Agricultural

Sort by
Picture of ISCAR ICK 1016 IC908 1.016" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 1016 IC908 1.016" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 1016 IC908

$152.97
Picture of ISCAR ICK 0831-2M IC908 .831" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0831-2M IC908 .831" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0831-2M IC908

$152.97
Picture of ISCAR ICK 0945 IC908 .945" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0945 IC908 .945" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0945 IC908

$152.97
Picture of ISCAR ICK 0866-2M IC908 .866" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0866-2M IC908 .866" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0866-2M IC908

$152.97
Picture of ISCAR ICK 0795-2M IC908 .795" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0795-2M IC908 .795" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0795-2M IC908

$152.97
Picture of ISCAR ICK 0984 IC908 .984" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0984 IC908 .984" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0984 IC908

$152.97
Picture of ISCAR ICK 0835-2M IC908 .835" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0835-2M IC908 .835" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0835-2M IC908

$152.97
Picture of ISCAR ICK 1004 IC908 1.004" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 1004 IC908 1.004" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 1004 IC908

$152.97
Picture of ISCAR ICK 0843-2M IC908 .843" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0843-2M IC908 .843" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0843-2M IC908

$152.97
Picture of ISCAR ICK 0984 IC907 .984" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0984 IC907 .984" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0984 IC907

$152.97
Picture of ISCAR ICK 0980 IC908 .980" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISCAR ICK 0980 IC908 .980" Exchangeable DCN Drill Heads, for Cast Iron (ISO K Materials)

ISO: ICK 0980 IC908

$152.97
Picture of ISCAR ICK 0850-2M IC908 .850" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISCAR ICK 0850-2M IC908 .850" Double Margin Drill ing Heads for DCN Drill s for Machining Cast Iron with High Surface Finish Results

ISO: ICK 0850-2M IC908

$152.97
Picture of ISCAR EFSI-B44 500-1.0W500R09 IC300 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide TiCN Single End 45.0° Chamfer FINI-SHRED

ISCAR EFSI-B44 500-1.0W500R09 IC300 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide TiCN Single End 45.0° Chamfer FINI-SHRED

$152.94
Picture of YG-1 O1705 3/4-10.00TPI Cut Spiral Point Plug 4P-5P Super HSS Hardslick

YG-1 O1705 3/4-10.00TPI Cut Spiral Point Plug 4P-5P Super HSS Hardslick

Call (262) 251-4020 for pricing
Picture of YG-1 O1723 3/4-16.00TPI Cut Spiral Point Plug 4P-5P Super HSS Hardslick

YG-1 O1723 3/4-16.00TPI Cut Spiral Point Plug 4P-5P Super HSS Hardslick

Call (262) 251-4020 for pricing
Picture of YG-1 O1703 3/4-10.00TPI Cut Spiral Point Plug 4P-5P Super HSS Hardslick

YG-1 O1703 3/4-10.00TPI Cut Spiral Point Plug 4P-5P Super HSS Hardslick

Call (262) 251-4020 for pricing
Picture of YG-1 O1725 3/4-16.00TPI Cut Spiral Point Plug 4P-5P Super HSS Hardslick

YG-1 O1725 3/4-16.00TPI Cut Spiral Point Plug 4P-5P Super HSS Hardslick

Call (262) 251-4020 for pricing
Picture of INGERSOLL S012T08DA012 SH 0.4724 OAL 3.5433Replacable Head Acc. Straight Steel Single End CHIPSURFER

INGERSOLL S012T08DA012 SH 0.4724 OAL 3.5433Replacable Head Acc. Straight Steel Single End CHIPSURFER

$152.88
Picture of INGERSOLL S012T08DA015 SH 0.4724 OAL 3.5433Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End CHIPSURFER

INGERSOLL S012T08DA015 SH 0.4724 OAL 3.5433Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End CHIPSURFER

$152.88
Picture of INGERSOLL ER20T10SA-02 0.6 Screw ON ER STEEL T10 Replacable Head Acc. ER 20 Steel Single End CHIPSURFER

INGERSOLL ER20T10SA-02 0.6 Screw ON ER STEEL T10 Replacable Head Acc. ER 20 Steel Single End CHIPSURFER

$152.88
Picture of TUNGALOY VEE120L09.0C50I04S08 AH725 DIA 12MM SH T12 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY VEE120L09.0C50I04S08 AH725 DIA 12MM SH T12 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TEC090A4-19C10-72 AH750 DIA 9MM SH 0.3937 LOC 0.7480 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp TUNG MEISTER

TUNGALOY TEC090A4-19C10-72 AH750 DIA 9MM SH 0.3937 LOC 0.7480 OAL 2.8346 End Mill Standard Flute Standard Helix Carbide TiAlN Single End Square Sharp TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of AWARD BV-807TIN DIA 1/2 SH 1.00 LOC 1.7500 OAL 4.2500 End Mill Taper Flute HSS TiN Single End Ball Nose

AWARD BV-807TIN DIA 1/2 SH 1.00 LOC 1.7500 OAL 4.2500 End Mill Taper Flute HSS TiN Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of YG-1 75529PE DIA 7/8 SH 0.8750 LOC 0.8750 OAL 3.1250 End Mill Powder Metal TiAlN Single End Square Sharp ASP

YG-1 75529PE DIA 7/8 SH 0.8750 LOC 0.8750 OAL 3.1250 End Mill Powder Metal TiAlN Single End Square Sharp ASP

Call (262) 251-4020 for pricing
Picture of YG-1 75529PH DIA 7/8 SH 0.8750 LOC 0.8750 OAL 3.1250 End Mill Powder Metal Hardslick Single End Square Sharp ASP

YG-1 75529PH DIA 7/8 SH 0.8750 LOC 0.8750 OAL 3.1250 End Mill Powder Metal Hardslick Single End Square Sharp ASP

Call (262) 251-4020 for pricing
Picture of ISCAR MM S-A-L3.5/.63C50T08- CH SH 0.50 OAL 3.50 Replacable Head Acc. Stepped Shank Carbide Single End MULTI-MASTER

ISCAR MM S-A-L3.5/.63C50T08- CH SH 0.50 OAL 3.50 Replacable Head Acc. Stepped Shank Carbide Single End MULTI-MASTER

$152.64
Picture of ISCAR MM S-A-H004-ER25-T08 SH 0.9843 OAL 1.4960 Replacable Head Acc. ER 25 Steel Single End MULTI-MASTER

ISCAR MM S-A-H004-ER25-T08 SH 0.9843 OAL 1.4960 Replacable Head Acc. ER 25 Steel Single End MULTI-MASTER

$152.64
Picture of ISCAR MM S-A-L3.5-C1.0T08 SH 1.00 OAL 3.50 Replacable Head Acc. Straight Shank Steel Single End MULTI-MASTER

ISCAR MM S-A-L3.5-C1.0T08 SH 1.00 OAL 3.50 Replacable Head Acc. Straight Shank Steel Single End MULTI-MASTER

$152.64
Picture of AWARD K-403-CB DIA 1/4 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

AWARD K-403-CB DIA 1/4 SH 0.3750 LOC 0.7500 OAL 2.50 End Mill Taper Flute Carbide Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of YG-1 95076 DIA 5/8 SH 0.6250 LOC 0.8750 OAL 3.2500 End Mill Carbide TiAlN Single End Square Sharp J-Power

YG-1 95076 DIA 5/8 SH 0.6250 LOC 0.8750 OAL 3.2500 End Mill Carbide TiAlN Single End Square Sharp J-Power

Call (262) 251-4020 for pricing
Picture of AWARD BO-824 DIA 1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BO-824 DIA 1/2 SH 1.2500 LOC 6.00 OAL 8.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of WIDIN HPI508070 7.00MM DIA 140° Point 2 Flute 8XD Drill

WIDIN HPI508070 7.00MM DIA 140° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of WIDIN HPI508075 7.50MM DIA 140° Point 2 Flute 8XD Drill

WIDIN HPI508075 7.50MM DIA 140° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of WIDIN HPI50807541 7.541MM DIA 140° Point 2 Flute 8XD Drill

WIDIN HPI50807541 7.541MM DIA 140° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of WIDIN HPI50807938 7.938MM DIA 140° Point 2 Flute 8XD Drill

WIDIN HPI50807938 7.938MM DIA 140° Point 2 Flute 8XD Drill

Call (262) 251-4020 for pricing
Picture of IMCO 63517 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

IMCO 63517 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT045010 M18-2.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiAIN + TiN

WIDIA/KENNAMETAL GT045010 M18-2.50MM Cut Spiral Flute Mod Bottom 2.0P-3.0P HSSE-Powder Metal TiAIN + TiN

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1394441 M18-1.50MM Cut Spiral Point Plug 3.5P-5.0P HSSE-Powder Metal TiCN +

LMT FETTE 1394441 M18-1.50MM Cut Spiral Point Plug 3.5P-5.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE050L37C016RU04S08 AH725 DIA 1/2 SH T06 LOC 0.3700 OAL 0.6500End Mill,Replacable Head Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY VEE050L37C016RU04S08 AH725 DIA 1/2 SH T06 LOC 0.3700 OAL 0.6500End Mill,Replacable Head Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of ISCAR EFSI-B44 500-1.0W500R12 IC300 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide TiCN Single End 45.0° Chamfer FINI-SHRED

ISCAR EFSI-B44 500-1.0W500R12 IC300 DIA 1/2 SH 0.50 LOC 1.00 OAL 3.00 End Mill Carbide TiCN Single End 45.0° Chamfer FINI-SHRED

$152.35
Picture of EMUGE CU51C400.5665 Tap 7/16-14.00TPI Bottoming LK-UNC DINSI 1.5P-2.0P Cobalt HSSE GLT-1

EMUGE CU51C400.5665 Tap 7/16-14.00TPI Bottoming LK-UNC DINSI 1.5P-2.0P Cobalt HSSE GLT-1

ISO: CU51C400.5665

Call (262) 251-4020 for pricing
Picture of IMCO 67769 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Feed Mill

IMCO 67769 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0600 1.52MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of IMCO 67768 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

IMCO 67768 DIA 1/2 SH 0.50 LOC 0.6250 OAL 3.00 End Mill Standard Flute Variable Helix Carbide AlCrN Single End Corner Radius 0.0300 0.76MM Pow-R-Feed Mill

Call (262) 251-4020 for pricing
Picture of WIDIA/KENNAMETAL GT425012 M20-2.50MM Cut Spiral Flute Mod Bottom 2.5P-3.0P HSSE-Powder Metal TiCN

WIDIA/KENNAMETAL GT425012 M20-2.50MM Cut Spiral Flute Mod Bottom 2.5P-3.0P HSSE-Powder Metal TiCN

Call (262) 251-4020 for pricing
Picture of ISCAR MM EC375H56R015-7T06 IC908 DIA 3/8 SH T06 LOC 0.5630 OAL 0.8660Screw On Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0150 0.38MM MULTI-MASTER

ISCAR MM EC375H56R015-7T06 IC908 DIA 3/8 SH T06 LOC 0.5630 OAL 0.8660Screw On Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0150 0.38MM MULTI-MASTER

$152.11
Picture of ISCAR MM EA160H16R0CF-4T10 IC08 DIA 16MM SH T10 LOC 0.6300 OAL 1.4860End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp MULTI-MASTER

ISCAR MM EA160H16R0CF-4T10 IC08 DIA 16MM SH T10 LOC 0.6300 OAL 1.4860End Mill,Replacable Head Standard Flute Standard Helix Carbide Uncoated Single End Square Sharp MULTI-MASTER

$152.11
Picture of ISCAR ECAI-B-3 625-1.0-C625 IC08 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0080 0.20MM SolidMill

ISCAR ECAI-B-3 625-1.0-C625 IC08 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0080 0.20MM SolidMill

$152.11
Picture of ISCAR ECAI-B-2 625-1.0-C625 IC08 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp SolidMill

ISCAR ECAI-B-2 625-1.0-C625 IC08 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute High Helix Carbide Uncoated Single End Square Sharp SolidMill

$152.11
Picture of ISCAR ECPI-H7 375-1.5C375CF-4 IC902 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End 45.0° Chamfer CHATTERFREE

ISCAR ECPI-H7 375-1.5C375CF-4 IC902 DIA 3/8 SH 0.3750 LOC 1.50 OAL 4.00 End Mill Carbide TiAlN Single End 45.0° Chamfer CHATTERFREE

$152.11
Picture of EMUGE C1069401.0276 Tap Mod Bottom M10-1.00MM 6H Metric DIN/DIN Coolant HSSE TiCN

EMUGE C1069401.0276 Tap Mod Bottom M10-1.00MM 6H Metric DIN/DIN Coolant HSSE TiCN

ISO: C1069401.0276

Call (262) 251-4020 for pricing
Picture of AWARD BL-1209 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BL-1209 DIA 3/4 SH 0.7500 LOC 2.2500 OAL 4.50 End Mill Taper Flute HSS Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of WIDIN ZF604110 DIA 11MM SH 0.4724 LOC 1.0236 OAL 2.9528 End Mill Carbide AlTiN Single End Square Sharp Z-CLASSIC

WIDIN ZF604110 DIA 11MM SH 0.4724 LOC 1.0236 OAL 2.9528 End Mill Carbide AlTiN Single End Square Sharp Z-CLASSIC

Call (262) 251-4020 for pricing
Picture of WIDIN ZF604120 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9528 End Mill Carbide AlTiN Single End Square Sharp Z-CLASSIC

WIDIN ZF604120 DIA 12MM SH 0.4724 LOC 1.0236 OAL 2.9528 End Mill Carbide AlTiN Single End Square Sharp Z-CLASSIC

Call (262) 251-4020 for pricing
Picture of WIDIN ZF614120 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Carbide AlTiN Single End Square Sharp Z-CLASSIC

WIDIN ZF614120 DIA 12MM SH 0.4724 LOC 1.0236 OAL 3.2677 End Mill Carbide AlTiN Single End Square Sharp Z-CLASSIC

Call (262) 251-4020 for pricing
Picture of YG-1 N4705 3/4-10.00TPI Cut Spiral Point Plug 4P-5P Super HSS Steam Oxide

YG-1 N4705 3/4-10.00TPI Cut Spiral Point Plug 4P-5P Super HSS Steam Oxide

Call (262) 251-4020 for pricing
Picture of YG-1 N4725 3/4-16.00TPI Cut Spiral Point Plug 4P-5P Super HSS Steam Oxide

YG-1 N4725 3/4-16.00TPI Cut Spiral Point Plug 4P-5P Super HSS Steam Oxide

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC164 AH9130 0.6457" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC164 AH9130 0.6457" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC164 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC172 AH9130 0.6772" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC172 AH9130 0.6772" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC172 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC165 AH9130 0.6496" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC165 AH9130 0.6496" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC165 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC167 AH9130 0.6575" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC167 AH9130 0.6575" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC167 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC173 AH9130 0.6811" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC173 AH9130 0.6811" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC173 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC176 AH9130 0.6929" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC176 AH9130 0.6929" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC176 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC163 AH9130 0.6417" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC163 AH9130 0.6417" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC163 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC174 AH9130 0.685" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC174 AH9130 0.685" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC174 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC169 AH9130 0.6654" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC169 AH9130 0.6654" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC169 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC166 AH9130 0.6535" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC166 AH9130 0.6535" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC166 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC161 AH9130 0.6339" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC161 AH9130 0.6339" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC161 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC171 AH9130 0.6732" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC171 AH9130 0.6732" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC171 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC162 AH9130 0.6378" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC162 AH9130 0.6378" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC162 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC179 AH9130 0.7047" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC179 AH9130 0.7047" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC179 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC170 AH9130 0.6693" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC170 AH9130 0.6693" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC170 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC168 AH9130 0.6614" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC168 AH9130 0.6614" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC168 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC175 AH9130 0.689" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC175 AH9130 0.689" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC175 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC177 AH9130 0.6968" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC177 AH9130 0.6968" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC177 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC178 AH9130 0.7008" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC178 AH9130 0.7008" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC178 AH9130

Call (262) 251-4020 for pricing
Picture of TUNGALOY DMC180 AH9130 0.7087" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

TUNGALOY DMC180 AH9130 0.7087" Drill Meister DMC Drill heads for indexable head Drill s for high accuracy Drill ing

ISO: DMC180 AH9130

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 577716016MT DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.6220 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp VariMill II

HANITA/WIDIA 577716016MT DIA 16MM SH 0.6299 LOC 1.2598 OAL 3.6220 End Mill Standard Flute High Helix Carbide AlTiN Single End Square Sharp VariMill II

Call (262) 251-4020 for pricing
Picture of YG-1 93274 DIA 5/8 SH 0.6250 LOC 0.8750 OAL 3.2500 End Mill Carbide TiAlN Single End 45.0° Chamfer Sharp X-Power

YG-1 93274 DIA 5/8 SH 0.6250 LOC 0.8750 OAL 3.2500 End Mill Carbide TiAlN Single End 45.0° Chamfer Sharp X-Power

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE120L09.0C35R04S08 AH725 DIA 12MM SH T05 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY VEE120L09.0C35R04S08 AH725 DIA 12MM SH T05 LOC 0.3543 OAL 0.6496End Mill,Replacable Head Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VSS062L400S10US DIA 0.598 SH 0.6250 LOC 0.7850 OAL 4.00 Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End TUNG MEISTER

TUNGALOY VSS062L400S10US DIA 0.598 SH 0.6250 LOC 0.7850 OAL 4.00 Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VST062L400S10US DIA 5/8 SH 0.6250 LOC 4.00 OAL 4.00 Replacable Head Acc. Straight Shank/Slotting Heads Steel Single End TUNG MEISTER

TUNGALOY VST062L400S10US DIA 5/8 SH 0.6250 LOC 4.00 OAL 4.00 Replacable Head Acc. Straight Shank/Slotting Heads Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of INGERSOLL 47D-7562TSRD03 IN2005 DIA 3/4 SH T12 LOC 0.7500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM CHIPSURFER

INGERSOLL 47D-7562TSRD03 IN2005 DIA 3/4 SH T12 LOC 0.7500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0310 0.79MM CHIPSURFER

$151.59
Picture of INGERSOLL 47D-7562TSRB06 IN2005 DIA 3/4 SH T12 LOC 0.7500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0630 1.60MM CHIPSURFER

INGERSOLL 47D-7562TSRB06 IN2005 DIA 3/4 SH T12 LOC 0.7500End Mill,Replacable Head Standard Flute Standard Helix Carbide TiAlN Single End Corner Radius 0.0630 1.60MM CHIPSURFER

$151.59
Picture of EMUGE C010R501.0112 Tap Mod Bottom M12-1.75MM 6H Metric DIN/DIN HSSE-Powder Metal TiCN

EMUGE C010R501.0112 Tap Mod Bottom M12-1.75MM 6H Metric DIN/DIN HSSE-Powder Metal TiCN

ISO: C010R501.0112

Call (262) 251-4020 for pricing
Picture of YMW 382927B 3/4-10.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Uncoated

YMW 382927B 3/4-10.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Uncoated

Call (262) 251-4020 for pricing
Picture of YMW 382927 3/4-10.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V TiN

YMW 382927 3/4-10.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V TiN

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1393809 M18-2.50MM Cut Spiral Point Plug 3.5P-5.0P HSSE-Powder Metal TiCN +

LMT FETTE 1393809 M18-2.50MM Cut Spiral Point Plug 3.5P-5.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of YG-1 EM832140 DIA 14MM SH 0.5512 LOC 0.7087 OAL 2.9528 End Mill Carbide TiAlN Single End Square Sharp X-Power

YG-1 EM832140 DIA 14MM SH 0.5512 LOC 0.7087 OAL 2.9528 End Mill Carbide TiAlN Single End Square Sharp X-Power

Call (262) 251-4020 for pricing
Picture of ISCAR ECI-A-2 625-1.0-W625 IC900 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp SolidMill

ISCAR ECI-A-2 625-1.0-W625 IC900 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp SolidMill

$151.34
Picture of ISCAR ICP 0976 IC908 .976" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0976 IC908 .976" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0976 IC908

$151.34
Picture of ISCAR MM ECF120-03/160-6T10 IC908 DIA 3MM SH T10 LOC 0.1460 OAL 1.2700 Countersink,Replacable Head Carbide TiAlN Single End Countersink MULTI-MASTER

ISCAR MM ECF120-03/160-6T10 IC908 DIA 3MM SH T10 LOC 0.1460 OAL 1.2700 Countersink,Replacable Head Carbide TiAlN Single End Countersink MULTI-MASTER

$151.34
Picture of ISCAR H3P 0787-IQ IC908 .787" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0787-IQ IC908 .787" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0787-IQ IC908

$151.34
Picture of ISCAR H3P 0732-IQ IC908 .732" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0732-IQ IC908 .732" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0732-IQ IC908

$151.34
Picture of ISCAR H3P 0720-IQ IC908 .720" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0720-IQ IC908 .720" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0720-IQ IC908

$151.34
Picture of ISCAR H3P 0750-IQ IC908 .750" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0750-IQ IC908 .750" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0750-IQ IC908

$151.34
Picture of ISCAR H3P 0783-IQ IC908 .783" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0783-IQ IC908 .783" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0783-IQ IC908

$151.34
Picture of ISCAR ICP 0984 IC908 .984" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0984 IC908 .984" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0984 IC908

$151.34
Picture of ISCAR ECI-E-4 625-1.0-W625 IC900 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp SolidMill

ISCAR ECI-E-4 625-1.0-W625 IC900 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp SolidMill

$151.34
Picture of ISCAR ICP 0996 IC908 .996" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0996 IC908 .996" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0996 IC908

$151.34
Picture of ISCAR ICP 0945 IC908 .945" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0945 IC908 .945" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0945 IC908

$151.34
Picture of ISCAR H3P 0756-IQ IC908 .756" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0756-IQ IC908 .756" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0756-IQ IC908

$151.34
Picture of ISCAR H3P 0740-IQ IC908 .740" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0740-IQ IC908 .740" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0740-IQ IC908

$151.34
Picture of ISCAR H3P 0780-IQ IC908 .780" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0780-IQ IC908 .780" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0780-IQ IC908

$151.34
Picture of ISCAR ICP 0965 IC908 .965" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0965 IC908 .965" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0965 IC908

$151.34
Picture of ISCAR H3P 0736-IQ IC908 .736" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0736-IQ IC908 .736" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0736-IQ IC908

$151.34
Picture of ISCAR ECI-E-3 625-1.0-C625 IC900 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp SolidMill

ISCAR ECI-E-3 625-1.0-C625 IC900 DIA 5/8 SH 0.6250 LOC 1.00 OAL 3.50 End Mill Standard Flute Standard Helix Carbide AlTiN Single End Square Sharp SolidMill

$151.34
Picture of ISCAR H3P 0724-IQ IC908 .724" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0724-IQ IC908 .724" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0724-IQ IC908

$151.34
Picture of ISCAR H3P 0717-IQ IC908 .717" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0717-IQ IC908 .717" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0717-IQ IC908

$151.34
Picture of ISCAR H3P 0764-IQ IC908 .764" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0764-IQ IC908 .764" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0764-IQ IC908

$151.34
Picture of ISCAR H3P 0776-IQ IC908 .776" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0776-IQ IC908 .776" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0776-IQ IC908

$151.34
Picture of ISCAR ICP 1004 IC908 1.004" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1004 IC908 1.004" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1004 IC908

$151.34
Picture of ISCAR ICP 1020 IC908 1.020" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1020 IC908 1.020" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1020 IC908

$151.34
Picture of ISCAR H3P 0752-IQ IC908 .752" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0752-IQ IC908 .752" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0752-IQ IC908

$151.34
Picture of ISCAR ICP 0980 IC908 .980" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0980 IC908 .980" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0980 IC908

$151.34
Picture of ISCAR ICP 1024 IC908 1.024" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1024 IC908 1.024" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1024 IC908

$151.34
Picture of ISCAR H3P 0760-IQ IC908 .760" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0760-IQ IC908 .760" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0760-IQ IC908

$151.34
Picture of ISCAR ICP 0972 IC908 .972" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0972 IC908 .972" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0972 IC908

$151.34
Picture of ISCAR H3P 0744-IQ IC908 .744" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0744-IQ IC908 .744" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0744-IQ IC908

$151.34
Picture of ISCAR ICP 1008 IC908 1.008" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1008 IC908 1.008" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1008 IC908

$151.34
Picture of ISCAR ICP 1016 IC908 1.016" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1016 IC908 1.016" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1016 IC908

$151.34
Picture of ISCAR ICP 1000 IC908 1.000" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1000 IC908 1.000" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1000 IC908

$151.34
Picture of ISCAR ICP 0953 IC908 .953" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0953 IC908 .953" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0953 IC908

$151.34
Picture of ISCAR ICP 0949 IC908 .949" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0949 IC908 .949" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0949 IC908

$151.34
Picture of ISCAR H3P 0772-IQ IC908 .772" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0772-IQ IC908 .772" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0772-IQ IC908

$151.34
Picture of ISCAR MM ECF45-160-6T10 IC908 DIA 3MM SH T10 LOC 0.2560 OAL 1.2700 Countersink,Replacable Head Carbide TiAlN Single End Countersink MULTI-MASTER

ISCAR MM ECF45-160-6T10 IC908 DIA 3MM SH T10 LOC 0.2560 OAL 1.2700 Countersink,Replacable Head Carbide TiAlN Single End Countersink MULTI-MASTER

$151.34
Picture of ISCAR ICP 1012 IC908 1.012" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 1012 IC908 1.012" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 1012 IC908

$151.34
Picture of ISCAR ICP 0957 IC908 .957" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0957 IC908 .957" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0957 IC908

$151.34
Picture of ISCAR H3P 0728-IQ IC908 .728" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0728-IQ IC908 .728" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0728-IQ IC908

$151.34
Picture of ISCAR ICP 0961 IC908 .961" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0961 IC908 .961" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0961 IC908

$151.34
Picture of ISCAR H3P 0713-IQ IC908 .713" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0713-IQ IC908 .713" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0713-IQ IC908

$151.34
Picture of ISCAR MM ECF60-04/160-6T10 IC908 DIA 4MM SH T10 LOC 0.3940 OAL 1.2700 Countersink,Replacable Head Carbide TiAlN Single End Countersink MULTI-MASTER

ISCAR MM ECF60-04/160-6T10 IC908 DIA 4MM SH T10 LOC 0.3940 OAL 1.2700 Countersink,Replacable Head Carbide TiAlN Single End Countersink MULTI-MASTER

$151.34
Picture of ISCAR ICP 0988 IC908 .988" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0988 IC908 .988" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0988 IC908

$151.34
Picture of ISCAR ICP 0992 IC908 .992" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0992 IC908 .992" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0992 IC908

$151.34
Picture of ISCAR ICP 0969 IC908 .969" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISCAR ICP 0969 IC908 .969" Exchangeable DCN Drill Heads, for Carbon and Alloy Steel (ISO P Materials)

ISO: ICP 0969 IC908

$151.34
Picture of ISCAR H3P 0768-IQ IC908 .768" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0768-IQ IC908 .768" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0768-IQ IC908

$151.34
Picture of ISCAR H3P 0748-IQ IC908 .748" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISCAR H3P 0748-IQ IC908 .748" Exchangeable 3 Flute Drill ing Heads for Carbon and Alloy Steel (ISO P) and Cast Iron (ISO K)

ISO: H3P 0748-IQ IC908

$151.34
Picture of TUNGALOY VEE062L39R062AU03S10 KS15F DIA 5/8 SH T05 LOC 0.3906 OAL 0.8100End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0620 1.57MM TUNG MEISTER

TUNGALOY VEE062L39R062AU03S10 KS15F DIA 5/8 SH T05 LOC 0.3906 OAL 0.8100End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0620 1.57MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE062L39R031AU03S10 KS15F DIA 5/8 SH T05 LOC 0.3906 OAL 0.8100End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0310 0.79MM TUNG MEISTER

TUNGALOY VEE062L39R031AU03S10 KS15F DIA 5/8 SH T05 LOC 0.3906 OAL 0.8100End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0310 0.79MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE062L39R000AU03S10 KS15F DIA 5/8 SH T06 LOC 0.3906 OAL 0.8100End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Square TUNG MEISTER

TUNGALOY VEE062L39R000AU03S10 KS15F DIA 5/8 SH T06 LOC 0.3906 OAL 0.8100End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Square TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of YG-1 E9990903TF DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal TiAlN Single End Square Sharp Tank-Power End Mill

YG-1 E9990903TF DIA 1 SH 1.00 LOC 4.00 OAL 6.50 End Mill Powder Metal TiAlN Single End Square Sharp Tank-Power End Mill

Call (262) 251-4020 for pricing
Picture of HANITA/WIDIA 4V6516016NW DIA 5/8 SH 0.6250 LOC 1.6250 OAL 4.1250 End Mill Standard Flute High Helix Carbide AlTiN Single End 45.0° Chamfer VariMill I

HANITA/WIDIA 4V6516016NW DIA 5/8 SH 0.6250 LOC 1.6250 OAL 4.1250 End Mill Standard Flute High Helix Carbide AlTiN Single End 45.0° Chamfer VariMill I

Call (262) 251-4020 for pricing
Picture of AWARD KK-201-CO DIA 1/8 SH 0.3750 LOC 0.2500 OAL 2.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

AWARD KK-201-CO DIA 1/8 SH 0.3750 LOC 0.2500 OAL 2.50 End Mill Taper Flute Cobalt Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC516-24UN3FL2X Carbide Thread Mill Helical 5/16" 24.00TPI UN TIALN 0.6460 16.41MM LOC 2.4016 61.00MM OAL

GORILLA MILL GMTMAC516-24UN3FL2X Carbide Thread Mill Helical 5/16" 24.00TPI UN TIALN 0.6460 16.41MM LOC 2.4016 61.00MM OAL

ISO: GMTMAC516-24UN3FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0800MM-1.253FL2X Carbide Thread Mill Helical M8 1.25MM Metric TIALN 0.6640 16.87MM LOC 2.4016 61.00MM OAL

GORILLA MILL GMTMAC0800MM-1.253FL2X Carbide Thread Mill Helical M8 1.25MM Metric TIALN 0.6640 16.87MM LOC 2.4016 61.00MM OAL

ISO: GMTMAC0800MM-1.253FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0800MM-1.253FL1.5X Carbide Thread Mill Helical M8 1.25MM Metric TIALN 0.5240 13.31MM LOC 2.4016 61.00MM OAL

GORILLA MILL GMTMAC0800MM-1.253FL1.5X Carbide Thread Mill Helical M8 1.25MM Metric TIALN 0.5240 13.31MM LOC 2.4016 61.00MM OAL

ISO: GMTMAC0800MM-1.253FL1.5X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC516-18UN3FL2X Carbide Thread Mill Helical 5/16" 18.00TPI UN TIALN 0.6390 16.23MM LOC 2.4016 61.00MM OAL

GORILLA MILL GMTMAC516-18UN3FL2X Carbide Thread Mill Helical 5/16" 18.00TPI UN TIALN 0.6390 16.23MM LOC 2.4016 61.00MM OAL

ISO: GMTMAC516-18UN3FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC38-16UN3FL2X Carbide Thread Mill Helical 3/8" 16.00TPI UN TIALN 0.7810 19.84MM LOC 2.4016 61.00MM OAL

GORILLA MILL GMTMAC38-16UN3FL2X Carbide Thread Mill Helical 3/8" 16.00TPI UN TIALN 0.7810 19.84MM LOC 2.4016 61.00MM OAL

ISO: GMTMAC38-16UN3FL2X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC38-16UN3FL1.5X Carbide Thread Mill Helical 3/8" 16.00TPI UN TIALN 0.5940 15.09MM LOC 2.4016 61.00MM OAL

GORILLA MILL GMTMAC38-16UN3FL1.5X Carbide Thread Mill Helical 3/8" 16.00TPI UN TIALN 0.5940 15.09MM LOC 2.4016 61.00MM OAL

ISO: GMTMAC38-16UN3FL1.5X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC516-18UN3FL1.5X Carbide Thread Mill Helical 5/16" 18.00TPI UN TIALN 0.4720 11.99MM LOC 2.4016 61.00MM OAL

GORILLA MILL GMTMAC516-18UN3FL1.5X Carbide Thread Mill Helical 5/16" 18.00TPI UN TIALN 0.4720 11.99MM LOC 2.4016 61.00MM OAL

ISO: GMTMAC516-18UN3FL1.5X

Call (262) 251-4020 for pricing
Picture of GORILLA MILL GMTMAC0800MM-1.003FL2X Carbide Thread Mill Helical M8 1.00MM Metric TIALN 0.6500 16.51MM LOC 2.4016 61.00MM OAL

GORILLA MILL GMTMAC0800MM-1.003FL2X Carbide Thread Mill Helical M8 1.00MM Metric TIALN 0.6500 16.51MM LOC 2.4016 61.00MM OAL

ISO: GMTMAC0800MM-1.003FL2X

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0680AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.267 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0680AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.267 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0680AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCL2460AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.246 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCL2460AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.246 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCL2460AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0610AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.240 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0610AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.240 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0610AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0640AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.252 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0640AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.252 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0640AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0620AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.244 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0620AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.244 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0620AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0700AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.275 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0700AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.275 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0700AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0660AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.259 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0660AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.259 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0660AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0670AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.263 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0670AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.263 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0670AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0650AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.255 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0650AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.255 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0650AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0630AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.248 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0630AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.248 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0630AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCL2610AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.261 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCL2610AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.261 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCL2610AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCL2420AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.242 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCL2420AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.242 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCL2420AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCL2656AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.265 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCL2656AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.265 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCL2656AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCL2500AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.250 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCL2500AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.250 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCL2500AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCL2570AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.257 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCL2570AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.257 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCL2570AP

Call (262) 251-4020 for pricing
Picture of M.A. FORD CXDCLM0690AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.271 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

M.A. FORD CXDCLM0690AP Carbide Drill Coolant Thru Carbide 140° - 142° 0.271 Dia 0.315 Shank 4.645 OAL 2 Flute 2.992 Flute Length Carbide AlTiN

ISO: CXDCLM0690AP

Call (262) 251-4020 for pricing
Picture of YG-1 G9D77120 DIA 12MM SH 0.4724 LOC 0.7087 OAL 3.2677 End Mill Carbide TiAlN Single End Corner Radius 0.0197 0.50MM X-SPEED End Mill

YG-1 G9D77120 DIA 12MM SH 0.4724 LOC 0.7087 OAL 3.2677 End Mill Carbide TiAlN Single End Corner Radius 0.0197 0.50MM X-SPEED End Mill

Call (262) 251-4020 for pricing
Picture of IMCO 63693 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.4646 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

IMCO 63693 DIA 10MM SH 0.3937 LOC 1.5748 OAL 3.4646 End Mill Standard Flute Standard Helix Carbide AlCrN Single End Corner Radius 0.0394 1.00MM Pow-R-Path Mill

Call (262) 251-4020 for pricing
Picture of AWARD K-1624 DIA 1 SH 1.00 LOC 6.00 OAL 8.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

AWARD K-1624 DIA 1 SH 1.00 LOC 6.00 OAL 8.50 End Mill Taper Flute HSS Uncoated Single End Square Sharp

Call (262) 251-4020 for pricing
Picture of TUNGALOY VSTD16L100S10-S DIA 16MM SH 0.6299 LOC 3.9370 OAL 3.9370 Replacable Head Acc. Straight Shank/Slotting Heads Steel Single End TUNG MEISTER

TUNGALOY VSTD16L100S10-S DIA 16MM SH 0.6299 LOC 3.9370 OAL 3.9370 Replacable Head Acc. Straight Shank/Slotting Heads Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of YG-1 67905 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal Uncoated Single End Corner Radius 0.0900 2.29MM ASP

YG-1 67905 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal Uncoated Single End Corner Radius 0.0900 2.29MM ASP

Call (262) 251-4020 for pricing
Picture of TUNGALOY VSSD16L100S10-S DIA 15.20MM SH 0.6299 LOC 0.7874 OAL 3.93Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End TUNG MEISTER

TUNGALOY VSSD16L100S10-S DIA 15.20MM SH 0.6299 LOC 0.7874 OAL 3.93Replacable Head Acc. Straight Neck/Cylicrical Shank Steel Single End TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of YG-1 67904 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal Uncoated Single End Corner Radius 0.0600 1.52MM ASP

YG-1 67904 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal Uncoated Single End Corner Radius 0.0600 1.52MM ASP

Call (262) 251-4020 for pricing
Picture of YG-1 67906 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal Uncoated Single End Corner Radius 0.1200 3.05MM ASP

YG-1 67906 DIA 3/4 SH 0.7500 LOC 3.00 OAL 5.2500 End Mill Powder Metal Uncoated Single End Corner Radius 0.1200 3.05MM ASP

Call (262) 251-4020 for pricing
Picture of AWARD BM-316 DIA 3/16 SH 0.6250 LOC 4.00 OAL 6.1250 End Mill Taper Flute HSS Uncoated Single End Ball Nose

AWARD BM-316 DIA 3/16 SH 0.6250 LOC 4.00 OAL 6.1250 End Mill Taper Flute HSS Uncoated Single End Ball Nose

Call (262) 251-4020 for pricing
Picture of EMUGE 3444L.08004A DIA 4MM SH 0.3937 LOC 0.3150 OAL 3.1496 End Mill Taper Flute Carbide AlCrN Single End Corner Radius 0.0157 0.40MM Turbine Program

EMUGE 3444L.08004A DIA 4MM SH 0.3937 LOC 0.3150 OAL 3.1496 End Mill Taper Flute Carbide AlCrN Single End Corner Radius 0.0157 0.40MM Turbine Program

Call (262) 251-4020 for pricing
Picture of VIKING 16771 1-5/16 Annular Drill 1 Length Of Cut Gold Coated

VIKING 16771 1-5/16 Annular Drill 1 Length Of Cut Gold Coated

Call (262) 251-4020 for pricing
Picture of YMW 389645 1/2-14.00TPI Pipe Spiral Flute Pipe Cobalt M42 Uncoated

YMW 389645 1/2-14.00TPI Pipe Spiral Flute Pipe Cobalt M42 Uncoated

Call (262) 251-4020 for pricing
Picture of YG-1 TD310 Carbide Thread Mill M6 1.00MM 0.170 Dia 2.500 OAL

YG-1 TD310 Carbide Thread Mill M6 1.00MM 0.170 Dia 2.500 OAL

Call (262) 251-4020 for pricing
Picture of YG-1 TE400 Carbide Thread Mill 1/4" 20.00TPI 0.180 Dia 2.500 OAL

YG-1 TE400 Carbide Thread Mill 1/4" 20.00TPI 0.180 Dia 2.500 OAL

Call (262) 251-4020 for pricing
Picture of YG-1 TE420 Carbide Thread Mill 1/4" 28.00TPI 0.180 Dia 2.500 OAL

YG-1 TE420 Carbide Thread Mill 1/4" 28.00TPI 0.180 Dia 2.500 OAL

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE160L10.0R10A03S10 KS15F DIA 16MM SH T08 LOC 0.3937 OAL 0.8071End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM TUNG MEISTER

TUNGALOY VEE160L10.0R10A03S10 KS15F DIA 16MM SH T08 LOC 0.3937 OAL 0.8071End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0394 1.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE160L10.0R20A03S10 KS15F DIA 16MM SH T10 LOC 0.3937 OAL 0.8071End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM TUNG MEISTER

TUNGALOY VEE160L10.0R20A03S10 KS15F DIA 16MM SH T10 LOC 0.3937 OAL 0.8071End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Corner Radius 0.0787 2.00MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY VEE160L10.0R00A03S10 KS15F DIA 16MM SH T12 LOC 0.3937 OAL 0.8071End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Square TUNG MEISTER

TUNGALOY VEE160L10.0R00A03S10 KS15F DIA 16MM SH T12 LOC 0.3937 OAL 0.8071End Mill,Replacable Head Standard Flute High Helix Carbide Uncoated Single End Square TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of LMT FETTE 1401384 7/16-14.00TPI Cut Spiral Point Plug 3.5P-5.0P HSSE-Powder Metal TiCN +

LMT FETTE 1401384 7/16-14.00TPI Cut Spiral Point Plug 3.5P-5.0P HSSE-Powder Metal TiCN +

Call (262) 251-4020 for pricing
Picture of YMW 382695 7/8-9.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Steam Oxide

YMW 382695 7/8-9.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Steam Oxide

Call (262) 251-4020 for pricing
Picture of YMW 382996B 7/8-14.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Uncoated

YMW 382996B 7/8-14.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Uncoated

Call (262) 251-4020 for pricing
Picture of YMW 382696 7/8-14.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Steam Oxide

YMW 382696 7/8-14.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Steam Oxide

Call (262) 251-4020 for pricing
Picture of YMW 382699 7/8-14.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Steam Oxide

YMW 382699 7/8-14.00TPI Cut Spiral Point Plug 3.0P-5.0P HSSE-V Steam Oxide

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECR100B4M-20W10-72 AH725 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TECR100B4M-20W10-72 AH725 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECR080B3-12/40C08R02A78 KS15F DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.0709 End Mill Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

TUNGALOY TECR080B3-12/40C08R02A78 KS15F DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.0709 End Mill Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECR100B4M-20C10-72 AH725 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

TUNGALOY TECR100B4M-20C10-72 AH725 DIA 10MM SH 0.3937 LOC 0.7874 OAL 2.8346 End Mill Carbide TiAlN Single End 45.0° Chamfer TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of TUNGALOY TECR080B3-12/40W08R02A78 KS15F DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.0709 End Mill Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

TUNGALOY TECR080B3-12/40W08R02A78 KS15F DIA 8MM SH 0.3150 LOC 0.4724 OAL 3.0709 End Mill Carbide Uncoated Single End Corner Radius 0.0079 0.20MM TUNG MEISTER

Call (262) 251-4020 for pricing
Picture of ISCAR ICP 0815-2M IC908 .815" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0815-2M IC908 .815" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0815-2M IC908

$150.49
Picture of ISCAR ICP 0866-2M IC908 .866" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0866-2M IC908 .866" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0866-2M IC908

$150.49
Picture of ISCAR QCP 0866-2M IC908 .866" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0866-2M IC908 .866" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0866-2M IC908

$150.49
Picture of ISCAR ICP 0839-2M IC908 .839" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0839-2M IC908 .839" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0839-2M IC908

$150.49
Picture of ISCAR QCP 0846-2M IC908 .846" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0846-2M IC908 .846" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0846-2M IC908

$150.49
Picture of ISCAR ICP 0811-2M IC908 .811" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR ICP 0811-2M IC908 .811" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: ICP 0811-2M IC908

$150.49
Picture of ISCAR QCP 0815-2M IC908 .815" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISCAR QCP 0815-2M IC908 .815" Double Margin Drill ing Heads for DCN Drill s for Machining Steel with High Surface Finish Results

ISO: QCP 0815-2M IC908

$150.49