Agricultural

Sort by
Picture of ISCAR ICK 0768 IC907 .768" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0768 IC907 .768" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0768 IC907

$119.71
Picture of ISCAR ICK 0717 IC908 .717" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0717 IC908 .717" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0717 IC908

$119.71
Picture of ISCAR ICK 0768 IC908 .768" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0768 IC908 .768" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0768 IC908

$119.71
Picture of ISCAR ICK 0736 IC907 .736" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0736 IC907 .736" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0736 IC907

$119.71
Picture of ISCAR ICK 0760 IC908 .760" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0760 IC908 .760" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0760 IC908

$119.71
Picture of ISCAR ICK 0780 IC908 .780" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0780 IC908 .780" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0780 IC908

$119.71
Picture of ISCAR ICK 0713 IC907 .713" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0713 IC907 .713" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0713 IC907

$119.71
Picture of ISCAR ICK 0713 IC908 .713" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0713 IC908 .713" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0713 IC908

$119.71
Picture of ISCAR ICK 0776 IC908 .776" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0776 IC908 .776" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0776 IC908

$119.71
Picture of ISCAR ICK 0787 IC907 .787" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0787 IC907 .787" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0787 IC907

$119.71
Picture of ISCAR ICK 0772 IC908 .772" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0772 IC908 .772" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0772 IC908

$119.71
Picture of ISCAR ICK 0724 IC908 .724" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0724 IC908 .724" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0724 IC908

$119.71
Picture of ISCAR ICK 0764 IC907 .764" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0764 IC907 .764" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0764 IC907

$119.71
Picture of ISCAR ICK 0752 IC907 .752" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0752 IC907 .752" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0752 IC907

$119.71
Picture of YMW 384927 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.5P-3.5P HSSE-V Uncoated

YMW 384927 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.5P-3.5P HSSE-V Uncoated

Call (262) 251-4020 for pricing
Picture of YMW 384927B 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.5P-3.5P HSSE-V Steam Oxide

YMW 384927B 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.5P-3.5P HSSE-V Steam Oxide

Call (262) 251-4020 for pricing
Picture of AWARD TL-106-CB DIA 3/32 SH 0.6250 LOC 1.50 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD TL-106-CB DIA 3/32 SH 0.6250 LOC 1.50 OAL 4.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD KX-309-CO DIA 3/16 SH 0.3750 LOC 2.2500 OAL 4.00 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD KX-309-CO DIA 3/16 SH 0.3750 LOC 2.2500 OAL 4.00 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of ISCAR ECI-H7 500-1.0SL500CF-3.5 IC902 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End 45.0° Chamfer SolidMill

ISCAR ECI-H7 500-1.0SL500CF-3.5 IC902 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide TiAlN Single End 45.0° Chamfer SolidMill

$119.60
Picture of YG-1 BI705 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Hardslick

YG-1 BI705 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Hardslick

$119.48
Picture of YG-1 BI723 3/4-16.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Hardslick

YG-1 BI723 3/4-16.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Hardslick

$119.48
Picture of YG-1 BI703 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Hardslick

YG-1 BI703 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Hardslick

$119.48
Picture of YG-1 BI725 3/4-16.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Hardslick

YG-1 BI725 3/4-16.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Hardslick

$119.48
Picture of TUNGALOY VSTD08L070S05-S DIA 8MM SH 0.3150 LOC 2.7559 OAL 2.7559Replacable Head Acc. Straight Shank/Slotting Heads Steel Single End TUNG MEISTER

TUNGALOY VSTD08L070S05-S DIA 8MM SH 0.3150 LOC 2.7559 OAL 2.7559Replacable Head Acc. Straight Shank/Slotting Heads Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEB030A2-045/08C6M50 AH750 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

TUNGALOY TEB030A2-045/08C6M50 AH750 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEB030A2-045/10C6M50 AH750 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

TUNGALOY TEB030A2-045/10C6M50 AH750 DIA 3MM SH 0.2362 LOC 0.1770 OAL 1.9685 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VSSD08L060S05-S DIA 7.60MM SH 0.3150 LOC 0.5906 OAL 2.362Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End TUNG MEISTER

TUNGALOY VSSD08L060S05-S DIA 7.60MM SH 0.3150 LOC 0.5906 OAL 2.362Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VSSD12L055W05-S DIA 7.60MM SH 0.4724 LOC 0.1496 OAL 2.165Replacable Head Acc. Straight Neck/Weldon Shank Steel Single End TUNG MEISTER

TUNGALOY VSSD12L055W05-S DIA 7.60MM SH 0.4724 LOC 0.1496 OAL 2.165Replacable Head Acc. Straight Neck/Weldon Shank Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of IMCO 68015 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Ball Nose Pow-R-Feed Mill

IMCO 68015 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Ball Nose Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT025018 M16-1.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiN

WIDIA/KENNAMETAL GT025018 M16-1.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiN

Call (262) 251-4020 for pricing
Picture of EMUGE 3440.04010A DIA 1MM SH 0.2362 LOC 0.7874 OAL 2.4409 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3440.04010A DIA 1MM SH 0.2362 LOC 0.7874 OAL 2.4409 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

$119.37
Picture of EMUGE 3440.08005A DIA 0.50MM SH 0.2362 LOC 0.7087 OAL 2.440 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3440.08005A DIA 0.50MM SH 0.2362 LOC 0.7087 OAL 2.440 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

$119.37
Picture of REGAL 008850AS 5/16-18.00TPI Nut Tap Nut 10.0P HSS Uncoated

REGAL 008850AS 5/16-18.00TPI Nut Tap Nut 10.0P HSS Uncoated

Call (262) 251-4020 for pricing
Picture of AWARD W-103-CB DIA 3/32 SH 0.7500 LOC 0.7500 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD W-103-CB DIA 3/32 SH 0.7500 LOC 0.7500 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD BKX-1221TIN DIA 3/4 SH 1.00 LOC 5.2500 OAL 7.7500 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BKX-1221TIN DIA 3/4 SH 1.00 LOC 5.2500 OAL 7.7500 End Mill Taper Flute HSS TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of INGERSOLL ER20T05SA-02 0.3 Screw ON ER STEEL T05Replacable Head Acc. ER 20 Steel Single End CHIPSURFER

INGERSOLL ER20T05SA-02 0.3 Screw ON ER STEEL T05Replacable Head Acc. ER 20 Steel Single End CHIPSURFER

$119.21
Picture of WIDIA/KENNAMETAL GT305115 M18-1.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN

WIDIA/KENNAMETAL GT305115 M18-1.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN

Call (262) 251-4020 for pricing
Picture of IMCO 63684 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

IMCO 63684 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.5984 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of YG-1 60457 DIA 1-1/2 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 60457 DIA 1-1/2 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

$119.06
Picture of YG-1 60461 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

YG-1 60461 DIA 1-1/2 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt Uncoated Single End Square Sharp General Purpose

$119.06
Picture of WIDIN SSDL091 9.10MM DIA 118° Point 2 Flute 8XD Drill

WIDIN SSDL091 9.10MM DIA 118° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of WIDIN SSDL093 9.30MM DIA 118° Point 2 Flute 8XD Drill

WIDIN SSDL093 9.30MM DIA 118° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of WIDIN SSDL095 9.50MM DIA 118° Point 2 Flute 8XD Drill

WIDIN SSDL095 9.50MM DIA 118° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of WIDIN SSDL092 9.20MM DIA 118° Point 2 Flute 8XD Drill

WIDIN SSDL092 9.20MM DIA 118° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of WIDIN SSDL094 9.40MM DIA 118° Point 2 Flute 8XD Drill

WIDIN SSDL094 9.40MM DIA 118° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of AWARD L-813-CO DIA 1/2 SH 0.7500 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD L-813-CO DIA 1/2 SH 0.7500 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD L-813B-CO DIA 1/2 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD L-813B-CO DIA 1/2 SH 0.6250 LOC 3.2500 OAL 5.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT275038 M14-1.50MM Roll Form Bottoming 1.0P-2.0P HSSE TiCN

WIDIA/KENNAMETAL GT275038 M14-1.50MM Roll Form Bottoming 1.0P-2.0P HSSE TiCN

Call (262) 251-4020 for pricing
Picture of IMCO 63342 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp Pow-R-Feed Mill

IMCO 63342 DIA 1/2 SH 0.50 LOC 1.2500 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Square Sharp Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of YG-1 65426CN DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Cobalt TiN Single End Square Sharp General Purpose

YG-1 65426CN DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Cobalt TiN Single End Square Sharp General Purpose

$118.99
Picture of YG-1 62422CC DIA 1 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Cobalt TiCN Single End Square Sharp General Purpose

YG-1 62422CC DIA 1 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Cobalt TiCN Single End Square Sharp General Purpose

$118.94
Picture of YG-1 62422CF DIA 1 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Cobalt TiAlN Single End Square Sharp General Purpose

YG-1 62422CF DIA 1 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Cobalt TiAlN Single End Square Sharp General Purpose

$118.94
Picture of TUNGALOY TECR080B4L-16/24W08-63 AH725 DIA 8MM SH 0.3150 LOC 0.6299 OAL 2.4803 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TECR080B4L-16/24W08-63 AH725 DIA 8MM SH 0.3150 LOC 0.6299 OAL 2.4803 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of ISCAR ECI-E-4R 500-1.0-C020 IC900 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0200 0.51MM SolidMill

ISCAR ECI-E-4R 500-1.0-C020 IC900 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0200 0.51MM SolidMill

$118.86
Picture of ISCAR ECSI-E-3 625-687-W625 IC900 DIA 5/8 SH 0.6250 LOC 0.6870 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End 45.0° Chamfer SolidMill

ISCAR ECSI-E-3 625-687-W625 IC900 DIA 5/8 SH 0.6250 LOC 0.6870 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End 45.0° Chamfer SolidMill

$118.86
Picture of ISCAR ECAI-H3R 375-600/1.8C06CF IC08 DIA 3/8 SH 0.3750 LOC 0.60 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM CHATTERFREE

ISCAR ECAI-H3R 375-600/1.8C06CF IC08 DIA 3/8 SH 0.3750 LOC 0.60 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0600 1.52MM CHATTERFREE

$118.86
Picture of ISCAR ECI-E-4R 500-1.0-C010 IC900 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0100 0.25MM SolidMill

ISCAR ECI-E-4R 500-1.0-C010 IC900 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0100 0.25MM SolidMill

$118.86
Picture of ISCAR ECAI-H3R 375-600/1.8C02CF IC08 DIA 3/8 SH 0.3750 LOC 0.60 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM CHATTERFREE

ISCAR ECAI-H3R 375-600/1.8C02CF IC08 DIA 3/8 SH 0.3750 LOC 0.60 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0200 0.51MM CHATTERFREE

$118.86
Picture of ISCAR ECAI-H4R 375-562/1.8C01CF IC08 DIA 3/8 SH 0.3750 LOC 0.5620 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM SolidMill

ISCAR ECAI-H4R 375-562/1.8C01CF IC08 DIA 3/8 SH 0.3750 LOC 0.5620 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0100 0.25MM SolidMill

$118.86
Picture of ISCAR ECI-E-4R 500-1.0-C030 IC900 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM SolidMill

ISCAR ECI-E-4R 500-1.0-C030 IC900 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0300 0.76MM SolidMill

$118.86
Picture of ISCAR ECAI-H3R 375-600/1.8C03CF IC08 DIA 3/8 SH 0.3750 LOC 0.60 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM CHATTERFREE

ISCAR ECAI-H3R 375-600/1.8C03CF IC08 DIA 3/8 SH 0.3750 LOC 0.60 OAL 3.00 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0300 0.76MM CHATTERFREE

$118.86
Picture of ISCAR ECI-E-4R 500-1.0-C060 IC900 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM SolidMill

ISCAR ECI-E-4R 500-1.0-C060 IC900 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0600 1.52MM SolidMill

$118.86
Picture of ISCAR ECSI-E-3 625-687-C625 IC900 DIA 5/8 SH 0.6250 LOC 0.6870 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End 45.0° Chamfer SolidMill

ISCAR ECSI-E-3 625-687-C625 IC900 DIA 5/8 SH 0.6250 LOC 0.6870 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End 45.0° Chamfer SolidMill

$118.86
Picture of ISCAR MM ER3.0/125-6.5-4T08 IC908 DIA 6.50MM SH T08 OAL 0.9114 Corner Rounder ,Replacable Head Carbide TiAlN Single End Corner Rounder 0.1180 3.00MM MULTI-MASTER

ISCAR MM ER3.0/125-6.5-4T08 IC908 DIA 6.50MM SH T08 OAL 0.9114 Corner Rounder ,Replacable Head Carbide TiAlN Single End Corner Rounder 0.1180 3.00MM MULTI-MASTER

$118.86
Picture of ISCAR ECI-E-4 625-1.0-C625 IC900 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp SolidMill

ISCAR ECI-E-4 625-1.0-C625 IC900 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp SolidMill

$118.78
Picture of REGAL 015080AS 5/8-11.00TPI Cut Spiral Point Plug 4.0P-5.0P HSS Uncoated

REGAL 015080AS 5/8-11.00TPI Cut Spiral Point Plug 4.0P-5.0P HSS Uncoated

Call (262) 251-4020 for pricing
Picture of YG-1 44040 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide Uncoated Single End Square Sharp Alu-Power End Mill

YG-1 44040 DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Carbide Uncoated Single End Square Sharp Alu-Power End Mill

$118.73
Picture of YG-1 BF725 3/4-16.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Steam Oxide

YG-1 BF725 3/4-16.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Steam Oxide

$118.65
Picture of YG-1 BF705 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Steam Oxide

YG-1 BF705 3/4-10.00TPI Cut Spiral Flute Mod Bottom 2.0P-3.0P Super HSS Steam Oxide

$118.65
Picture of AWARD T-0003-COTIN DIA 1/32 SH 0.3750 LOC 0.7500 OAL 2.7500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD T-0003-COTIN DIA 1/32 SH 0.3750 LOC 0.7500 OAL 2.7500 End Mill Taper Flute Cobalt TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 4V0513005SW DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp VariMill I

HANITA/WIDIA 4V0513005SW DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp VariMill I

Call (262) 251-4020 for pricing
Picture of IMCO 67213 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Square Sharp Pow-R-Feed Mill

IMCO 67213 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Square Sharp Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1402557 M14-1.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1402557 M14-1.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of YG-1 69359CC DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Roughing Flute Standard Helix Cobalt TiCN Single End Ball Nose General Purpose

YG-1 69359CC DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Roughing Flute Standard Helix Cobalt TiCN Single End Ball Nose General Purpose

$118.51
Picture of YG-1 69359CF DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Roughing Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

YG-1 69359CF DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Roughing Flute Standard Helix Cobalt TiAlN Single End Ball Nose General Purpose

$118.51
Picture of YG-1 78524PE DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal TiAlN Single End Square Sharp ASP

YG-1 78524PE DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal TiAlN Single End Square Sharp ASP

$118.48
Picture of YG-1 78524PH DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal Hardslick Single End Square Sharp ASP

YG-1 78524PH DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal Hardslick Single End Square Sharp ASP

$118.48
Picture of MICRO 100 TM-360-16X Thread Mill 12.00TPI-32.00TPI UN

MICRO 100 TM-360-16X Thread Mill 12.00TPI-32.00TPI UN

Call (262) 251-4020 for pricing
Picture of MICRO 100 TM-290-16X Thread Mill 14.00TPI-40.00TPI UN

MICRO 100 TM-290-16X Thread Mill 14.00TPI-40.00TPI UN

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE050L37R015-U04S08 AH725 DIA 1/2 SH T06 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0150 0.38MM TUNG MEISTER

TUNGALOY VEE050L37R015-U04S08 AH725 DIA 1/2 SH T06 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0150 0.38MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VED050L37R015-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0150 0.38MM TUNG MEISTER

TUNGALOY VED050L37R015-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0150 0.38MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VRD037L19R062-U06S06 AH725 DIA 3/8 SH T10 LOC 0.1900 OAL 0.5100End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0620 1.57MM TUNG MEISTER

TUNGALOY VRD037L19R062-U06S06 AH725 DIA 3/8 SH T10 LOC 0.1900 OAL 0.5100End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0620 1.57MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VRD037L19R125-U06S06 AH725 DIA 3/8 SH T06 LOC 0.1900 OAL 0.5100End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1250 3.18MM TUNG MEISTER

TUNGALOY VRD037L19R125-U06S06 AH725 DIA 3/8 SH T06 LOC 0.1900 OAL 0.5100End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1250 3.18MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE050L37R000-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Square TUNG MEISTER

TUNGALOY VEE050L37R000-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Square TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VED050L37R031-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM TUNG MEISTER

TUNGALOY VED050L37R031-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE050L37R062-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0620 1.57MM TUNG MEISTER

TUNGALOY VEE050L37R062-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0620 1.57MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VRD037L19R031-U06S06 AH725 DIA 3/8 SH T08 LOC 0.1900 OAL 0.5100End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM TUNG MEISTER

TUNGALOY VRD037L19R031-U06S06 AH725 DIA 3/8 SH T08 LOC 0.1900 OAL 0.5100End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE050L37R031-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM TUNG MEISTER

TUNGALOY VEE050L37R031-U04S08 AH725 DIA 1/2 SH T05 LOC 0.3740 OAL 0.6500End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of EMUGE 3441.08010A DIA 2MM SH 0.0787 LOC 0.5906 OAL 2.4409 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

EMUGE 3441.08010A DIA 2MM SH 0.0787 LOC 0.5906 OAL 2.4409 End Mill Taper Flute Carbide Uncoated Single End Ball Nose Turbine Program

$118.41
Picture of INGERSOLL ER16T06SA-02 0.364 Screw ON ER STEEL T06Replacable Head Acc. ER 16 Steel Single End CHIPSURFER

INGERSOLL ER16T06SA-02 0.364 Screw ON ER STEEL T06Replacable Head Acc. ER 16 Steel Single End CHIPSURFER

$118.31
Picture of INGERSOLL ER20T05SA-05 0.3 Screw ON ER STEEL T05Replacable Head Acc. ER 20 Steel Single End CHIPSURFER

INGERSOLL ER20T05SA-05 0.3 Screw ON ER STEEL T05Replacable Head Acc. ER 20 Steel Single End CHIPSURFER

$118.31
Picture of YMW 389627 3/4-10.00TPI Cut Spiral Point Plug 4.0P-6.0P Cobalt M42 Uncoated

YMW 389627 3/4-10.00TPI Cut Spiral Point Plug 4.0P-6.0P Cobalt M42 Uncoated

Call (262) 251-4020 for pricing
Picture of YMW 389628 3/4-16.00TPI Cut Spiral Point Plug 4.0P-6.0P Cobalt M42 Uncoated

YMW 389628 3/4-16.00TPI Cut Spiral Point Plug 4.0P-6.0P Cobalt M42 Uncoated

Call (262) 251-4020 for pricing
Picture of YG-1 75540PE DIA 1 SH 1.00 LOC 1.00 OAL 3.50 End Mill Powder Metal TiAlN Single End Square Sharp ASP

YG-1 75540PE DIA 1 SH 1.00 LOC 1.00 OAL 3.50 End Mill Powder Metal TiAlN Single End Square Sharp ASP

$118.21
Picture of YG-1 75540PH DIA 1 SH 1.00 LOC 1.00 OAL 3.50 End Mill Powder Metal Hardslick Single End Square Sharp ASP

YG-1 75540PH DIA 1 SH 1.00 LOC 1.00 OAL 3.50 End Mill Powder Metal Hardslick Single End Square Sharp ASP

$118.21
Picture of EMUGE BU51C400.5715 Tap 3/8-24.00TPI Bottoming LK-UNF DINSI 1.5P-2.0P HSS HSSE GLT-1

EMUGE BU51C400.5715 Tap 3/8-24.00TPI Bottoming LK-UNF DINSI 1.5P-2.0P HSS HSSE GLT-1

ISO: BU51C400.5715

$118.18
Picture of WIDIA/KENNAMETAL GT005008 M14-2.00MM Cut Spiral Point Plug 3.0P-5.5P HSSE-Powder Metal TiN

WIDIA/KENNAMETAL GT005008 M14-2.00MM Cut Spiral Point Plug 3.0P-5.5P HSSE-Powder Metal TiN

Call (262) 251-4020 for pricing
Picture of REGAL 015153AS 1/2-13.00TPI Cut Spiral Point Plug 4.0P-5.0P HSS Uncoated

REGAL 015153AS 1/2-13.00TPI Cut Spiral Point Plug 4.0P-5.0P HSS Uncoated

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT275020 1/2-20.00TPI Over Sized Roll Form Bottoming 1.0P-2.0P HSSE TiCN

WIDIA/KENNAMETAL GT275020 1/2-20.00TPI Over Sized Roll Form Bottoming 1.0P-2.0P HSSE TiCN

Call (262) 251-4020 for pricing
Picture of REGAL 008828AS 3/4-14.00TPI Pipe Spiral Flute Pipe HSS Uncoated

REGAL 008828AS 3/4-14.00TPI Pipe Spiral Flute Pipe HSS Uncoated

Call (262) 251-4020 for pricing
Picture of REGAL 008827AS 3/4-14.00TPI Pipe Spiral Flute Pipe HSS Uncoated

REGAL 008827AS 3/4-14.00TPI Pipe Spiral Flute Pipe HSS Uncoated

Call (262) 251-4020 for pricing
Picture of ISCAR ECI-H5R 375-940W02CF IC900 DIA 3/8 SH 0.3750 LOC 0.9400 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0200 0.51MM CHATTERFREE

ISCAR ECI-H5R 375-940W02CF IC900 DIA 3/8 SH 0.3750 LOC 0.9400 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0200 0.51MM CHATTERFREE

$118.09
Picture of ISCAR ICP 0740 IC908 .740" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0740 IC908 .740" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0740 IC908

$118.09
Picture of ISCAR ICP 0760 IC908 .760" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0760 IC908 .760" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0760 IC908

$118.09
Picture of ISCAR EPXI-F6 375-750C375F3. IC02 DIA 3/8 SH 0.3750 LOC 0.3260 OAL 3.00 End Mill Carbide Uncoated Single End Square SolidMill

ISCAR EPXI-F6 375-750C375F3. IC02 DIA 3/8 SH 0.3750 LOC 0.3260 OAL 3.00 End Mill Carbide Uncoated Single End Square SolidMill

$118.09
Picture of ISCAR ICP 0752 IC908 .752" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0752 IC908 .752" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0752 IC908

$118.09
Picture of ISCAR ICP 0717 IC908 .717" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0717 IC908 .717" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0717 IC908

$118.09
Picture of ISCAR ICP 0713 IC908 .713" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0713 IC908 .713" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0713 IC908

$118.09
Picture of ISCAR ICG 0709 IC908 .709" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISCAR ICG 0709 IC908 .709" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISO: ICG 0709 IC908

$118.09
Picture of ISCAR ICG 0669 IC908 .669" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISCAR ICG 0669 IC908 .669" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISO: ICG 0669 IC908

$118.09
Picture of ISCAR ICP 0748 IC908 .748" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0748 IC908 .748" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0748 IC908

$118.09
Picture of ISCAR ICP 0744 IC908 .744" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0744 IC908 .744" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0744 IC908

$118.09
Picture of ISCAR ECI-H5R 375-940C02CF IC900 DIA 3/8 SH 0.3750 LOC 0.9400 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0200 0.51MM CHATTERFREE

ISCAR ECI-H5R 375-940C02CF IC900 DIA 3/8 SH 0.3750 LOC 0.9400 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Corner Radius 0.0200 0.51MM CHATTERFREE

$118.09
Picture of ISCAR ICP 0720 IC908 .720" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0720 IC908 .720" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0720 IC908

$118.09
Picture of ISCAR ICP 0764 IC908 .764" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0764 IC908 .764" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0764 IC908

$118.09
Picture of ISCAR ICP 0732 IC908 .732" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0732 IC908 .732" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0732 IC908

$118.09
Picture of ISCAR ICP 0724 IC908 .724" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0724 IC908 .724" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0724 IC908

$118.09
Picture of ISCAR ICP 0780 IC908 .780" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0780 IC908 .780" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0780 IC908

$118.09
Picture of ISCAR ICG 0650 IC908 .650" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISCAR ICG 0650 IC908 .650" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISO: ICG 0650 IC908

$118.09
Picture of ISCAR ICP 0768 IC908 .768" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0768 IC908 .768" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0768 IC908

$118.09
Picture of ISCAR ICG 0697 IC908 .697" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISCAR ICG 0697 IC908 .697" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISO: ICG 0697 IC908

$118.09
Picture of ISCAR ICG 0642 IC908 .642" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISCAR ICG 0642 IC908 .642" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISO: ICG 0642 IC908

$118.09
Picture of ISCAR ICG 0689 IC908 .689" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISCAR ICG 0689 IC908 .689" Exchangeable Chip Splitting Drill Heads for Stainless and Alloyed Steel

ISO: ICG 0689 IC908

$118.09
Picture of ISCAR ICP 0756 IC908 .756" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0756 IC908 .756" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0756 IC908

$118.09
Picture of ISCAR ICP 0736 IC908 .736" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0736 IC908 .736" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0736 IC908

$118.09
Picture of ISCAR ICP 0776 IC908 .776" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0776 IC908 .776" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0776 IC908

$118.09
Picture of ISCAR ICP 0783 IC908 .783" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0783 IC908 .783" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0783 IC908

$118.09
Picture of ISCAR ICP 0750 IC908 .750" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0750 IC908 .750" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0750 IC908

$118.09
Picture of ISCAR ICP 0772 IC908 .772" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0772 IC908 .772" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0772 IC908

$118.09
Picture of ISCAR ICP 0728 IC908 .728" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0728 IC908 .728" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0728 IC908

$118.09
Picture of ISCAR ICP 0787 IC908 .787" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0787 IC908 .787" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0787 IC908

$118.09
Picture of ISCAR MM S-A-H10.5-ER16-T05 SH 0.6299 OAL 1.4960 Replacable Head Acc. ER 11 Steel Single End MULTI-MASTER

ISCAR MM S-A-H10.5-ER16-T05 SH 0.6299 OAL 1.4960 Replacable Head Acc. ER 11 Steel Single End MULTI-MASTER

$118.08
Picture of ISCAR MM S-A-H10.5-ER11-T05 SH 0.4331 OAL 1.1220 Replacable Head Acc. ER 16 Steel Single End MULTI-MASTER

ISCAR MM S-A-H10.5-ER11-T05 SH 0.4331 OAL 1.1220 Replacable Head Acc. ER 16 Steel Single End MULTI-MASTER

$118.08
Picture of GORILLA MILL GMKD12CS4 DIA 1/2" SH 0.50 LOC 0.6250 OAL 2.50 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

GORILLA MILL GMKD12CS4 DIA 1/2" SH 0.50 LOC 0.6250 OAL 2.50 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

ISO: GMKD12CS4

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMKD12CS5 DIA 1/2" SH 0.50 LOC 0.6250 OAL 2.50 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

GORILLA MILL GMKD12CS5 DIA 1/2" SH 0.50 LOC 0.6250 OAL 2.50 End Mill Carbide TiAlN Single End 45.0° Chamfer KNUCKLE DRAGGER

ISO: GMKD12CS5

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMAKD12CS3ZrN DIA 1/2" SH 0.50 LOC 0.6250 OAL 2.50 End Mill Carbide ZrN Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

GORILLA MILL GMAKD12CS3ZrN DIA 1/2" SH 0.50 LOC 0.6250 OAL 2.50 End Mill Carbide ZrN Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

ISO: GMAKD12CS3ZrN

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMAKD12CS3 DIA 1/2" SH 0.50 LOC 0.6250 OAL 2.50 End Mill Carbide Uncoated Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

GORILLA MILL GMAKD12CS3 DIA 1/2" SH 0.50 LOC 0.6250 OAL 2.50 End Mill Carbide Uncoated Single End 45.0° Chamfer SILVERBack KNUCKLE DRAGGER

ISO: GMAKD12CS3

Call (262) 251-4020 for pricing
Picture of VIKING 16702 7/8" Annular Drill 2 Length Of Cut Gold Coated

VIKING 16702 7/8" Annular Drill 2 Length Of Cut Gold Coated

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1401374 M6-1.00MM Cut Spiral Point Plug 2.0P-3.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401374 M6-1.00MM Cut Spiral Point Plug 2.0P-3.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of AWARD M-212-COTIN DIA 1/8 SH 0.50 LOC 3.00 OAL 5.00 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD M-212-COTIN DIA 1/8 SH 0.50 LOC 3.00 OAL 5.00 End Mill Taper Flute Cobalt TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of YG-1 GYG68906 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal TiAlN Single End Square Sharp Only One

YG-1 GYG68906 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal TiAlN Single End Square Sharp Only One

$117.94
Picture of TUNGALOY VED120L09.0R10-04S08 AH725 DIA 12MM SH T08 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM TUNG MEISTER

TUNGALOY VED120L09.0R10-04S08 AH725 DIA 12MM SH T08 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE120L09.0R10-04S08 AH725 DIA 12MM SH T05 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM TUNG MEISTER

TUNGALOY VEE120L09.0R10-04S08 AH725 DIA 12MM SH T05 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE120L09.0R00-04S08 AH725 DIA 12MM SH T05 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Square TUNG MEISTER

TUNGALOY VEE120L09.0R00-04S08 AH725 DIA 12MM SH T05 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Square TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VED120L09.0R05-04S08 AH725 DIA 12MM SH T12 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM TUNG MEISTER

TUNGALOY VED120L09.0R05-04S08 AH725 DIA 12MM SH T12 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE120L09.0R05-04S08 AH725 DIA 12MM SH T10 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM TUNG MEISTER

TUNGALOY VEE120L09.0R05-04S08 AH725 DIA 12MM SH T10 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute High Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of MICRO 100 TM-500* Thread Mill 11.00TPI-32.00TPI UN

MICRO 100 TM-500* Thread Mill 11.00TPI-32.00TPI UN

Call (262) 251-4020 for pricing
Picture of TUNGALOY VRD100L05.0R30-06S06 AH725 DIA 10MM SH T06 LOC 0.1969 OAL 0.5118End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1181 3.00MM TUNG MEISTER

TUNGALOY VRD100L05.0R30-06S06 AH725 DIA 10MM SH T06 LOC 0.1969 OAL 0.5118End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.1181 3.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of YG-1 EM833100 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Roughing Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

YG-1 EM833100 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Roughing Flute Standard Helix Carbide TiAlN Single End Ball Nose X-Power

$117.90
Picture of IMCO 63426 DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0200 0.51MM Pow-R-Feed Mill

IMCO 63426 DIA 3/8 SH 0.3750 LOC 1.7500 OAL 4.00 End Mill Standard Flute Variable Helix Carbide AlTiN Single End Corner Radius 0.0200 0.51MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of YG-1 60445CN DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt TiN Single End Square Sharp General Purpose

YG-1 60445CN DIA 1-1/4 SH 1.2500 LOC 2.00 OAL 4.50 End Mill Cobalt TiN Single End Square Sharp General Purpose

$117.83
Picture of YG-1 60439CN DIA 1-1/4 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Cobalt TiN Single End Square Sharp General Purpose

YG-1 60439CN DIA 1-1/4 SH 0.7500 LOC 2.00 OAL 4.2500 End Mill Cobalt TiN Single End Square Sharp General Purpose

$117.83
Picture of TUNGALOY TEB018A2-027/16C4M50 AH750 DIA 1.80MM SH 0.1575 LOC 0.1063 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

TUNGALOY TEB018A2-027/16C4M50 AH750 DIA 1.80MM SH 0.1575 LOC 0.1063 OAL 1.968 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Ball Nose TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEC060B6-26C06-70 AH750 DIA 6MM SH 0.2362 LOC 1.0236 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp TUNG MEISTER

TUNGALOY TEC060B6-26C06-70 AH750 DIA 6MM SH 0.2362 LOC 1.0236 OAL 2.7559 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECA060H3-12/30C06CF-R02C KS15F DIA 6MM SH 0.2362 LOC 0.4724 OAL 2.5591 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

TUNGALOY TECA060H3-12/30C06CF-R02C KS15F DIA 6MM SH 0.2362 LOC 0.4724 OAL 2.5591 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEC100B4-22C10R05-72 AH725 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM TUNG MEISTER

TUNGALOY TEC100B4-22C10R05-72 AH725 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0197 0.50MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECA120B3-25C12-83 KS15F DIA 12MM SH 0.4724 LOC 0.9843 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

TUNGALOY TECA120B3-25C12-83 KS15F DIA 12MM SH 0.4724 LOC 0.9843 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECA120B2-25C12-83 KS15F DIA 12MM SH 0.4724 LOC 0.9843 OAL 3.2677 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square TUNG MEISTER

TUNGALOY TECA120B2-25C12-83 KS15F DIA 12MM SH 0.4724 LOC 0.9843 OAL 3.2677 End Mill Standard Flute Standard Helix Carbide Uncoated Single End Square TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECA120B3-25W12-83 KS15F DIA 12MM SH 0.4724 LOC 0.9843 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

TUNGALOY TECA120B3-25W12-83 KS15F DIA 12MM SH 0.4724 LOC 0.9843 OAL 3.2677 End Mill Standard Flute Variable Helix Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEC100B4-22C10R2-72 AH725 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0787 2.00MM TUNG MEISTER

TUNGALOY TEC100B4-22C10R2-72 AH725 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0787 2.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEC100B4-22C10R1-72 AH725 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM TUNG MEISTER

TUNGALOY TEC100B4-22C10R1-72 AH725 DIA 10MM SH 0.3937 LOC 0.8661 OAL 2.8346 End Mill Standard Flute Variable Helix Carbide TiAlN Single End Corner Radius 0.0394 1.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of AWARD R-513-CO DIA 5/16 SH 1.00 LOC 3.2500 OAL 5.7500 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD R-513-CO DIA 5/16 SH 1.00 LOC 3.2500 OAL 5.7500 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of YG-1 79529PF DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Powder Metal TiAlN Single End Square Sharp ASP

YG-1 79529PF DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Powder Metal TiAlN Single End Square Sharp ASP

$117.82
Picture of YG-1 77529PF DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Powder Metal TiAlN Single End Square Sharp ASP

YG-1 77529PF DIA 7/8 SH 0.8750 LOC 1.8750 OAL 4.1250 End Mill Powder Metal TiAlN Single End Square Sharp ASP

$117.82
Picture of WIDIN HPI508051 5.10MM DIA 140° Point 2 Flute 8XD Drill

WIDIN HPI508051 5.10MM DIA 140° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of AWARD O-310A-CO DIA 3/16 SH 0.50 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD O-310A-CO DIA 3/16 SH 0.50 LOC 2.50 OAL 4.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 4V0516006NW DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide AlTiN Single End 45.0° Chamfer VariMill I

HANITA/WIDIA 4V0516006NW DIA 5/8 SH 0.6250 LOC 1.2500 OAL 3.50 End Mill Standard Flute High Helix Carbide AlTiN Single End 45.0° Chamfer VariMill I

Call (262) 251-4020 for pricing
Picture of IMCO 67190 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

IMCO 67190 DIA 7/16 SH 0.4375 LOC 1.00 OAL 2.7500 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of AWARD X-504-COTIN DIA 5/16 SH 0.7500 LOC 1.00 OAL 3.3750 End Mill Taper Flute Cobalt TiN Single End Square Sharp

AWARD X-504-COTIN DIA 5/16 SH 0.7500 LOC 1.00 OAL 3.3750 End Mill Taper Flute Cobalt TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD O-320 DIA 3/16 SH 1.00 LOC 5.00 OAL 7.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD O-320 DIA 3/16 SH 1.00 LOC 5.00 OAL 7.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC10-24UN3FL2X Carbide Thread Mill Helical #10 24.00TPI UN TIALN 0.3960 10.06MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC10-24UN3FL2X Carbide Thread Mill Helical #10 24.00TPI UN TIALN 0.3960 10.06MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC10-24UN3FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0300MM-0.503FL2X Carbide Thread Mill Helical M3 0.50MM Metric TIALN 0.2460 6.25MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC0300MM-0.503FL2X Carbide Thread Mill Helical M3 0.50MM Metric TIALN 0.2460 6.25MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC0300MM-0.503FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC10-32UN3FL2X Carbide Thread Mill Helical #10 32.00TPI UN TIALN 0.3910 9.93MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC10-32UN3FL2X Carbide Thread Mill Helical #10 32.00TPI UN TIALN 0.3910 9.93MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC10-32UN3FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0500MM-0.803FL1.5X Carbide Thread Mill Helical M5 0.80MM Metric TIALN 0.2990 7.59MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC0500MM-0.803FL1.5X Carbide Thread Mill Helical M5 0.80MM Metric TIALN 0.2990 7.59MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC0500MM-0.803FL1.5X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0500MM-0.803FL2X Carbide Thread Mill Helical M5 0.80MM Metric TIALN 0.4250 10.80MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC0500MM-0.803FL2X Carbide Thread Mill Helical M5 0.80MM Metric TIALN 0.4250 10.80MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC0500MM-0.803FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0400MM-0.503FL2X Carbide Thread Mill Helical M4 0.50MM Metric TIALN 0.3250 8.26MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC0400MM-0.503FL2X Carbide Thread Mill Helical M4 0.50MM Metric TIALN 0.3250 8.26MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC0400MM-0.503FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC10-24UN3FL1.5X Carbide Thread Mill Helical #10 24.00TPI UN TIALN 0.3120 7.92MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC10-24UN3FL1.5X Carbide Thread Mill Helical #10 24.00TPI UN TIALN 0.3120 7.92MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC10-24UN3FL1.5X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0300MM-0.503FL1.5X Carbide Thread Mill Helical M3 0.50MM Metric TIALN 0.1870 4.75MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC0300MM-0.503FL1.5X Carbide Thread Mill Helical M3 0.50MM Metric TIALN 0.1870 4.75MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC0300MM-0.503FL1.5X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0400MM-0.703FL1.5X Carbide Thread Mill Helical M4 0.70MM Metric TIALN 0.2620 6.65MM LOC 1.7717 45.00MM OAL

GORILLA MILL GMTMAC0400MM-0.703FL1.5X Carbide Thread Mill Helical M4 0.70MM Metric TIALN 0.2620 6.65MM LOC 1.7717 45.00MM OAL

ISO: GMTMAC0400MM-0.703FL1.5X

Call (262) 251-4020 for pricing
Picture of YG-1 0311ATF 31/64 Carbide Dream Drill W/O Coolant Holes (3XD)

YG-1 0311ATF 31/64 Carbide Dream Drill W/O Coolant Holes (3XD)

$117.57
Picture of AWARD O-254-CB DIA 5/32 SH 0.3750 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD O-254-CB DIA 5/32 SH 0.3750 LOC 1.00 OAL 3.00 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of AWARD O-416TIN DIA 1/4 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

AWARD O-416TIN DIA 1/4 SH 0.7500 LOC 4.00 OAL 6.2500 End Mill Taper Flute HSS TiN Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of EMUGE 3446L.06015A DIA 3MM SH 0.2362 LOC 0.5906 OAL 2.4409 End Mill Taper Flute Carbide AlCrN Single End Ball Nose Turbine Program

EMUGE 3446L.06015A DIA 3MM SH 0.2362 LOC 0.5906 OAL 2.4409 End Mill Taper Flute Carbide AlCrN Single End Ball Nose Turbine Program

$117.47
Picture of AWARD BM-154TIN DIA 7/64 SH 0.3750 LOC 1.00 OAL 2.8750 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BM-154TIN DIA 7/64 SH 0.3750 LOC 1.00 OAL 2.8750 End Mill Taper Flute HSS TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of AWARD L-809A-CO DIA 1/2 SH 0.50 LOC 2.2500 OAL 4.3750 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD L-809A-CO DIA 1/2 SH 0.50 LOC 2.2500 OAL 4.3750 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of IMCO 63685 DIA 10MM SH 0.3937 LOC 0.9843 OAL 2.8346 End Mill Carbide AlCrN Single End Square Sharp Pow-R-Path Mill

IMCO 63685 DIA 10MM SH 0.3937 LOC 0.9843 OAL 2.8346 End Mill Carbide AlCrN Single End Square Sharp Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP128 AH725 0.5039" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP128 AH725 0.5039" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP128 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP142 AH9130 0.5591" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP142 AH9130 0.5591" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP142 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP127 AH725 1/2" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP127 AH725 1/2" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP127 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP138 AH725 0.5433" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP138 AH725 0.5433" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP138 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP126 AH9130 0.4961" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP126 AH9130 0.4961" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP126 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP135 AH9130 0.5315" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP135 AH9130 0.5315" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP135 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP133 AH9130 0.5236" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP133 AH9130 0.5236" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP133 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP132 AH725 0.5197" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP132 AH725 0.5197" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP132 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP137 AH725 0.5394" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP137 AH725 0.5394" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP137 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP122 AH725 0.4803" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP122 AH725 0.4803" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP122 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP140 AH725 0.5512" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP140 AH725 0.5512" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP140 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP143 AH9130 0.563" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP143 AH9130 0.563" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP143 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP149 AH725 0.5866" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP149 AH725 0.5866" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP149 AH725

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMP139 AH9130 0.5472" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

TUNGALOY DMP139 AH9130 0.5472" Drill Meister DMP Drill heads for indexable head Drill s. General purpose type.

ISO: DMP139 AH9130

Call (262) 251-4020 for pricing