ISO: GDMY 808 IC8250

$41.14
Picture of ISCAR GDMN 808 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ISCAR GDMN 808 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.315 Wide TiCN + Al2O3 + TiN

ANSI: GDMN 808 IC8250

ISO: GDMN 808 IC8250

$41.14
Picture of INGERSOLL TDIT8.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

INGERSOLL TDIT8.00E-0.80 TT5100 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.031 Corner Radius TiCN + Al2O3 + TiN

ANSI: TDIT8.00E-0.80 TT5100

ISO: TDIT8.00E-0.80 TT5100

$41.12
Picture of INGERSOLL TDIT8.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.031 Corner Radius TiCN

INGERSOLL TDIT8.00E-0.80 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.031 Corner Radius TiCN

ANSI: TDIT8.00E-0.80 TT7220

ISO: TDIT8.00E-0.80 TT7220

$41.12
Picture of INGERSOLL TDIT8.00E-1.20 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.047 Corner Radius TiCN

INGERSOLL TDIT8.00E-1.20 TT7220 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.047 Corner Radius TiCN

ANSI: TDIT8.00E-1.20 TT7220

ISO: TDIT8.00E-1.20 TT7220

$41.12
Picture of TUNGALOY DTE265-015 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.104 Wide

TUNGALOY DTE265-015 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.005 Corner Radius 0.104 Wide

ANSI: DTE265-015 AH725

ISO: DTE265-015 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTE265-015 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.005 Corner Radius 0.104 Wide

TUNGALOY DTE265-015 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.005 Corner Radius 0.104 Wide

ANSI: DTE265-015 GH130

ISO: DTE265-015 GH130

Call (262) 251-4020 for pricing
Picture of SECO LCMF160302-0300-MCL6 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160302-0300-MCL6 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160302-0300-MCL6 CP600

ISO: LCMF160302-0300-MCL6 CP600

Call (262) 251-4020 for pricing
Picture of SECO LCMF130304-0300-MC Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF130304-0300-MC Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF130304-0300-MC

ISO: LCMF130304-0300-MC

Call (262) 251-4020 for pricing
Picture of SECO LCMF160302-0300-MCL15 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160302-0300-MCL15 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160302-0300-MCL15 CP600

ISO: LCMF160302-0300-MCL15 CP600

Call (262) 251-4020 for pricing
Picture of SECO LCMF130302-0300-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF130302-0300-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF130302-0300-FT CP500

ISO: LCMF130302-0300-FT CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGF160302-0300-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCGF160302-0300-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCGF160302-0300-GS

ISO: LCGF160302-0300-GS

Call (262) 251-4020 for pricing
Picture of SECO LCMF160302-0300-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160302-0300-MT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160302-0300-MT CP500

ISO: LCMF160302-0300-MT CP500

Call (262) 251-4020 for pricing
Picture of SECO LCMF160302-0300-MCR6 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160302-0300-MCR6 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160302-0300-MCR6 CP600

ISO: LCMF160302-0300-MCR6 CP600

Call (262) 251-4020 for pricing
Picture of SECO LCMF160302-0300-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160302-0300-FT CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160302-0300-FT CP500

ISO: LCMF160302-0300-FT CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGF130302-0300-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

SECO LCGF130302-0300-GS Cut Off & Grooving Grooving,Groove Turning Insert Carbide

ANSI: LCGF130302-0300-GS

ISO: LCGF130302-0300-GS

Call (262) 251-4020 for pricing
Picture of SECO LCMF160302-0300-MCR15 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCMF160302-0300-MCR15 CP600 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCMF160302-0300-MCR15 CP600

ISO: LCMF160302-0300-MCR15 CP600

Call (262) 251-4020 for pricing
Picture of ISCAR GIPI 5.00E-0.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 5.00E-0.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 5.00E-0.50 IC8250

ISO: GIPI 5.00E-0.50 IC8250

$40.83
Picture of ISCAR GIPI 4.78-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 4.78-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 4.78-0.55 IC8250

ISO: GIPI 4.78-0.55 IC8250

$40.83
Picture of ISCAR GIFI 5.00E-0.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIFI 5.00E-0.50 IC8250 Cut Off,Grooving,Groove Turning Insert 0.020 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIFI 5.00E-0.50 IC8250

ISO: GIFI 5.00E-0.50 IC8250

$40.83
Picture of ISCAR GIFI 4.78-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIFI 4.78-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIFI 4.78-0.55 IC8250

ISO: GIFI 4.78-0.55 IC8250

$40.83
Picture of ISCAR GIFI 5.28-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.208 Wide TiCN + Al2O3 + TiN

ISCAR GIFI 5.28-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.208 Wide TiCN + Al2O3 + TiN

ANSI: GIFI 5.28-0.20 IC8250

ISO: GIFI 5.28-0.20 IC8250

$40.83
Picture of ISCAR GIF 5.00E-0.60 IC8250 Cut Off,Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIF 5.00E-0.60 IC8250 Cut Off,Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIF 5.00E-0.60 IC8250

ISO: GIF 5.00E-0.60 IC8250

$40.75
Picture of ISCAR GIF 4.45-0.15 IC8250 Cut Off,Grooving,Groove Turning Insert 0.006 Corner Radius 0.175 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.45-0.15 IC8250 Cut Off,Grooving,Groove Turning Insert 0.006 Corner Radius 0.175 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.45-0.15 IC8250

ISO: GIF 4.45-0.15 IC8250

$40.75
Picture of ISCAR GIF 4.78-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.78-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.78-0.55 IC8250

ISO: GIF 4.78-0.55 IC8250

$40.75
Picture of ISCAR GIP 4.78E-0.55 IC5010 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.78E-0.55 IC5010 Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.78E-0.55 IC5010

ISO: GIP 4.78E-0.55 IC5010

$40.75
Picture of ISCAR GIF 5.28-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.208 Wide TiCN + Al2O3 + TiN

ISCAR GIF 5.28-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.208 Wide TiCN + Al2O3 + TiN

ANSI: GIF 5.28-0.20 IC8250

ISO: GIF 5.28-0.20 IC8250

$40.75
Picture of ISCAR GIP 5.00E-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIP 5.00E-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIP 5.00E-0.80 IC5010

ISO: GIP 5.00E-0.80 IC5010

$40.75
Picture of ISCAR GIF 4.86-0.30 IC8250 Cut Off,Grooving,Groove Turning Insert 0.012 Corner Radius 0.191 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.86-0.30 IC8250 Cut Off,Grooving,Groove Turning Insert 0.012 Corner Radius 0.191 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.86-0.30 IC8250

ISO: GIF 4.86-0.30 IC8250

$40.75
Picture of ISCAR GIP 5.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIP 5.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIP 5.00E-0.40 IC8250

ISO: GIP 5.00E-0.40 IC8250

$40.75
Picture of ISCAR GIP 4.78E-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ISCAR GIP 4.78E-0.55 IC8250 Cut Off,Grooving,Groove Turning Insert 0.022 Corner Radius 0.188 Wide TiCN + Al2O3 + TiN

ANSI: GIP 4.78E-0.55 IC8250

ISO: GIP 4.78E-0.55 IC8250

$40.75
Picture of ISCAR GIF 5.39-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.212 Wide TiCN + Al2O3 + TiN

ISCAR GIF 5.39-0.20 IC8250 Cut Off,Grooving,Groove Turning Insert 0.008 Corner Radius 0.212 Wide TiCN + Al2O3 + TiN

ANSI: GIF 5.39-0.20 IC8250

ISO: GIF 5.39-0.20 IC8250

$40.75
Picture of ISCAR GIF 5.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIF 5.00E-0.40 IC8250 Grooving,Groove Turning Insert 0.016 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIF 5.00E-0.40 IC8250

ISO: GIF 5.00E-0.40 IC8250

$40.75
Picture of ISCAR GIP 5.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIP 5.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIP 5.00E-0.80 IC8250

ISO: GIP 5.00E-0.80 IC8250

$40.75
Picture of ISCAR GIP 5.00E-0.60 IC8250 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIP 5.00E-0.60 IC8250 Grooving,Groove Turning Insert 0.024 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIP 5.00E-0.60 IC8250

ISO: GIP 5.00E-0.60 IC8250

$40.75
Picture of ISCAR GIF 5.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIF 5.00E-0.80 IC8250 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIF 5.00E-0.80 IC8250

ISO: GIF 5.00E-0.80 IC8250

$40.75
Picture of ISCAR PENTA 17N080P040RS IC1008 Grooving,Groove Turning Insert 0.015 Corner Radius 0.031 Wide TiAIN + TiN

ISCAR PENTA 17N080P040RS IC1008 Grooving,Groove Turning Insert 0.015 Corner Radius 0.031 Wide TiAIN + TiN

ANSI: PENTA 17N080P040RS IC1008

ISO: PENTA 17N080P040RS IC1008

$40.63
Picture of ISCAR PENTA 17-200NP08RS IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius TiAIN + TiN

ISCAR PENTA 17-200NP08RS IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius TiAIN + TiN

ANSI: PENTA 17-200NP08RS IC1008

ISO: PENTA 17-200NP08RS IC1008

$40.63
Picture of ISCAR PENTA 17-100NP08RS IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius TiAIN + TiN

ISCAR PENTA 17-100NP08RS IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius TiAIN + TiN

ANSI: PENTA 17-100NP08RS IC1008

ISO: PENTA 17-100NP08RS IC1008

$40.63
Picture of ISCAR PENTA 17-100NP08LS IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius TiAIN + TiN

ISCAR PENTA 17-100NP08LS IC1008 Grooving,Groove Turning Insert 0.003 Corner Radius TiAIN + TiN

ANSI: PENTA 17-100NP08LS IC1008

ISO: PENTA 17-100NP08LS IC1008

$40.63
Picture of SECO LCMF160302-0300-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160302-0300-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160302-0300-MT TGP25

ISO: LCMF160302-0300-MT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF130304-0300-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF130304-0300-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF130304-0300-MC TGP25

ISO: LCMF130304-0300-MC TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF130304-0300-FT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF130304-0300-FT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF130304-0300-FT TGK1500

ISO: LCMF130304-0300-FT TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCMF130304-0300-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF130304-0300-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF130304-0300-FT TGP25

ISO: LCMF130304-0300-FT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMR160608-0600-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR160608-0600-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR160608-0600-FT TGP25

ISO: LCMR160608-0600-FT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160304-0300-MG TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160304-0300-MG TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160304-0300-MG TGP25

ISO: LCMF160304-0300-MG TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160304-0300-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160304-0300-MC TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160304-0300-MC TGP25

ISO: LCMF160304-0300-MC TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160304-0300-MT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160304-0300-MT TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160304-0300-MT TGK1500

ISO: LCMF160304-0300-MT TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCMF1902M0-0200-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF1902M0-0200-MP TGK1500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF1902M0-0200-MP TGK1500

ISO: LCMF1902M0-0200-MP TGK1500

Call (262) 251-4020 for pricing
Picture of SECO LCMR160608-0600-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMR160608-0600-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMR160608-0600-MT TGP25

ISO: LCMR160608-0600-MT TGP25

Call (262) 251-4020 for pricing
Picture of ISCAR GRIP 6030Y IC8250 Grooving,Groove Turning,Face Grooving Insert 0.118 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GRIP 6030Y IC8250 Grooving,Groove Turning,Face Grooving Insert 0.118 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GRIP 6030Y IC8250

ISO: GRIP 6030Y IC8250

$40.60
Picture of SECO LCMF160302-0300-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160302-0300-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160302-0300-FT TGP25

ISO: LCMF160302-0300-FT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160304-0300-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160304-0300-FT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160304-0300-FT TGP25

ISO: LCMF160304-0300-FT TGP25

Call (262) 251-4020 for pricing
Picture of SECO LCMF160304-0300-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

SECO LCMF160304-0300-MT TGP25 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiCN + Al2O3

ANSI: LCMF160304-0300-MT TGP25

ISO: LCMF160304-0300-MT TGP25

Call (262) 251-4020 for pricing
Picture of ISCAR GIPA 5.00-2.50 IC806 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN

ISCAR GIPA 5.00-2.50 IC806 Cut Off,Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN

ANSI: GIPA 5.00-2.50 IC806

ISO: GIPA 5.00-2.50 IC806

$40.45
Picture of TUNGALOY FLEX50L NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

TUNGALOY FLEX50L NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

ANSI: FLEX50L NS9530

ISO: FLEX50L NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY FLEX50R NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

TUNGALOY FLEX50R NS9530 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

ANSI: FLEX50R NS9530

ISO: FLEX50R NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY FLEX50R UX30 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

TUNGALOY FLEX50R UX30 Clamp Down Grooving,Groove Turning Insert 0.015 Corner Radius 0.197 Wide

ANSI: FLEX50R UX30

ISO: FLEX50R UX30

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR6-300 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.118 Corner Radius 0.236 Wide

TUNGALOY DTR6-300 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.118 Corner Radius 0.236 Wide

ANSI: DTR6-300 T9225

ISO: DTR6-300 T9225

Call (262) 251-4020 for pricing
Picture of SECO LCGN160507-0150L-D76 CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160507-0150L-D76 CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160507-0150L-D76 CP500

ISO: LCGN160507-0150L-D76 CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160502-0520-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160502-0520-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160502-0520-FG CP500

ISO: LCGN160502-0520-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160502-0500-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160502-0500-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160502-0500-FG CP500

ISO: LCGN160502-0500-FG CP500

Call (262) 251-4020 for pricing
Picture of ISCAR GIA 6.00K-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TIC + Al2O3

ISCAR GIA 6.00K-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TIC + Al2O3

ANSI: GIA 6.00K-0.80 IC428

ISO: GIA 6.00K-0.80 IC428

$39.75
Picture of ISCAR GIP 6.00E-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TIC + Al2O3

ISCAR GIP 6.00E-0.80 IC428 Grooving,Groove Turning Insert 0.031 Corner Radius 0.236 Wide TIC + Al2O3

ANSI: GIP 6.00E-0.80 IC428

ISO: GIP 6.00E-0.80 IC428

$39.75
Picture of ARNO ROUSE SE24-6030N-RP1 AP5020 Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius TiCN

ARNO ROUSE SE24-6030N-RP1 AP5020 Grooving,Groove Turning Insert 0.236 Wide 0.118 Corner Radius TiCN

ANSI: SE24-6030N-RP1 AP5020

ISO: SE24-6030N-RP1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LRD 080565FR AP5020 Groove Turning Insert 0.020 Wide Carbide TiCN

ARNO ROUSE LRD 080565FR AP5020 Groove Turning Insert 0.020 Wide Carbide TiCN

ANSI: LRD 080565FR AP5020

ISO: LRD 080565FR AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SE24-5025N-RP1 AP5020 Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiCN

ARNO ROUSE SE24-5025N-RP1 AP5020 Grooving,Groove Turning Insert 0.197 Wide 0.098 Corner Radius TiCN

ANSI: SE24-5025N-RP1 AP5020

ISO: SE24-5025N-RP1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA35-8008N-M1 AP5020 Grooving,Groove Turning Insert 0.314 Wide 0.031 Corner Radius TiCN

ARNO ROUSE SA35-8008N-M1 AP5020 Grooving,Groove Turning Insert 0.314 Wide 0.031 Corner Radius TiCN

ANSI: SA35-8008N-M1 AP5020

ISO: SA35-8008N-M1 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2000ER-S1-15G AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE SA24-2000ER-S1-15G AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: SA24-2000ER-S1-15G AP5020

ISO: SA24-2000ER-S1-15G AP5020

Call (262) 251-4020 for pricing
Picture of INGERSOLL TDC8 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.016 Corner Radius TiCN

INGERSOLL TDC8 TT8020 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.016 Corner Radius TiCN

ANSI: TDC8 TT8020

ISO: TDC8 TT8020

$39.61
Picture of INGERSOLL TDC8 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.016 Corner Radius TiAIN + TiN

INGERSOLL TDC8 TT9080 Face Grooving,Grooving,Groove Turning Insert 0.315 Wide 0.016 Corner Radius TiAIN + TiN

ANSI: TDC8 TT9080

ISO: TDC8 TT9080

$39.61
Picture of ARNO ROUSE SA24-2000EN-S1G AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE SA24-2000EN-S1G AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: SA24-2000EN-S1G AP5020

ISO: SA24-2000EN-S1G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FR-P AP4020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE LST 082040FR-P AP4020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: LST 082040FR-P AP4020

ISO: LST 082040FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081230FL-P AP5020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ARNO ROUSE LST 081230FL-P AP5020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ANSI: LST 081230FL-P AP5020

ISO: LST 081230FL-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502R-T1-G AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2502R-T1-G AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2502R-T1-G AP5020

ISO: SA24-2502R-T1-G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LVD 08-2FL-P AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LVD 08-2FL-P AP5020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LVD 08-2FL-P AP5020

ISO: LVD 08-2FL-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081230FR-P AP4020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ARNO ROUSE LST 081230FR-P AP4020 Grooving,Groove Turning Insert 0.047 Wide TiCN

ANSI: LST 081230FR-P AP4020

ISO: LST 081230FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2500ER-S1-15G AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE SA24-2500ER-S1-15G AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: SA24-2500ER-S1-15G AP5020

ISO: SA24-2500ER-S1-15G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LVD 08-2FL-P AP4020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LVD 08-2FL-P AP4020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LVD 08-2FL-P AP4020

ISO: LVD 08-2FL-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FL-P AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE LST 082040FL-P AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: LST 082040FL-P AP5020

ISO: LST 082040FL-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2000ER-S1-8G AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE SA24-2000ER-S1-8G AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: SA24-2000ER-S1-8G AP5020

ISO: SA24-2000ER-S1-8G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082560FR-P AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE LST 082560FR-P AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: LST 082560FR-P AP5020

ISO: LST 082560FR-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FR-P AP4020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE LST 081530FR-P AP4020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: LST 081530FR-P AP4020

ISO: LST 081530FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081025FR-P AP5020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ARNO ROUSE LST 081025FR-P AP5020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ANSI: LST 081025FR-P AP5020

ISO: LST 081025FR-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2500EL-S1-15G AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE SA24-2500EL-S1-15G AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: SA24-2500EL-S1-15G AP5020

ISO: SA24-2500EL-S1-15G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502R-S1-G AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-2502R-S1-G AP5020 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius TiCN

ANSI: SA24-2502R-S1-G AP5020

ISO: SA24-2502R-S1-G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FR-P AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE LST 081530FR-P AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: LST 081530FR-P AP5020

ISO: LST 081530FR-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FR-P AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE LST 082040FR-P AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: LST 082040FR-P AP5020

ISO: LST 082040FR-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2500EN-S1G AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE SA24-2500EN-S1G AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: SA24-2500EN-S1G AP5020

ISO: SA24-2500EN-S1G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1500EN-S1-G AK1020 Grooving,Groove Turning Insert 0.059 Wide

ARNO ROUSE SA24-1500EN-S1-G AK1020 Grooving,Groove Turning Insert 0.059 Wide

ANSI: SA24-1500EN-S1-G AK1020

ISO: SA24-1500EN-S1-G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065FR-P AP4020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ARNO ROUSE LST 083065FR-P AP4020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ANSI: LST 083065FR-P AP4020

ISO: LST 083065FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FL-P AP4020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE LST 081530FL-P AP4020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: LST 081530FL-P AP4020

ISO: LST 081530FL-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 083065FL-P AP4020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ARNO ROUSE LST 083065FL-P AP4020 Grooving,Groove Turning Insert 0.118 Wide TiCN

ANSI: LST 083065FL-P AP4020

ISO: LST 083065FL-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2500ER-S1-8G AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE SA24-2500ER-S1-8G AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: SA24-2500ER-S1-8G AP5020

ISO: SA24-2500ER-S1-8G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LRD 081060FL-SP AP4020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LRD 081060FL-SP AP4020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LRD 081060FL-SP AP4020

ISO: LRD 081060FL-SP AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082040FL-P AP4020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE LST 082040FL-P AP4020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: LST 082040FL-P AP4020

ISO: LST 082040FL-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2000EL-S1-15G AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ARNO ROUSE SA24-2000EL-S1-15G AP5020 Grooving,Groove Turning Insert 0.079 Wide TiCN

ANSI: SA24-2000EL-S1-15G AP5020

ISO: SA24-2000EL-S1-15G AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082560FR-P AP4020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE LST 082560FR-P AP4020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: LST 082560FR-P AP4020

ISO: LST 082560FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FL-P AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE LST 081530FL-P AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: LST 081530FL-P AP5020

ISO: LST 081530FL-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082560FL-P AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE LST 082560FL-P AP5020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: LST 082560FL-P AP5020

ISO: LST 082560FL-P AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LRD 081050FR-P AP4020 Groove Turning Insert 0.039 Wide Carbide TiCN

ARNO ROUSE LRD 081050FR-P AP4020 Groove Turning Insert 0.039 Wide Carbide TiCN

ANSI: LRD 081050FR-P AP4020

ISO: LRD 081050FR-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-3002R-S1-5 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ARNO ROUSE SA24-3002R-S1-5 AP5020 Grooving,Groove Turning Insert 0.118 Wide 0.008 Corner Radius TiCN

ANSI: SA24-3002R-S1-5 AP5020

ISO: SA24-3002R-S1-5 AP5020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 082560FL-P AP4020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ARNO ROUSE LST 082560FL-P AP4020 Grooving,Groove Turning Insert 0.098 Wide TiCN

ANSI: LST 082560FL-P AP4020

ISO: LST 082560FL-P AP4020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-1500EL-S1-15G AK1020 Grooving,Groove Turning Insert 0.059 Wide

ARNO ROUSE SA24-1500EL-S1-15G AK1020 Grooving,Groove Turning Insert 0.059 Wide

ANSI: SA24-1500EL-S1-15G AK1020

ISO: SA24-1500EL-S1-15G AK1020

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE SA24-2502R-S1-G AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius AlTiN

ARNO ROUSE SA24-2502R-S1-G AM5040 Grooving,Groove Turning Insert 0.098 Wide 0.008 Corner Radius AlTiN

ANSI: SA24-2502R-S1-G AM5040

ISO: SA24-2502R-S1-G AM5040

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081025FL-P AP4020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ARNO ROUSE LST 081025FL-P AP4020 Grooving,Groove Turning Insert 0.039 Wide TiCN

ANSI: LST 081025FL-P AP4020

ISO: LST 081025FL-P AP4020

Call (262) 251-4020 for pricing
Picture of ISCAR MIFR 10-2.50-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.098 Wide TiAlN

ISCAR MIFR 10-2.50-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.098 Wide TiAlN

ANSI: MIFR 10-2.50-0.20 IC908

ISO: MIFR 10-2.50-0.20 IC908

$39.44
Picture of ISCAR MIFR 10-3.00-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide TiAlN

ISCAR MIFR 10-3.00-0.20 IC908 Grooving,Groove Turning Insert 0.007 Corner Radius 0.118 Wide TiAlN

ANSI: MIFR 10-3.00-0.20 IC908

ISO: MIFR 10-3.00-0.20 IC908

$39.44
Picture of ISCAR SCIL 22-150NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAIN + TiN

ISCAR SCIL 22-150NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAIN + TiN

ANSI: SCIL 22-150NP05 IC1008

ISO: SCIL 22-150NP05 IC1008

$39.36
Picture of ISCAR SCIR 22-150NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAIN + TiN

ISCAR SCIR 22-150NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAIN + TiN

ANSI: SCIR 22-150NP05 IC1008

ISO: SCIR 22-150NP05 IC1008

$39.36
Picture of ISCAR SCIL 22-200NP05 IC1007 Cut Off, Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide TiAlN

ISCAR SCIL 22-200NP05 IC1007 Cut Off, Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide TiAlN

ANSI: SCIL 22-200NP05 IC1007

ISO: SCIL 22-200NP05 IC1007

$39.36
Picture of ISCAR SCIL 22-100NP08 IC1007 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.039 Wide TiAlN

ISCAR SCIL 22-100NP08 IC1007 Cut Off, Grooving,Groove Turning Insert 0.003 Corner Radius 0.039 Wide TiAlN

ANSI: SCIL 22-100NP08 IC1007

ISO: SCIL 22-100NP08 IC1007

$39.36
Picture of ISCAR SCIL 22-150NP05 IC1007 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAlN

ISCAR SCIL 22-150NP05 IC1007 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAlN

ANSI: SCIL 22-150NP05 IC1007

ISO: SCIL 22-150NP05 IC1007

$39.36
Picture of ISCAR SCIR 22-250NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide TiAIN + TiN

ISCAR SCIR 22-250NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide TiAIN + TiN

ANSI: SCIR 22-250NP05 IC1008

ISO: SCIR 22-250NP05 IC1008

$39.36
Picture of ISCAR SCIL 22-200NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR SCIL 22-200NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: SCIL 22-200NP05 IC1008

ISO: SCIL 22-200NP05 IC1008

$39.36
Picture of ISCAR SCIR 22-200NP05 IC1007 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide TiAlN

ISCAR SCIR 22-200NP05 IC1007 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide TiAlN

ANSI: SCIR 22-200NP05 IC1007

ISO: SCIR 22-200NP05 IC1007

$39.36
Picture of ISCAR SCIL 22-250NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide TiAIN + TiN

ISCAR SCIL 22-250NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide TiAIN + TiN

ANSI: SCIL 22-250NP05 IC1008

ISO: SCIL 22-250NP05 IC1008

$39.36
Picture of ISCAR SCIR 22-100NP08 IC1007 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.039 Wide TiAlN

ISCAR SCIR 22-100NP08 IC1007 Cut Off,Grooving,Groove Turning Insert 0.003 Corner Radius 0.039 Wide TiAlN

ANSI: SCIR 22-100NP08 IC1007

ISO: SCIR 22-100NP08 IC1007

$39.36
Picture of ISCAR SCIL 22-080NP00 IC1007 Cut Off,Grooving,Groove Turning Insert 0.031 Wide TiAlN

ISCAR SCIL 22-080NP00 IC1007 Cut Off,Grooving,Groove Turning Insert 0.031 Wide TiAlN

ANSI: SCIL 22-080NP00 IC1007

ISO: SCIL 22-080NP00 IC1007

$39.36
Picture of ISCAR SCIR 22-200NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide TiAIN + TiN

ISCAR SCIR 22-200NP05 IC1008 Grooving,Groove Turning Insert 0.002 Corner Radius 0.079 Wide TiAIN + TiN

ANSI: SCIR 22-200NP05 IC1008

ISO: SCIR 22-200NP05 IC1008

$39.36
Picture of ISCAR SCIR 22-080NP00 IC1007 Cut Off,Grooving,Groove Turning Insert 0.031 Wide TiAlN

ISCAR SCIR 22-080NP00 IC1007 Cut Off,Grooving,Groove Turning Insert 0.031 Wide TiAlN

ANSI: SCIR 22-080NP00 IC1007

ISO: SCIR 22-080NP00 IC1007

$39.36
Picture of ISCAR SCIR 22-150N-00 IC1008 Grooving,Groove Turning Insert 0.059 Wide TiAIN + TiN

ISCAR SCIR 22-150N-00 IC1008 Grooving,Groove Turning Insert 0.059 Wide TiAIN + TiN

ANSI: SCIR 22-150N-00 IC1008

ISO: SCIR 22-150N-00 IC1008

$39.36
Picture of ISCAR SCIL 22-250NP05 IC1007 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide TiAlN

ISCAR SCIL 22-250NP05 IC1007 Cut Off,Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide TiAlN

ANSI: SCIL 22-250NP05 IC1007

ISO: SCIL 22-250NP05 IC1007

$39.36
Picture of ISCAR SCIR 22-150NP05 IC1007 Cut Off, Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAlN

ISCAR SCIR 22-150NP05 IC1007 Cut Off, Grooving,Groove Turning Insert 0.002 Corner Radius 0.059 Wide TiAlN

ANSI: SCIR 22-150NP05 IC1007

ISO: SCIR 22-150NP05 IC1007

$39.36
Picture of ISCAR SCIR 22-250NP05 IC1007 Cut Off, Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide TiAlN

ISCAR SCIR 22-250NP05 IC1007 Cut Off, Grooving,Groove Turning Insert 0.002 Corner Radius 0.098 Wide TiAlN

ANSI: SCIR 22-250NP05 IC1007

ISO: SCIR 22-250NP05 IC1007

$39.36
Picture of TUNGALOY DGIM2-020 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.079 Wide

TUNGALOY DGIM2-020 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.079 Wide

ANSI: DGIM2-020 T9225

ISO: DGIM2-020 T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY DGIS2-020 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.079 Wide

TUNGALOY DGIS2-020 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.007 Corner Radius 0.079 Wide

ANSI: DGIS2-020 T9225

ISO: DGIS2-020 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR FSPA 80-40YZ IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR FSPA 80-40YZ IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: FSPA 80-40YZ IC20

ISO: FSPA 80-40YZ IC20

$39.05
Picture of ISCAR FSPA 80-40 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ISCAR FSPA 80-40 IC20 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide

ANSI: FSPA 80-40 IC20

ISO: FSPA 80-40 IC20

$39.05
Picture of ISCAR GDMY 840 IC830 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide AlTiN + TiN

ISCAR GDMY 840 IC830 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide AlTiN + TiN

ANSI: GDMY 840 IC830

ISO: GDMY 840 IC830

$39.05
Picture of ISCAR GDMY 840 IC806 Cut Off,Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide AlTiN

ISCAR GDMY 840 IC806 Cut Off,Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide AlTiN

ANSI: GDMY 840 IC806

ISO: GDMY 840 IC806

$39.05
Picture of ISCAR GIA 5.00K-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ISCAR GIA 5.00K-0.80 IC5010 Grooving,Groove Turning Insert 0.031 Corner Radius 0.197 Wide TiCN + Al2O3 + TiN

ANSI: GIA 5.00K-0.80 IC5010

ISO: GIA 5.00K-0.80 IC5010

$39.05
Picture of ISCAR GDMY 840F IC808 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GDMY 840F IC808 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GDMY 840F IC808

ISO: GDMY 840F IC808

$39.05
Picture of ISCAR GDMY 840 IC808 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ISCAR GDMY 840 IC808 Grooving,Groove Turning Insert 0.157 Corner Radius 0.315 Wide TiAlN + AlTiN + TiN

ANSI: GDMY 840 IC808

ISO: GDMY 840 IC808

$39.05
Picture of TUNGALOY DTF3-040-R T9225 Clamp Down Grooving,Groove Turning,Face Grooving Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTF3-040-R T9225 Clamp Down Grooving,Groove Turning,Face Grooving Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTF3-040-R T9225

ISO: DTF3-040-R T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTF3-040-L T9225 Clamp Down Grooving,Groove Turning,Face Grooving Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

TUNGALOY DTF3-040-L T9225 Clamp Down Grooving,Groove Turning,Face Grooving Insert TI + Al2O3 0.015 Corner Radius 0.118 Wide

ANSI: DTF3-040-L T9225

ISO: DTF3-040-L T9225

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX3-030 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.011 Corner Radius 0.118 Wide

TUNGALOY DTX3-030 T9225 Clamp Down Grooving,Groove Turning Insert TI + Al2O3 0.011 Corner Radius 0.118 Wide

ANSI: DTX3-030 T9225

ISO: DTX3-030 T9225

Call (262) 251-4020 for pricing
Picture of ISCAR GIFI 5.00E-2.50 IC830 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIFI 5.00E-2.50 IC830 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIFI 5.00E-2.50 IC830

ISO: GIFI 5.00E-2.50 IC830

$38.90
Picture of ISCAR GIF 5.00E-2.50 IC830 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN + TiN

ISCAR GIF 5.00E-2.50 IC830 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide AlTiN + TiN

ANSI: GIF 5.00E-2.50 IC830

ISO: GIF 5.00E-2.50 IC830

$38.90
Picture of ISCAR GIF 4.78-2.39 IC808 Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiAlN + AlTiN + TiN

ISCAR GIF 4.78-2.39 IC808 Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide TiAlN + AlTiN + TiN

ANSI: GIF 4.78-2.39 IC808

ISO: GIF 4.78-2.39 IC808

$38.90
Picture of ISCAR GIFI 5.00E-2.50 IC808 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ISCAR GIFI 5.00E-2.50 IC808 Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide TiAlN + AlTiN + TiN

ANSI: GIFI 5.00E-2.50 IC808

ISO: GIFI 5.00E-2.50 IC808

$38.90
Picture of ISCAR GRIP 635-080Y IC8250 Grooving,Groove Turning,Face Grooving Insert 0.031 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ISCAR GRIP 635-080Y IC8250 Grooving,Groove Turning,Face Grooving Insert 0.031 Corner Radius 0.250 Wide TiCN + Al2O3 + TiN

ANSI: GRIP 635-080Y IC8250

ISO: GRIP 635-080Y IC8250

$38.82
Picture of ISCAR GRIP 6005Y IC8250 Grooving,Groove Turning,Face Grooving Insert 0.020 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ISCAR GRIP 6005Y IC8250 Grooving,Groove Turning,Face Grooving Insert 0.020 Corner Radius 0.236 Wide TiCN + Al2O3 + TiN

ANSI: GRIP 6005Y IC8250

ISO: GRIP 6005Y IC8250

$38.82
Picture of ARNO ROUSE SA35-4004N-ALU AN1015 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius

ARNO ROUSE SA35-4004N-ALU AN1015 Grooving,Groove Turning Insert 0.156 Wide 0.016 Corner Radius

ANSI: SA35-4004N-ALU AN1015

ISO: SA35-4004N-ALU AN1015

Call (262) 251-4020 for pricing
Picture of ARNO ROUSE LST 081530FR AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ARNO ROUSE LST 081530FR AP5020 Grooving,Groove Turning Insert 0.059 Wide TiCN

ANSI: LST 081530FR AP5020

ISO: LST 081530FR AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR MEFL 8-1.60-0.80 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.063 Wide TiAlN

ISCAR MEFL 8-1.60-0.80 IC908 Grooving,Groove Turning Insert 0.031 Corner Radius 0.063 Wide TiAlN

ANSI: MEFL 8-1.60-0.80 IC908

ISO: MEFL 8-1.60-0.80 IC908

$38.67
Picture of ISCAR TAGB 1260Y IC8250 Grooving,Groove Turning Insert 0.236 Corner Radius 0.472 Wide TiCN + Al2O3 + TiN

ISCAR TAGB 1260Y IC8250 Grooving,Groove Turning Insert 0.236 Corner Radius 0.472 Wide TiCN + Al2O3 + TiN

ANSI: TAGB 1260Y IC8250

ISO: TAGB 1260Y IC8250

$38.65
Picture of ISCAR TAGB 1260H IC8250 Grooving,Groove Turning Insert 0.236 Corner Radius 0.472 Wide TiCN + Al2O3 + TiN

ISCAR TAGB 1260H IC8250 Grooving,Groove Turning Insert 0.236 Corner Radius 0.472 Wide TiCN + Al2O3 + TiN

ANSI: TAGB 1260H IC8250

ISO: TAGB 1260H IC8250

$38.65
Picture of TUNGALOY DTX4-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

TUNGALOY DTX4-040 GH130 Clamp Down Grooving,Groove Turning Insert TiCNO 0.015 Corner Radius 0.157 Wide

ANSI: DTX4-040 GH130

ISO: DTX4-040 GH130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTX4-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

TUNGALOY DTX4-040 AH725 Clamp Down Grooving,Groove Turning Insert AlTiN 0.015 Corner Radius 0.157 Wide

ANSI: DTX4-040 AH725

ISO: DTX4-040 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR500-250 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

TUNGALOY DTR500-250 NS9530 Clamp Down Grooving,Groove Turning Insert 0.098 Corner Radius 0.197 Wide

ANSI: DTR500-250 NS9530

ISO: DTR500-250 NS9530

Call (262) 251-4020 for pricing
Picture of TUNGALOY DTR478-239 NS9530 Clamp Down Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide

TUNGALOY DTR478-239 NS9530 Clamp Down Grooving,Groove Turning Insert 0.094 Corner Radius 0.188 Wide

ANSI: DTR478-239 NS9530

ISO: DTR478-239 NS9530

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-G60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-G60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-G60R

ISO: LCEX1105-G60R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-2.0ISOL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-2.0ISOL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-2.0ISOL

ISO: LCEX1105-2.0ISOL CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-1.0ISOL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-1.0ISOL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-1.0ISOL

ISO: LCEX1105-1.0ISOL CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-1.0ISOR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-1.0ISOR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-1.0ISOR

ISO: LCEX1105-1.0ISOR CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-A60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-A60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-A60R

ISO: LCEX1105-A60R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-1.5ISOR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-1.5ISOR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-1.5ISOR

ISO: LCEX1105-1.5ISOR CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-AG60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-AG60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-AG60L

ISO: LCEX1105-AG60L CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-G60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-G60L Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-G60L

ISO: LCEX1105-G60L CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-1.5ISOL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-1.5ISOL Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-1.5ISOL

ISO: LCEX1105-1.5ISOL CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-AG60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-AG60R Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-AG60R

ISO: LCEX1105-AG60R CP500

Call (262) 251-4020 for pricing
Picture of SECO LCEX1105-2.0ISOR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCEX1105-2.0ISOR Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCEX1105-2.0ISOR

ISO: LCEX1105-2.0ISOR CP500

Call (262) 251-4020 for pricing
Picture of TUNGALOY CGD500 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.197 Wide

TUNGALOY CGD500 NS9530 Clamp Down Grooving,Groove Turning Insert 0.007 Corner Radius 0.197 Wide

ANSI: CGD500 NS9530

ISO: CGD500 NS9530

Call (262) 251-4020 for pricing
Picture of SECO LCGN160402-0440-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160402-0440-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160402-0440-FG CP500

ISO: LCGN160402-0440-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160402-0420-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160402-0420-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160402-0420-FG CP500

ISO: LCGN160402-0420-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160405-0240-DY CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160405-0240-DY CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160405-0240-DY CP500

ISO: LCGN160405-0240-DY CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160402-0400-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160402-0400-FG CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160402-0400-FG CP500

ISO: LCGN160402-0400-FG CP500

Call (262) 251-4020 for pricing
Picture of SECO LCGN160405-0265-DY CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

SECO LCGN160405-0265-DY CP500 Cut Off & Grooving Grooving,Groove Turning Insert Carbide TiAIN + TiN

ANSI: LCGN160405-0265-DY CP500

ISO: LCGN160405-0265-DY CP500

Call (262) 251-4020 for pricing
Picture of ISCAR GIPI 3.96-1.98 IC8250 Cut Off,Grooving,Groove Turning Insert 0.078 Corner Radius 0.156 Wide TiCN + Al2O3 + TiN

ISCAR GIPI 3.96-1.98 IC8250 Cut Off,Grooving,Groove Turning Insert 0.078 Corner Radius 0.156 Wide TiCN + Al2O3 + TiN

ANSI: GIPI 3.96-1.98 IC8250

ISO: GIPI 3.96-1.98 IC8250

$37.97
Picture of ARNO ROUSE SA16-1501R-S1-15 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.004 Corner Radius TiCN

ARNO ROUSE SA16-1501R-S1-15 AP5020 Grooving,Groove Turning Insert 0.059 Wide 0.004 Corner Radius TiCN

ANSI: SA16-1501R-S1-15 AP5020

ISO: SA16-1501R-S1-15 AP5020

Call (262) 251-4020 for pricing
Picture of ISCAR GIF 4.00E-2.00 IC8250 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ISCAR GIF 4.00E-2.00 IC8250 Cut Off,Grooving,Groove Turning Insert 0.079 Corner Radius 0.157 Wide TiCN + Al2O3 + TiN

ANSI: GIF 4.00E-2.00 IC8250

ISO: GIF 4.00E-2.00 IC8250

$37.89